
Lre avio daq2
IITB-Rocket-Team-Avionics/Ember
Experimental Flight Computer with potential mitigations of previous issues faced by FLYTE and a testbed for new systems.

Experimental Flight Computer with potential mitigations of previous issues faced by FLYTE and a testbed for new systems.
Lre avio daq2 is an open-source printed circuit board by IITB-Rocket-Team-Avionics, from the IITB-Rocket-Team-Avionics/Ember repository on GitHub, published under the MIT licence. It is a 4-layer board of 13.4 × 4.5 mm with 172 parts on 190 nets.
It is built around the TCAN330D, HX711 and ADS8353QPWRQ1, with the MAX31856, WS2812B-2020 and AMS1117-5.0 among its other parts. Its parts include 81 capacitors, 43 resistors, 17 ICs, 17 connectors and 5 diodes. It belongs with the STM32 boards of this library.

Ember is the SRAD flight computer system of the IITB Rocket Team, developed as an experimental platform with mitigations for issues faced by previous systems and as a testbed for new avionics architecture.
Proof of concept version validating new LoRa telemetry and core sensor suite. Features a Raspberry Pi Pico 2 dev board instead of a bare-metal hardware design. All systems validated for future versions.
| Parameter | Details |
|---|---|
| MCU | RP2350A (Pico 2 dev board) |
| Layers | 4 |
| Sensors | BMP280, BNO055, KX134 |
| GNSS | Teseo LIV3F |
| Telemetry | Waveshare Core SX1262 (920MHz LoRa) |
First full flight version. Flew successfully at IREC 2026, reaching an apogee of 9,463 ft with a SRAD N-class KNSB motor — 2% overshoot on OpenRocket predicted apogee of 9,272 ft. Split into two boards: Flight Computer Unit (FCU) and Telemetry & Data Unit (TDU).
| Parameter | Details |
|---|---|
| FCU MCU | RP2350A (Pico 2 dev board) |
| TDU MCU | RP2350A (Pico 2 dev board) |
| Layers | 2 |
| Sensors | BMP280, BNO055, KX134, NXP MPXV5100DP |
| GNSS | Quectel L89HA (multi-constellation) |
| Telemetry | Waveshare Core1262 SX1262 (920MHz LoRa) |
| Recovery | Dual deploy — drogue at apogee, main at 400m AGL |
| Pyro channels | 4 (2 primary, 2 redundant) |
| Data logging | External flash |
| COTS backup | EasyMini V2 |
Major architectural redesign with full separation of concerns across dedicated board types. Introduces triple modular redundant recovery, distributed CAN bus architecture, and significantly upgraded data acquisition.
Board types:
NTDU (Navigation, Telemetry & Data Unit) — main board. Independent sensor suite for navigation and state estimation, GNSS, LoRa telemetry, data acquisition (dp probe, strain gauges), configuration authority for all nodes on boot, aggregates and logs data from all CAN nodes.
| Parameter | Details |
|---|---|
| MCU | STM32H573 |
| Sensors | BMP384, BNO055, KX134, NXP MPXV5100DP (via ADS1220), BX350-3AA strain gauges (via ADS1220) |
| GNSS | Quectel L89HA |
| Telemetry | SX1262 920MHz LoRa |
| Data logging | OctoSPI NOR flash + microSD |
| Communication | CAN bus (all nodes) |
| Power | 2S Li-ion, AP63205WU buck (5V) |
RU (Recovery Unit) — x3 — dedicated recovery boards in triple modular redundant configuration. Distributed 2-of-3 voting via CAN bus. Each board independently detects apogee and participates in consensus voting.
| Parameter | Details |
|---|---|
| MCU | STM32F411 |
| Sensors | BMP280, single-axis accelerometer |
| Pyro channels | 2 (drogue + main) |
| Communication | CAN bus (shared with NTDU) |
| RTOS | FreeRTOS |
| Power | 1S Li-ion (isolated per board) |
| Voting | 2-of-3 mid-value select consensus |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 0.1 muF | Capacitor_SMD:C_0603_1608Metric | C11, C13, C14, C16, C17, C19, C22, C23, C24, C27, C28, C43, C44, C66, C67, C70 +1 |
| 15 | 100 | Resistor_SMD:R_0603_1608Metric | R1, R3, R4, R7, R8, R9, R10, R17, R22, R23, R24, R25, R26, R27, R35 |
| 13 | C | Capacitor_SMD:C_0603_1608Metric | C29, C30, C32, C33, C34, C35, C36, C37, C38, C39, C40, C41, C74 |
| 12 | 100 nF | Capacitor_SMD:C_0603_1608Metric | C45, C47, C50, C51, C53, C54, C55, C56, C57, C58, C61, C72 |
| 10 | 10K | Resistor_SMD:R_0603_1608Metric | R6, R11, R12, R13, R14, R15, R16, R41, R42, R43 |
| 8 | 10 muF | Capacitor_SMD:C_0603_1608Metric | C10, C12, C31, C42, C64, C65, C68, C69 |
| 6 | 0.01 muF | Capacitor_SMD:C_0603_1608Metric | C15, C18, C20, C21, C25, C26 |
| 6 | 1nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6 |
| 5 | 1 muF | Capacitor_SMD:C_0603_1608Metric | C46, C48, C49, C52, C60 |
| 5 | XT30PW-F | xt30:CONN_XT30PW-F_AMA | J12, J13, J14, J15, J16 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R36, R38, R39, R40 |
| 4 | 47 uF | Capacitor_SMD:C_0603_1608Metric | C7, C73, C75, C76 |
| 4 | 47pf | Capacitor_SMD:C_0603_1608Metric | C77, C78, C79, C80 |
| 4 | HX711 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2, U4, U13, U14 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R29, R31, R33 |
| 3 | 33k | Resistor_SMD:R_0603_1608Metric | R28, R30, R32 |
| 3 | ADS8353QPWRQ1 | ads8353:TSSOP16_PW_TEX-L | U6, U10, U11 |
| 3 | MAX31856 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U7, U8, U9 |
| 3 | SISA96DN-T1-GE3 | footprints:MOSFET_1DN-T1-GE3_VIS | Q1, Q2, Q3 |
| 3 | SMPW-CC-K-M | SMPW-CC-K-M:SMPWCCKM | J17, J18, J19 |
| 3 | WS2812B-2020 | ggg:SMT_12B-2020_WDS | U15, U16, U17 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R19, R21 |
| 2 | 150K | Resistor_SMD:R_0603_1608Metric | R18, R20 |
| 2 | 20 pF | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 4.7 muF | Capacitor_SMD:C_0603_1608Metric | C62, C63 |
| 2 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1, U5 |
| 2 | Conn_01x02_Pin | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J10, J20 |
| 2 | Conn_01x02_Socket | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J1, J4 |
| 2 | DB25_Socket_MountingHoles | Connector_Dsub:DSUB-25_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mm | J2, J24 |
| 2 | D_Schottky | Diode_SMD:D_2114_3652Metric | D1, D2 |
| 2 | ESDCAN02-2BWY | ESDCAN02-2BWY:SOT65P210X110-3N | D4, D5 |
| 2 | R | Resistor_SMD:R_0603_1608Metric | R34, R37 |
| 2 | TestPoint_Probe | TestPoint:TestPoint_Pad_D1.5mm | TP2, TP3 |
| 1 | 10 nF | Capacitor_SMD:C_0603_1608Metric | C59 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C81 |
| 1 | CMT-8530S-SMT | CMT-8530S-SMT:CUI_CMT-8530S-SMT | LS1 |
| 1 | Crystal_8Mhz | Crystal:Crystal_SMD_7050-4Pin_7.0x5.0mm | Y1 |
| 1 | DA15_Socket_MountingHoles | Connector_Dsub:DSUB-15_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mm | J23 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | RSX501LAM20TR | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | STM32F412VGTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U12 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | TCAN330 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U18 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_Amphenol_12401948E412A | J11 |
| 1 | XT60PW-M | XT60PW-M:AMASS_XT60PW-M | J3 |
| 1 | ~ | CJ3400:SOT95P240X115-3N | Q5 |

