Skip to the content
VQFN-HR-12(2x2.5)

TPS2121RUXR

Texas InstrumentsExtended

-40℃~+125℃ 2.8V~22V 200uA 56mΩ VQFN-HR-12(2x2.5) ORing Controllers ROHS

Part id
ti/TPS2121RUXR
Category
Battery Management
Package
VQFN-HR-12(2x2.5)
Pins
12
In stock
25,926 at JLCPCB (C485916)
Used on
86 open-source boards

Overview

The TPS2121RUXR is a battery Management made by Texas Instruments in a VQFN-HR-12(2x2.5) package with 12 pins. -40℃~+125℃ 2.8V~22V 200uA 56mΩ VQFN-HR-12(2x2.5) ORing Controllers ROHS.

PCBKit's library has its KiCad symbol (corpus:TPS2121RUXR_16c99e0f, from open boards on GitHub), ready for a KiCad board. 25,926 are in stock at JLCPCB (part C485916). 86 open-source boards in 62 repositories on GitHub use it.

Symbol

1VOUT_112GND2VIN23CP24OV25OV17VIN18VOUT_210ILIM11SS6PR19ST
corpus:TPS2121RUXR_16c99e0fFrom open boards on GitHub

Footprint

The library has no footprint for this part yet.

From the datasheet

15
Supply, least
2.8 V · IN1, IN2, recommended operating minimum · p. 6
Supply, most
22 V · IN1, IN2, recommended operating maximum · p. 6
Supply, absolute maximum
24 V · IN1, IN2, absolute maximum · p. 6
Junction, hottest
125 °C · maximum recommended junction temperature · p. 6
Takes working
300 µA · typical powering-input quiescent current, OUT open · p. 7
Takes asleep
15 µA · typical standby current of input not powering OUT, 25°C · p. 7
Gives
4.5 A · maximum continuous current through selected input · p. 6
Current limit
5.2 A · typical output current limit, RILM = 18.7kΩ · p. 8
Current limit
4.5 A · typical output current limit, RILM = 22.1kΩ · p. 8
Current limit
3.5 A · typical output current limit, RILM = 29.8kΩ · p. 8
Current limit
2.5 A · typical output current limit, RILM = 44.2kΩ · p. 8
Current limit
1.5 A · typical output current limit, RILM = 80kΩ · p. 8
Junction to air (RNW (PKG FAM))
72.2 K/W · junction-to-ambient thermal resistance · p. 6
Junction to case (RNW (PKG FAM))
38.5 K/W · junction-to-case top thermal resistance · p. 7
Junction to board (RNW (PKG FAM))
15.4 K/W · junction-to-board thermal resistance · p. 7

What it is and has

10
On resistance
56 mΩ typical · p. 1
Adjustable overvoltage supervisor
OVx · p. 1
Adjustable priority supervisor
PR1 · p. 1
Output current limit
1 A – 4.5 A, adjustable · p. 1
Channel status indication
ST · p. 1
Input settling time
Adjustable through SS · p. 1
Output soft start time
Adjustable through SS · p. 1
Manual input source selection
OVx · p. 1
Protection
Over temperature protection · p. 1
Package
VQFN-HR (12), 2.0 mm x 2.5 mm · p. 1

