AP22652W6

Diodes Incorporated

-40℃~+85℃ 1 2.1A 3V~5.5V 65mΩ Active Low High Side Switch Short-Circuit Protection(SCP)、Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOT-26 Power Distribution Switches ROHS

Extended

Datasheetdiodes/AP22652W6

Category: Power Distribution Switches
Package: SOT-26
Pins: 6

Overview

The AP22652W6 is a power Distribution Switche made by Diodes Incorporated in a SOT-26 package with 6 pins. -40℃~+85℃ 1 2.1A 3V~5.5V 65mΩ Active Low High Side Switch Short-Circuit Protection(SCP)、Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOT-26 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (Analog & Interface:AP22652W6, from CERN's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 9,248 are in stock at JLCPCB (part C2158038). 9 open-source boards in 8 repositories on GitHub use it.

Symbol

Analog & Interface:AP22652W6From CERN's library

Footprint

Package_TO_SOT_SMD:SOT-23-6From KiCad's library

From the datasheet

Supply, least: 3 V · VIN, recommended operating min · p. 4
Supply, most: 5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum: 6 V · IN, absolute max voltage · p. 4
Works from: -40 °C · Operating ambient temperature min · p. 4
Works up to: 85 °C · Operating ambient temperature max · p. 4
Junction, hottest: 150 °C · Junction temperature absolute max · p. 4
Takes working: 140 µA · VIN, typical quiescent current, enabled, OUT open, 5.5 V, RLIM = 20kΩ · p. 5
Takes asleep: 100 nA · VIN, typical shutdown current, disabled, OUT open, 5.5 V · p. 5
Gives: 2.1 A · Continuous output current max, -40°C to +85°C · p. 4
Current limit: 2.665 A · Typical current-limit threshold, RLIM = 10kΩ, TA = +25°C, VIN = 5V, VOUT = 4.5V · p. 5
Current limit: 1.735 A · Typical current-limit threshold, RLIM = 15kΩ, TA = +25°C, VIN = 5V, VOUT = 4.5V · p. 5
Current limit: 1.286 A · Typical current-limit threshold, RLIM = 20kΩ, TA = +25°C, VIN = 5V, VOUT = 4.5V · p. 5
Current limit: 490 mA · Typical current-limit threshold, RLIM = 49.9kΩ, TA = +25°C, VIN = 5V, VOUT = 4.5V · p. 5
Current limit: 125 mA · Typical current-limit threshold, RLIM = 210kΩ, TA = +25°C, VIN = 5V, VOUT = 4.5V · p. 5
A pin gives at most: 25 mA · FAULT, absolute max continuous sink current · p. 4
A pin gives at most: 1 mA · ILIM, absolute max source current · p. 4
Junction to air (W6): 120 K/W · Junction to ambient, High-K board · p. 4
Junction to case (W6): 35 K/W · Junction to case, High-K board · p. 4
Edge: 300 µs · Typical output turn-on rise time, VIN = 3.0V, CL = 1uF, RLOAD = 100Ω · p. 5

What it is and has

Maximum load current: 2.1A · p. 1
Adjustable current limit: 125mA to 2665mA · p. 1
Current-limit accuracy: ±7%, 1.735A with RLIM = 15kΩ · p. 1
Over-current behavior: Constant-current · p. 1
Short-circuit response time: 5µs typical · p. 1
Soft-start: 0.5ms typical rise time · p. 1
Protection: Over-current, output over-voltage and thermal protection · p. 1
Fault report: FAULT with blanking time · p. 1
ESD protection: 2kV HBM, 500V CDM · p. 1
UL recognition: File Number E322375, Vol. 1 · p. 1
Certification: IEC60950-1 CB Scheme Certified · p. 1
Enable: Active low · p. 1

Around it

cap 0.1µF or greater: between IN and GND; Ceramic; place as close to IC as possible. · p. 2
res 10kΩ ≤ RLIM ≤ 210kΩ: between ILIM and GND; 1% resistor to program current limit; keep traces short. · p. 10
cap 0.1μF: between OUT and GND; Bypass capacitor; place close to IC with a high-value capacitor. · p. 2
cap At least 10μF: between OUT and GND; USB application. · p. 2
cap 120µF: between OUT and GND; Output capacitance required for USB. · p. 2
cap 0.01μF to 0.1μF: between IN and GND; X7R or X5R ceramic bypass capacitor, close to device. · p. 11
cap 10μF minimum: between IN and GND; High-value electrolytic capacitor recommended for heavy output load. · p. 11
cap 120µF: between OUT and GND; High-value electrolytic capacitor recommended for heavy output load. · p. 11
cap 0.1μF to 4.7μF: between OUT and GND; Ceramic bypass capacitor improves short-circuit transient immunity and prevents negative output during turn-off. · p. 11

