
Lre avio daq2
IITB-Rocket-Team-Avionics/Ember
Experimental Flight Computer with potential mitigations of previous issues faced by FLYTE and a testbed for new systems.

Tele board is an open-source printed circuit board by ParasGore, from the ParasGore/Rocket-Team---NDTU repository on GitHub. It is a 4-layer board of 67.7 × 97.2 mm with 140 parts on 161 nets, routed with 1,497 tracks and 130 vias.
It is built around the E22-900M30S, TCAN332D and ADS1115IDGS, with the AP63200WU, BMP280 and MMC5983MA among its other parts. Its parts include 54 capacitors, 40 resistors, 15 ICs, 13 connectors and 2 transistors. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C13, C14, C18, C19, C22, C24, C26, C29, C30, C32, C36, C38, C46, C47 +8 |
| 18 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R11, R15, R18, R19, R20, R21, R22, R23, R27, R31, R32, R35, R36, R37 +2 |
| 9 | 10uF | Capacitor_SMD:C_0603_1608Metric | C15, C16, C17, C23, C27, C28, C39, C50, C54 |
| 5 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7, C12, C31, C33, C45 |
| 5 | Conn_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J6, J7, J9, J10, J11 |
| 4 | , , , | ||
| 4 | 4.7k | Resistor_SMD:R_0603_1608Metric | R3, R4, R28, R29 |
| 4 | 47pF | Capacitor_SMD:C_0603_1608Metric | C40, C41, C43, C44 |
| 3 | 22uF | Capacitor_SMD:C_0603_1608Metric | C20, C21, C25 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R40, R42 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | 33k | Resistor_SMD:R_0603_1608Metric | R41, R43 |
| 2 | 37 | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | 42.2k | Resistor_SMD:R_0603_1608Metric | R34, R39 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 60 | Resistor_SMD:R_0603_1608Metric | R24, R25 |
| 2 | Conn_01x02_Pin | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J4, J5 |
| 2 | ESDCAN02-2BWY | ESDCAN02-2BWY:SOT323-3L_STM | CR1, CR2 |
| 2 | SISA96DN-T1-GE3 | NewLib:SIS862DNT1GE3 | Q1, Q2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C48 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 100uF | Capacitor_SMD:C_0603_1608Metric | C35 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C34 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 2.2uH | Inductor_SMD:L_Coilcraft_XAL4020-XXX | L2 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 32.4k | Resistor_SMD:R_0603_1608Metric | R33 |
| 1 | 4.7nF | Capacitor_SMD:C_0603_1608Metric | C42 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C37 |
| 1 | 4.7uH | Inductor_SMD:L_Coilcraft_XAL4020-XXX | L1 |
| 1 | 56.2k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 80k | Resistor_SMD:R_0603_1608Metric | R38 |
| 1 | ABMM2-8MHz | NewLib:CRYSTAL_ABMM2_ABR | Y2 |
| 1 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U14 |
| 1 | AP63200WU | Package_TO_SOT_SMD:TSOT-23-6 | U10 |
| 1 | BMI088 | Package_LGA:Bosch_LGA-16_4.5x3mm_P0.5mm_LayoutBorder7x1y_ClockwisePinNumbering | U4 |
| 1 | BMP280 | Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U2 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J1 |
| 1 | Conn_01x03 | Connector_AMASS:AMASS_MR30PW-M_1x03_P3.50mm_Horizontal | J12 |
| 1 | Conn_01x04 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J8 |
| 1 | Conn_Coaxial_Small | Connector_Coaxial:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J13 |
| 1 | D_Schottky | Diode_SMD:D_SOD-128 | D1 |
| 1 | E22-900M30S | NewLib:XCVR_E22-900M30S | U9 |
| 1 | KX134-1211 | NewLib:LGA12_2X2X0P9_ROM-M | U6 |
| 1 | L89 | NewLib:XCVR_L89 | U8 |
| 1 | LI0603G121R-10 | NewLib:IND_LI0603G121R-10_LRD-M | E1 |
| 1 | LOGO | RT_Graphics:Ember_logo | G*** |
| 1 | LOGO | RT_Graphics:RT_logo | G*** |
| 1 | LOGO | RT_Graphics:NTDU_V1_Quirky_Cameleon | G*** |
| 1 | MMC5983MA | NewLib:PQFN50P300X300X100-16N | U5 |
| 1 | MPXV5100DP | NewLib:MPXV5100DP | IC1 |
| 1 | MS5611-01BA | Package_LGA:LGA-8_3x5mm_P1.25mm | U3 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J3 |
| 1 | STM32H573VITx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | TCAN332 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U13 |
| 1 | TPS2121RUXR | NewLib:IC_TPS2121RUXR | U15 |
| 1 | TPS62162DSG | Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U7 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | W25Q256JVEIQ_TR | NewLib:W25Q256JVEIQ | U11 |

IITB-Rocket-Team-Avionics/Ember
Experimental Flight Computer with potential mitigations of previous issues faced by FLYTE and a testbed for new systems.



sch.kicad_pcb.jpg?size=s&soon)
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!


dmanla/AccessibilityHeadsetDevkit
A development kit for the creation of an accessibility driven platform.

EdSmithe/meniscus-controller
Closed-loop meniscus pressure controller for inkjet printing: custom KiCad PCB, Arduino control firmware, Python GUI
It measures 67.7 × 97.2 mm and has 4 copper layers, 1.61 mm thick.
140 parts, built around the E22-900M30S, TCAN332D, ADS1115IDGS and AP63200WU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ParasGore/Rocket-Team---NDTU repository on GitHub, at the commit this page was made from: the board is NDTU/Tele board.kicad_pcb and its schematic NDTU/Tele board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ParasGore before reusing the design.