Specifications

59
ParameterConditionsAs printedPage
Maximum Power Pin Voltage VIN1 , VIN2 , VOUTIN1, IN2, OUTmin -0.3 · max 24 V6
Maximum Overvoltage Pin Voltage VOV1 , VOV2OV1, OV2min -0.3 · max 6 V6
Maximum Control Pin Voltage VPRI , VSELPRI, SELmin -0.3 · max 6 V6
Maximum Control Pin Voltage VSTSTmin -0.3 · max 6 V6
Storage temperature TSTGmin -65 · max 150 °C6
Electrostatic discharge VESDAll pins; Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 Vmax 2000 V6
Electrostatic discharge VESDAll pins; Charged device model (CDM), per JEDEC specification JESD22-C101; ±500 Vmax 500 V6
Input Voltage Range(1) VIN1 , VIN2IN1, IN2min 2.8 · max 22 V6
Output Voltage Range VOUTOUTmin 0 · max 22 V6
Overvoltage Pin Voltage VOV1 , VOV2OV1, OV2min 0 · max 5.5 V6
Control Pin Voltage VPRI , VSELPRI, SELmin 0 · max 5.5 V6
Control Pin Voltage VSTSTmin 0 · max 5.5 V6
Status Pin Pull Up Resistance RSTSTmin 6 · max 20 kΩ6
Current Limit Resistance RILMILMmin 18 · max 100 kΩ6
SS Pin Output Voltage VSSSSmax 4 V6
TPS2121 Continuous Input Current IIN1 , IIN2TPS2121; IN1, IN2max 4.5 A6
Junction temperature TJmin -40 · max 125 °C6
Junction-to-ambient thermal resistance RθJATPS2121; RNW (PKG FAM); 11 PINStyp 72.2 °C/W6
Junction-to-case (top) thermal resistance RθJC(top)TPS2121; RNW (PKG FAM); 11 PINStyp 38.5 °C/W7
Junction-to-board thermal resistance RθJBTPS2121; RNW (PKG FAM); 11 PINStyp 15.4 °C/W7
Junction-to-top characterization parameter ΨJTTPS2121; RNW (PKG FAM); 11 PINStyp 0.9 °C/W7
Junction-to-board characterization parameter ΨJBTPS2121; RNW (PKG FAM); 11 PINStyp 15.5 °C/W7
Quiescent Current (INx Powering OUT) (1) IQ, INxOUT = Open; TJ = -40°C to 125°Ctyp 300 · max 400 uA7
Standby Current (INx not powering OUT)(1) ISBY, INxVOUT = VINx; TJ = 25°Cmin 0 · typ 15 · max 25 uA7
Standby Current (INx not powering OUT)(1) ISBY, INxVOUT = VINx; TJ = -40°C to 125°Cmax 25 uA7
Leakage Current (INx to OUT) ILK, INx|VINx - VOUT| ≤ 5V; TJ = 25°Cmin -1 · max 1 uA7
Leakage Current (INx to OUT) ILK, INx|VINx - VOUT| ≤ 5V; TJ = -40°C to 85°Cmin -5 · max 5 uA7
Leakage Current (INx to OUT) ILK, INx|VINx - VOUT| ≤ 5V; TJ = -40°C to 125°Cmin -80 · max 80 uA7
Leakage Current (INx to OUT) ILK, INx|VINx - VOUT| ≤ 22V; TJ = 25°Cmin -1 · max 1 uA7
Leakage Current (INx to OUT) ILK, INx|VINx - VOUT| ≤ 22V; TJ = -40°C to 85°Cmin -35 · max 35 uA7
Leakage Current (INx to OUT) ILK, INx|VINx - VOUT| ≤ 22V; TJ = -40°C to 125°Cmin -500 · max 500 uA7
Undervoltage Lockout VUV, INxVINx Rising; TJ = -40°C to 125°Cmin 2.5 · typ 2.65 · max 2.8 V7
Undervoltage Lockout VUV, INxVINx Falling; TJ = -40°C to 125°Cmin 2.4 · typ 2.55 · max 2.7 V7
Switchover Time tSWVOUT < VINx; CP2 or SEL < VREF; TJ = -40°C to 125°Ctyp 100 us7
Fast Switchover Time (TPS2121 only) tFSWTPS2121; VOUT < VINx; CP2 ≥ VREF; TJ = -40°C to 125°Ctyp 5 us7
Input Voltage Comparator (VIN2 referenced to VIN1) VCOMPVIN1 ≥ VIN2; TJ = -40°C to 125°Cmin 0 · typ 280 · max 600 mV7
Input Voltage Comparator (VIN2 referenced to VIN1) VCOMPVIN1 > VIN2, Falling Hysteresis; TJ = -40°C to 125°Cmin 2.5 · typ 3.5 · max 4.5 %7
ON-State Resistance (TPS2121) RONTPS2121; IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; TJ = 25°Ctyp 56 · max 70 mΩ7
ON-State Resistance (TPS2121) RONTPS2121; IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; TJ = -40°C to 85°Cmax 85 mΩ7
ON-State Resistance (TPS2121) RONTPS2121; IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; TJ = -40°C to 105°Cmax 90 mΩ7
ON-State Resistance (TPS2121) RONTPS2121; IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; TJ = -40°C to 125°Cmax 100 mΩ7
Output Current Limit (TPS2121) ILMTPS2121; RILM = 18.7kΩ; TJ = -40°C to 125°Cmin 4.6 · typ 5.2 · max 5.8 A8
Output Current Limit (TPS2121) ILMTPS2121; RILM = 22.1kΩ; TJ = -40°C to 125°Cmin 4 · typ 4.5 · max 5 A8
Output Current Limit (TPS2121) ILMTPS2121; RILM = 29.8kΩ; TJ = -40°C to 125°Cmin 3 · typ 3.5 · max 4 A8
Output Current Limit (TPS2121) ILMTPS2121; RILM = 44.2kΩ; TJ = -40°C to 125°Cmin 2 · typ 2.5 · max 3 A8
Output Current Limit (TPS2121) ILMTPS2121; RILM = 80kΩ; TJ = -40°C to 125°Cmin 1 · typ 1.5 · max 2 A8
Output Current Limit (TPS2121) ILMTPS2121; RILM < 1kΩ; TJ = -40°C to 125°Cmin 1.5 · typ 2.5 · max 3.5 A8
Current Limit Response Time tLMOutput Steady State; TJ = -40°C to 125°Ctyp 250 us8
Internal Voltage Reference VREF, xVPR1, VCP2, VOV1, VOV2 Rising; TJ = -40°C to 125°Cmin 1.01 · typ 1.06 · max 1.1 V8
Internal Voltage Reference VREF, xVPR1, VCP2, VOV1, VOV2 Falling; TJ = -40°C to 125°Cmin 0.99 · typ 1.04 · max 1.09 V8
Comparator Offset Voltage (TPS2121 only) VOFSTTPS2121; VPR1 > VREF; VCP2 > VREF; TJ = -40°C to 125°Cmin 5 · typ 20 · max 40 mV8
Pin Leakage Current ILK, xVPR1, VCP2, VOV1, VOV2 = 0 V to 5.5 V; TJ = -40°C to 125°Cmin -0.1 · max 0.1 uA8
Pin Leakage ILK, STVST = 0 V to 5.5 V; TJ = -40°C to 125°Cmin -0.1 · max 0.1 uA8
Status Delay tSTL to H; TJ = -40°C to 125°Ctyp 1 us8
Fast Reverse Current Detection Threshold IRCBVOUT > VINx; TJ = -40°C to 125°Cmin 0.2 · typ 1 · max 2 A8
RCB Release Voltage VRCBVOUT > VINx; TJ = -40°C to 125°Cmin 0 · typ 25 · max 50 mV8
Fast Reverse Current Blocking Response Time tRCBTJ = -40°C to 125°Ctyp 10 us8
Thermal Shutdown TSDShutdown; Risingtyp 160 °C8
Thermal Shutdown TSDRecovery; Fallingtyp 150 °C8