IITB-Rocket-Team-Avionics/Ember
Experimental Flight Computer with potential mitigations of previous issues faced by FLYTE and a testbed for new systems.

IITB-Rocket-Team-Avionics/Ember
Experimental Flight Computer with potential mitigations of previous issues faced by FLYTE and a testbed for new systems.

IITB-Rocket-Team-Avionics/Ember
Experimental Flight Computer with potential mitigations of previous issues faced by FLYTE and a testbed for new systems.

IITB-Rocket-Team-Avionics/Ember
Experimental Flight Computer with potential mitigations of previous issues faced by FLYTE and a testbed for new systems.

IITB-Rocket-Team-Avionics/Ember
Experimental Flight Computer with potential mitigations of previous issues faced by FLYTE and a testbed for new systems.


Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.

Arrow-air/project-caribou
Project Caribou documentation, designs, and project artifacts.


IbrahimOladepo/USB_PCIE_Board
A PCI Express x1 to USB 3.0 expansion card, designed in KiCad. Plugs into a PCIe x1 slot and breaks it out to four USB 3.0 Type-A ports.


efebasol/StepperMotorController
Rev A — single-motor bench prototype power board. Feeds the driver board (48 V), the stepper motor brake (24 V) and the logic (5 V / 3V3).

JustCuzRobotics/Just_Cuz_Logging_Current_Meter
A 150 A / 60 V inline power meter and datalogger for RC ESC test benches, a WM150-class meter with live logging, a graphing touchscreen, and thermistor plus ESC-signal channels.
It measures 13.4 × 4.5 mm and has 4 copper layers, 1.61 mm thick.
172 parts, built around the TCAN330D, HX711, ADS8353QPWRQ1 and MAX31856. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the IITB-Rocket-Team-Avionics/Ember repository on GitHub, at the commit this page was made from: the board is Ember_ECU_V0/lre_avio_daq2.kicad_pcb and its schematic Ember_ECU_V0/_restore_backup_2026-07-19T01-40-27-797/lre_avio_daq2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).