Specifications

Parameter	Conditions	As printed	Page
Human Body Model ESD Protection HBM	TA = +25°C	max 2 kV	4
Charged Device Model ESD Protection CDM	TA = +25°C	max 500 V	4
Surges per IEC61000-4-2. 1999 Applied to Output Terminals of EVM (Note 6) IEC System Level	External output capacitors; pass test only, not a limit	max 15 kV	4
Voltage on IN, OUT, FAULT , ILIM, EN, EN VIN, VOUT, VFAULT, VILIM, VEN	TA = +25°C	min -0.3 · max 6 V	4
Continuous FAULT Sink Current	TA = +25°C	max 25 mA	4
ILIM Source Current	TA = +25°C	max 1 mA	4
Maximum Junction Temperature TJ(MAX)		min -40 · max 150 °C	4
Storage Temperature Range (Note 5) TSTG		min -65 · max 150 °C	4
Thermal Resistance θJA θJA	W6; High-K (Note 7)	typ 120 °C/W	4
Thermal Resistance θJC θJC	W6; High-K (Note 7)	typ 35 °C/W	4
Power Rating	W6; High-K (Note 7); TA ≤ +25°C	max 830 mW	4
Derating Factor Above TA = +25°C	W6; High-K (Note 7)	typ 8.3 mW/°C	4
Power Rating	W6; High-K (Note 7); TA = +70°C	max 450 mW	4
Power Rating	W6; High-K (Note 7); TA = +85°C	max 330 mW	4
Input Voltage VIN	TA = +25°C	min 3 · max 5.5 V	4
Continuous Output Current (-40°C ≤ TA ≤ +85°C) IOUT	-40°C ≤ TA ≤ +85°C	min 0 · max 2.1 A	4
Enable Voltage VEN, VEN	TA = +25°C	min 0 · max 5.5 V	4
High-Level Input Voltage on EN or EN VIH	Upper limit VIN; TA = +25°C	min 1.5 V	4
Low-Level Input Voltage on EN or EN VIL	TA = +25°C	min 0 · max 0.4 V	4
Current-Limit Threshold Resistor Range (1% Initial Tolerance) RLIM	TA = +25°C	min 10 · max 210 kΩ	4
Continuous FAULT Sink Current IO	TA = +25°C	min 0 · max 10 mA	4
Input De-Coupling Capacitance, IN to GND	TA = +25°C	min 0.1 uF	4
Operating Ambient Temperature TA		min -40 · max 85 °C	4
Operating Junction Temperature TJ		min -40 · max 125 °C	4
Input UVLO VUVLO	VIN Rising; TA = +25°C	typ 2.65 · max 2.95 V	5
Input UVLO Hysteresis VUVLO	VIN Decreasing; TA = +25°C	typ 65 mV	5
Input Shutdown Current ISHDN	VIN = 5.5V, Disabled, OUT = Open; TA = +25°C	typ 0.1 · max 1 uA	5
Input Quiescent Current IQ	VIN = 5.5V, Enabled, OUT = Open, RLIM = 20kΩ; TA = +25°C	typ 140 · max 160 uA	5
Input Quiescent Current IQ	VIN = 5.5V, Enabled, OUT = Open, RLIM = 210kΩ; TA = +25°C	typ 120 · max 140 uA	5
Reverse Leakage Current IREV	Disabled, VIN = 0V, VOUT = 5.5V, IREV at VIN; TA = +25°C	typ 0.01 · max 1 uA	5
Switch On-Resistance RDS(ON)	SOT26 (Type A1) Package; TJ = +25°C, VIN = 5.0V	typ 65 · max 90 mΩ	5
Switch On-Resistance RDS(ON)	SOT26 (Type A1) Package; -40°C ≤ TA ≤ +85°C	max 135 mΩ	5
Output Turn-On Rise Time tR	VIN = 5.5V, CL = 1uF, RLOAD = 100Ω. See Figure 1; TA = +25°C	typ 0.5 · max 1.5 ms	5
Output Turn-On Rise Time tR	VIN = 3.0V, CL = 1uF, RLOAD = 100Ω; TA = +25°C	typ 0.3 · max 1 ms	5
Output Turn-Off Fall Time tF	VIN = 5.5V, CL = 1uF, RLOAD = 100Ω. See Figure 1; TA = +25°C	min 0.1 · max 0.5 ms	5
