Skip to the content
12345678

TCAN330D

Texas InstrumentsExtended

-40℃~+125℃ 1Mbps 20uA 3V~3.6V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHS

Part id
ti/TCAN330D
Category
CAN Transceivers
Package
SOIC-8
Pins
8
In stock
6 at JLCPCB (C2652876)
Used on
47 open-source boards

Overview

The TCAN330D is a CAN Transceiver made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+125℃ 1Mbps 20uA 3V~3.6V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHS.

PCBKit's library has its KiCad symbol (Interface_CAN_LIN:TCAN330, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 6 are in stock at JLCPCB (part C2652876). 47 open-source boards in 31 repositories on GitHub use it.

Symbol

1TXD2GND3VCC4RXD5SHDN6CANL7CANH8S
Interface_CAN_LIN:TCAN330From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the TCAN330D
PinNameType
1TXDInput
2GNDPower in
3VCCPower in
4RXDTri-state
5SHDNInput
6CANLInput/output
7CANHInput/output
8SInput

Open-source boards using it

47See all 47
  • 4 layers83 × 100 mmSolar module-1u si, the printed circuit board in 3D

    Solar module-1u si

    oresat/oresat-solar-hardware

    OreSat solar array designs and CAD

    148 parts28
  • 4 layers99.8 × 94.6 mmOresat c3, the printed circuit board in 3D

    Oresat c3

    oresat/oresat-c3-hardware

    C3 (Command, Communication, and Control) our Command and Data Handling (C&DH) card.

    504 parts27
  • 4 layers99.8 × 94.6 mmOresat adcs card, the printed circuit board in 3D

    Oresat adcs card

    oresat/oresat-adcs-hardware

    Controller PCB for OreSat reaction wheels, magnetorquers, IMU, and magnetometers

    598 parts21GPL-2.0
  • 4 layers65 × 35 mmFlexiBMS, the printed circuit board in 3D

    FlexiBMS

    SimosMCmuffin/FlexiBMS_hardware

    Open Source BMS developed by Simo Sihvonen (Simos MCmuffin) with the Esk8 community, for the Esk8 community

    209 parts14
  • 8 layers22 × 44 mmMotar drivar, the printed circuit board in 3D

    Motar drivar

    EMakerDragon/G431_M2006_ESC

    88 parts13MIT
  • 2 layers102.7 × 56.8 mmRecoveryBoard, the printed circuit board in 3D

    RecoveryBoard

    psas/lv3.1-recovery

    design, analysis, CAD, and testing for the LV3.1 recovery system

    158 parts13
  • 4 layers73.1 × 69.8 mmStm32u595-breakout, the printed circuit board in 3D

    Stm32u595-breakout

    oresat/oresat-kicad

    All things KiCAD for OreSat; libraries, tools, settings, etc.

    85 parts6
  • 4 layers13.4 × 4.5 mmLre avio daq2, the printed circuit board in 3D

    Lre avio daq2

    IITB-Rocket-Team-Avionics/Ember

    Experimental Flight Computer with potential mitigations of previous issues faced by FLYTE and a testbed for new systems.

    172 parts4MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TCAN330D?

Yes. The symbol is Interface_CAN_LIN:TCAN330 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TCAN330D?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the TCAN330D datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TCAN330D?

JLCPCB lists it as part C2652876, with 6 in stock; the sellers' links on this page open their listings.

What can replace the TCAN330D?

Parts like it in the library: the TJA1051T/3/1J by NXP Semiconductors, the SN65HVD230D by Texas Instruments, the TJA1042T/1J by NXP Semiconductors and the CA-IF1051S by Chipanalog. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TCAN330D?

47 boards in 31 repositories on GitHub; the most starred are listed on this page, with their KiCad files.