Skip to the content
9

TPS62162DSG

Texas Instruments

3V-17V 1A Step-Down Converter, High Accuracy, with DCS-Control Output Voltage 3.3V

Part id
ti/TPS62162DSG
Category
Uncategorised
Package
SON8
Pins
9
Used on
30 open-source boards

Overview

The TPS62162DSG is an uncategorised made by Texas Instruments in a SON8 package with 9 pins. 3V-17V 1A Step-Down Converter, High Accuracy, with DCS-Control Output Voltage 3.3V.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS62162DSG, from KiCad's library) and its footprint (Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm, from KiCad's library), ready for a KiCad board. 30 open-source boards in 28 repositories on GitHub use it.

Symbol

1PGND2VIN3EN4AGND5FB6VOS7SW8PG9PAD
Regulator_Switching:TPS62162DSGFrom KiCad's library

Footprint

9
Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mmFrom KiCad's library

Pinout

9
The pins of the TPS62162DSG
PinNameType
1PGNDPower in
2VINPower in
3ENInput
4AGNDPower in
5FBInput
6VOSInput
7SWOutput
8PGOpen collector
9PADPower in

Open-source boards using it

30See all 30
  • 2 layers65 × 40 mmLaserProjector REV 04, the printed circuit board in 3D

    LaserProjector REV 04

    stanleyondrus/LaserProjectorV2

    LaserProjector V2 is a battery-powered, ESP32-based laser XY scanner using stepper motors to deflect the beam. It has auto-homing functionality, and can be controlled wirelessly (Wi-Fi & Bluetooth).

    46 parts125
  • 4 layers101.6 × 53.3 mmH730duino, the printed circuit board in 3D

    H730duino

    martinribelotta/h730duino

    STM32H7 Arduino form factor and software compatible board

    111 parts47MIT
  • 4 layers29.1 × 44 mmOpenDrift Pdb, the printed circuit board in 3D

    OpenDrift Pdb

    doublej380-pixel/OpenDriftRC

    Open source drift gyro based on Waveshare ESP32-S3 1.64inch AMOLED touch display development board

    12 parts6GPL-3.0
  • 2 layers93.3 × 128.4 mmMonpolyElectronicV2, the printed circuit board in 3D

    MonpolyElectronicV2

    Pegoku/Monopoly-Electronic-V2

    Gameplay focuses on NFC interaction instead of menus.

    104 parts5
  • 2 layers30 × 30 mmSlimeVR Tracker, the printed circuit board in 3D

    SlimeVR Tracker

    xuan25/SlimeVR-Tracker-HW

    Hardware design of my SlimeVR Tracker

    61 parts5MIT
  • 4 layers59 × 34.5 mmPump controller, the printed circuit board in 3D

    Pump controller

    nfranzwa/OscillatingPump

    Pump

    53 parts2Apache-2.0
  • 4 layers88 × 94.5 mmRT1050, the printed circuit board in 3D

    RT1050

    NortheasternSatelliteLab/ADCS-Camera-Payload-Board

    209 parts2
  • 2 layers51 × 21 mmZenCore, the printed circuit board in 3D

    ZenCore

    Keyaan-07/ZenCore

    A pico-sized STM32 Devboard with a μSD card reader!

    34 parts1MIT

Parts like it

5

Questions

Is there a KiCad symbol and footprint for the TPS62162DSG?

Yes. The symbol is Regulator_Switching:TPS62162DSG and the footprint Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS62162DSG?

SON8, with 9 pins. Its footprint is drawn on this page.

What can replace the TPS62162DSG?

Parts like it in the library: the OPA858IDSG by Texas Instruments, the OPA859IDSG by Texas Instruments, the TMP1075DSG by Texas Instruments and the TPS62163DSG by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS62162DSG?

30 boards in 28 repositories on GitHub; the most starred are listed on this page, with their KiCad files.