Output Turn-Off Fall Time tF	VIN = 3.0V, CL = 1uF, RLOAD = 100Ω; TA = +25°C	min 0.1 · max 0.5 ms	5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMIT	RLIM = 10kΩ; TA = +25°C	min 2478 · typ 2665 · max 2852 mA	5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMIT	RLIM = 10kΩ; -40°C ≤ TA ≤ +85°C	min 2398 · typ 2665 · max 2931 mA	5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMIT	RLIM = 15kΩ; TA = +25°C	min 1614 · typ 1735 · max 1856 mA	5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMIT	RLIM = 15kΩ; -40°C ≤ TA ≤ +85°C	min 1561 · typ 1735 · max 1908 mA	5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMIT	RLIM = 20kΩ; TA = +25°C	min 1196 · typ 1286 · max 1376 mA	5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMIT	RLIM = 20kΩ; -40°C ≤ TA ≤ +85°C	min 1157 · typ 1286 · max 1414 mA	5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMIT	RLIM = 49.9kΩ; TA = +25°C	min 456 · typ 490 · max 524 mA	5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMIT	RLIM = 49.9kΩ; -40°C ≤ TA ≤ +85°C	min 441 · typ 490 · max 539 mA	5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMIT	RLIM = 210kΩ; TA = +25°C	min 95 · typ 125 · max 155 mA	5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMIT	RLIM Shorted to GND; TA = +25°C	min 40 · typ 80 · max 120 mA	5
Short-Circuit Current Limit, OUT Connected to GND ISHORT	RLIM = 10kΩ, TA = +25°C	typ 700 mA	5
Short-Circuit Current Limit, OUT Connected to GND ISHORT	RLIM = 15kΩ, TA = +25°C	typ 470 mA	5
Short-Circuit Current Limit, OUT Connected to GND ISHORT	RLIM = 20kΩ, TA = +25°C	typ 350 mA	5
Short-Circuit Current Limit, OUT Connected to GND ISHORT	RLIM = 49.9kΩ, TA = +25°C	typ 140 mA	5
Short-Circuit Current Limit, OUT Connected to GND ISHORT	RLIM = 210kΩ, TA = +25°C	typ 35 mA	5
Short-Circuit Current Limit, OUT Connected to GND ISHORT	RLIM Shorted to GND, TA = +25°C	typ 80 mA	5
EN Input Leakage Current ILEAK-EN	VIN = 5V, VEN = 0V and 5.5V; TA = +25°C	min -2 · max 2 uA	5
Turn-On Time tON	CL = 1uF, RL = 100Ω. See Figure 1; TA = +25°C	max 4 ms	5
Turn-Off Time tOFF	CL = 1uF, RL = 100Ω. See Figure 1; TA = +25°C	max 1 ms	5
Discharge Resistance (Note 9) RDIS	VIN = 5V, Disabled, IOUT = 1mA; TA = +25°C	typ 600 Ω	5
Reverse-Voltage Comparator Trip Point VRVP	VOUT - VIN; TA = +25°C	typ 65 mV	6
Reverse Current Limit IROCP	VOUT - VIN = 150mV; TA = +25°C	typ 0.32 A	6
Time from Reverse-Voltage Condition to MOSFET Turn Off tTRIG	VIN = 5V; TA = +25°C	min 2 · typ 6 · max 20 ms	6
FAULT Output Low Voltage VOL	IFAULT = 1mA; TA = +25°C	max 180 mV	6
FAULT Off Current IFOH	VFAULT = 5.5V; TA = +25°C	max 1 uA	6
FAULT Blanking Time tBLANK	Assertion or deassertion due to overcurrent and over-temperature condition; TA = +25°C	min 2 · typ 6 · max 20 ms	6
Thermal Shutdown Threshold TSHDN	Enabled	typ 145 °C	6
Thermal Shutdown Hysteresis THYS	Only for AP22652 and AP22653	typ 40 °C	6

