
Proves prime mainboard v1
proveskit/proves-prime-mainboard
Trying out a single board implementation for the PROVES Kit again!

RT1050 is an open-source printed circuit board by NortheasternSatelliteLab, from the NortheasternSatelliteLab/ADCS-Camera-Payload-Board repository on GitHub. It is a 4-layer board of 88 × 94.5 mm with 209 parts on 269 nets, routed with 3,276 tracks and 453 vias.
It is built around the MIMXRT1052CVJ5B, STSPIN250 and S26KL512SDABHV020, with the TPS62162DSG, PRTR5V0U2X and 93LC66BT-I/SN among its other parts. Its parts include 84 capacitors, 66 resistors, 18 ICs, 11 connectors and 3 inductors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R3, R10, R16, R17, R18, R20, R22, R25, R26, R27, R28, R29, R30, R31, R32 +15 |
| 23 | 0.22uF | Capacitor_SMD:C_0201_0603Metric | C1, C2, C3, C4, C5, C11, C13, C15, C17, C18, C20, C25, C26, C27, C29, C31 +7 |
| 13 | 4.7uF | Capacitor_SMD:C_0201_0603Metric | C10, C12, C16, C19, C24, C37, C39, C41, C43, C58, C70, C81, C84 |
| 10 | 100nF | Capacitor_SMD:C_0201_0603Metric | C35, C36, C40, C42, C44, C52, C59, C60, C61, C62 |
| 8 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H3, H4, H5, H6, H7, H8, H9, H10 |
| 7 | 100k | Resistor_SMD:R_0402_1005Metric | R52, R54, R55, R56, R58, R59, R66 |
| 7 | 1k | Resistor_SMD:R_0402_1005Metric | R41, R42, R43, R44, R51, R53, R67 |
| 7 | C_100n_16V_X7R_0402 | Capacitor_SMD:C_0402_1005Metric | C46, C55, C63, C64, C65, C66, C68 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP4, TP5, TP6, TP7, TP8, TP9, TP10 |
| 5 | 10u | Capacitor_SMD:C_0603_1608Metric | C72, C74, C76, C77, C78 |
| 4 | 100nf | Capacitor_SMD:C_0402_1005Metric | C51, C53, C73, C75 |
| 4 | 2.2k | Resistor_SMD:R_0402_1005Metric | R11, R24, R61, R63 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R7, R8, R12, R19 |
| 3 | 0.1uF | Capacitor_SMD:C_0201_0603Metric | C33, C45, C49 |
| 3 | 120k | Resistor_SMD:R_0402_1005Metric | R23, R60, R62 |
| 3 | 22nF | Capacitor_SMD:C_0201_0603Metric | C69, C79, C82 |
| 3 | 3.0k | Resistor_SMD:R_0402_1005Metric | R45, R46, R47 |
| 3 | 330m | Resistor_SMD:R_0402_1005Metric | R14, R15, R64 |
| 3 | C_4u7_0402 | Capacitor_SMD:C_0402_1005Metric | C56, C57, C67 |
| 3 | Conn_01x02_Pin | Connector_JST:JST_SH_BM02B-SRSS-TB_1x02-1MP_P1.00mm_Vertical | J9, J10, J11 |
| 3 | STSPIN250 | footprints:QFN50P300X300X100-17N | U2, U8, U11 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C32, C87 |
| 2 | 1uF | Capacitor_SMD:C_0201_0603Metric | C14, C34 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric | C28, C88 |
| 2 | 30pF | Capacitor_SMD:C_0201_0603Metric | C21, C22 |
| 2 | CMS04TE12L_Q_M | footprints:M-FLAT_TOS | CR1, CR2 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J7 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2, J4 |
| 2 | FB_600Z_0.3A_Murata-BLM15AG_0402 | Inductor_SMD:L_0402_1005Metric | FB1, FB2 |
| 2 | MountingHole | H1, H2 | |
| 2 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | U7, U14 |
| 2 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1, J5 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 18pF | Capacitor_SMD:C_0201_0603Metric | C23 |
| 1 | 1N4151WS | Diode_SMD:D_SOD-323 | D7 |
| 1 | 2.2uH | Resistor_SMD:R_0402_1005Metric | L5 |
| 1 | 220nf | Capacitor_SMD:C_0402_1005Metric | C50 |
| 1 | 30k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 33uF | Capacitor_SMD:C_0805_2012Metric | C30 |
| 1 | 4.7M | Resistor_SMD:R_0402_1005Metric | R57 |
| 1 | 4.7uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 47k | Resistor_SMD:R_0402_1005Metric | R50 |
| 1 | 47uF | Capacitor_SMD:C_0603_1608Metric | C85 |
| 1 | 93LC66BT-I/SN | footprints:SOIC8-N_MC_MCH | U15 |
| 1 | AP22652 | footprints:SOT95P280X145-6N | U9 |
| 1 | ASE-xxxMHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1 |
| 1 | BMI088 | footprints:QFN_BMI085_BOS | U4 |
| 1 | CY15B064J-SXET | footprints:SO8_CY15_CYP | U12 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | Conn_01x20 | Connector_FFC-FPC:Hirose_FH12-20S-0.5SH_1x20-1MP_P0.50mm_Horizontal | J3 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | DNP | Inductor_SMD:L_1206_3216Metric | L2 |
| 1 | DNP | Capacitor_SMD:C_0201_0603Metric | C38 |
| 1 | DSHP04TSGER_C3293144 | footprints:SW-SMD_8P-L6.7-W5.4-P1.27-LS8.4 | U16 |
| 1 | FT2232HQ | Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP4.35x4.35mm | U5 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | IS42S16160J-6BLI | footprints:BGA54C80P9X9_800X800X120 | IC1 |
| 1 | LSM303AGRTR | footprints:LGA12R50P_200X200X100 | U3 |
| 1 | MIMXRT1052CVJ5B | footprints:MAPBGA196_12X12 | U1 |
| 1 | S26KL512SDABHV020 | footprints:BGA24C100P5X5_600X800X100 | IC2 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP6 |
| 1 | TLV1704 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U6 |
| 1 | TPS22992RXPR | footprints:WQFN8_RXP_TEX | U10 |
| 1 | TPS62162DSG | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U13 |
| 1 | TS53YJ203MR10 | footprints:TS53YJ203MR10 | VR1 |