Pins, by the datasheet

11
1 OUT
Power Output. · p. 4
2 IN2
Power Input for Source 2. · p. 4
4 OV2
Active Low Enable Supervisor for IN2 Overvoltage Protection; connect to GND if not required. · p. 4
5 OV1
Active Low Enable Supervisor for IN1 Overvoltage Protection; connect to GND if not required. · p. 4
6 PR1
Enables Priority Operation; connect to IN1 to set switchover voltage, or GND if not required. · p. 4
7 IN1
Power Input for Source 1. · p. 4
8 OUT
Power Output. · p. 4
9 ST
Status output indicating which channel is selected; connect to GND if not required. · p. 4
10 ILIM
Output Current Limiting for both channels. · p. 4
11 SS
Adjusts Input Setting Delay Time and Output Soft Start Time. · p. 4
12 GND
Device Ground. · p. 4

Open-source boards using it

86See all 86
  • 4 layers66.4 × 66.4 mmRera, the printed circuit board in 3D

    Rera

    fdiwth/tvc-drone

    This repository contains the documentation, hardware designs, and source code for a Thrust Vector Control (TVC) drone.

    140 parts34GPL-3.0
  • 6 layers39.5 × 39.5 mmP4eregrine, the printed circuit board in 3D

    P4eregrine

    anticitizn/p4eregrine

    All-in-one ESP32 P4-based drone ESC, flight controller, and video processor

    359 parts21
  • 4 layers81.3 × 52.8 mmGlue Board, the printed circuit board in 3D

    Glue Board

    arkorobotics/robocar-pinky

    DIY Robocar Project - Codename Pinky

    87 parts12
  • 4 layers144.3 × 143.8 mmCheep boards, the printed circuit board in 3D

    Cheep boards

    esl-epfl/HEEPidermis

    278 parts12
  • 4 layers47 × 45 mmBITSv5, the printed circuit board in 3D

    BITSv5

    UMDBPP/command_module

    Documentation and Design work for the command module payload

    104 parts4
  • 4 layers37 × 37 mmFlight controller, the printed circuit board in 3D

    Flight controller

    AQUA-Warrior/fpv-drone

    Frame needs to be printed using nylon/nylon with carbon fiber only exclusions being ArmAbsorber1-4 and AntenaMount/GPSConnector.

    125 parts3CC-BY-SA-4.0
  • 4 layers50 × 70 mmRp569, the printed circuit board in 3D

    Rp569

    kelu124/rp569

    RP569 - PIOs to usb3 ( rp2350 x ch569 )

    146 parts3
  • 4 layers100 × 100 mmPS BPSLeader, the printed circuit board in 3D

    PS BPSLeader

    lhr-solar/PS-BPSLeader

    Reads voltage, temperature, and current of the main battery pack from the Segment Monitoring Board and HV Carrier boards to ensure the battery remains in a safe state.

    388 parts3MIT

Questions

Is there a KiCad symbol and footprint for the TPS2121RUXR?

Yes. The symbol is corpus:TPS2121RUXR_16c99e0f, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS2121RUXR?

VQFN-HR-12(2x2.5), with 12 pins.

Where is the TPS2121RUXR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS2121RUXR?

JLCPCB lists it as part C485916, with 25,926 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TPS2121RUXR?

86 boards in 62 repositories on GitHub; the most starred are listed on this page, with their KiCad files.