Pins, by the datasheet

1 IN: Input; connect a 0.1uF or greater ceramic capacitor from IN to GND as close to IC as possible. · p. 2
2 GND: Ground, connect to external exposed pad. · p. 2
3 EN: Enable input, logic low turns on power switch. · p. 2
4 FAULT: Active-low open-drain output, asserted during over-current, over-temperature, or reverse-voltage conditions. · p. 2
5 ILIM: Use external resistor to set current-limit threshold; recommended 10kΩ ≦ RLIM ≦ 210kΩ. · p. 2
6 OUT: Voltage output; connect a 0.1uF bypass capacitor and a high-value capacitor to GND close to IC, at least 10uF in USB applications. · p. 2

Parameters

Control Input Logic: Active Low
Current - Supply: 140uA
Current Limit: 2.665A
Features: Overvoltage Protection
Junction Temperature(Max): 150℃
Maximum Continuous Current: 2.1A
Number of Channels: 1
Operating Temperature: -40℃~+85℃
Operating Temperature -: -40℃~+85℃
Output Current per Pin(Max): 25mA
RDS(on): 65mΩ
Rise Time: 300us
Standby Current: 100nA
Thermal Resistance(Junction to Ambient): 120℃/W
Thermal Resistance(Junction to Case): 35℃/W
Type: High Side Switch
Voltage - Supply: 3V~5.5V
Voltage - Supply(Absolute Max): 6V

Order codes

AP22652W6-7LCSC C2158038

Pinout

The pins of the AP22652W6
Pin	Name	Type
1	IN	Input
2	GND	Power in
3	EN	Input
4	FAULT	Output
5	ILIM	Output
6	OUT	Output

Open-source boards using it

All 9

4 layers36 × 77 mm
Uhub
dotcypress/uhub
uConsole USB Hub Expansion Card
50 parts67Apache-2.0
4 layers88 × 94.5 mm
FC V5a
proveskit/flight_controller_board
The main flight computer board for the PROVES Kit.
270 parts6CERN-OHL-W-2.0
4 layers88 × 94.5 mm
RT1050
NortheasternSatelliteLab/ADCS-Camera-Payload-Board

209 parts2
4 layers80 × 40 mm
Audio latency tester board
antmicro/audio-latency-tester-board
This project contains open hardware design files for an audio latency processing board. The system allows driving an external speaker and collecting audio samples from a pair of PDM or I2S microphones.
240 parts1Apache-2.0
2 layers24 × 27.9 mm
Rs485FEC
medo64/Rs485FEC
RS-485 Framework Expansion Card
25 parts1MIT
2 layers24 × 27.9 mm
Uart33FEC
medo64/Uart33FEC
UART 3.3V Framework Expansion Card
30 parts1MIT
2 layers24 × 27.9 mm
PowerFEC
medo64/PowerFEC
Non-isolated 5V output with a 500 mA current limit.
28 partsMIT
4 layers100 × 100 mm
AQUA PCB V2
samnadol/whirlpool_rov
PCB and software for Whirlpool ROV's 2024 robot
105 parts

Show this part on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/parts/diodes/AP22652W6" title="AP22652W6 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/parts/diodes/AP22652W6.jpg" alt="AP22652W6" width="1200" height="900">

A picture that opens the part, for a README

[![AP22652W6](https://pcbkit.io/embed/parts/diodes/AP22652W6.jpg?size=s)](https://pcbkit.io/parts/diodes/AP22652W6)

Questions

Is there a KiCad symbol and footprint for the AP22652W6?

Yes. The symbol is Analog & Interface:AP22652W6 and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AP22652W6?

SOT-26, with 6 pins. Its footprint is drawn on this page.

Where is the AP22652W6 datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the AP22652W6?

JLCPCB lists it as part C2158038, with 9,248 in stock; the sellers' links on this page open their listings.

What can replace the AP22652W6?

Parts like it in the library: the TPS22918DBV by Texas Instruments, the TPS2553DBV by Texas Instruments, the AP2553W6 by Diodes Incorporated and the TPS27081ADDC by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AP22652W6?

9 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

AP22652W6

Overview

Symbol

Footprint

From the datasheet

What it is and has

Around it

Specifications

Pins, by the datasheet

Parameters

Order codes

Pinout

Open-source boards using it

Uhub

FC V5a

RT1050

Audio latency tester board

Rs485FEC

Uart33FEC

PowerFEC

AQUA PCB V2

Show this part on your page

Questions

Is there a KiCad symbol and footprint for the AP22652W6?

What package is the AP22652W6?

Where is the AP22652W6 datasheet?

Where can I order the AP22652W6?

What can replace the AP22652W6?

Which open-source boards use the AP22652W6?

Parts like it

TPS22918DBV

TPS2553DBV

AP2553W6

TPS27081ADDC

AP22653W6

TPD3S014DBV

TPS2552DBV

SIP32510DT