proveskit/proves-prime-mainboard
Trying out a single board implementation for the PROVES Kit again!

proveskit/flight_controller_board
The main flight computer board for the PROVES Kit.

polygnomial/SleepyWoof
PCB for radiation testing the Oresat watchdog timer circuit, using the non-SEP version of the TLV1704 quad comparator

BroncoSpace-Lab/scales-hardware
Hardware design files for the Spacecraft Compartmentalized Autonomous Learning and Edge Computing System (SCALES)

oresat/oresat-c3-hardware
C3 (Command, Communication, and Control) our Command and Data Handling (C&DH) card.

oresat/oresat-adcs-hardware
Controller PCB for OreSat reaction wheels, magnetorquers, IMU, and magnetometers

oresat/oresat-end-cards
Repo for the OreSat +/-Z end cards (Card #1 and #20)

rohamid/siplex-som-s16
A system On Module based on high performance STM32H7 microcontroller
It measures 88 × 94.5 mm and has 4 copper layers, 0.19 mm thick.
209 parts, built around the MIMXRT1052CVJ5B, STSPIN250, S26KL512SDABHV020 and TPS62162DSG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NortheasternSatelliteLab/ADCS-Camera-Payload-Board repository on GitHub, at the commit this page was made from: the board is RT1050.kicad_pcb and its schematic RT1050.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NortheasternSatelliteLab before reusing the design.