
Picocart64 v2
khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries

Quick Hack is an open-source printed circuit board by ctayupanta, from the ctayupanta/DONGLE-ESP32-C3 repository on GitHub. It is a 2-layer board of 22 × 48.8 mm with 26 parts on 26 nets, routed with 210 tracks and 29 vias.
It is built around the ESP32-C3-WROOM-02-H4, D3V3XA4B10LP and WS2812B-2020. Its parts include 9 capacitors, 3 ICs, 3 connectors, 2 resistors and 2 diodes. It belongs with the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C3, C6, C7 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3 |
| 2 | 0.1 uF | Capacitor_SMD:C_0805_2012Metric | C2, C4 |
| 2 | 10 uF | Capacitor_SMD:C_0805_2012Metric | C1, C5 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J3 |
| 2 | SW_Push | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1, SW2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 3.3v 1A | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | Conn_01x04_Pin | Connector_USB:USB A CARD | J1 |
| 1 | D3V3XA4B10LP | Package_DFN_QFN:Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U4 |
| 1 | ESP32-C3-WROOM-02 | PCM_Espressif:ESP32-C3-WROOM-02 | U2 |
| 1 | G*** | kibuzzard-66C7F9C5 | kibuzzard-66C7F9C5 |
| 1 | G*** | kibuzzard-66CE9F7E | kibuzzard-66CE9F7E |
| 1 | LED ROJO | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1 |

khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries


aayanrahman/Star-Notifier
Star-shaped USB-C ESP32-C3 board that lights up when Claude or Cursor is done

cegea/temperature_node_hw
PCB design for a temperature sensor based on SHT and ESP32


kevinlutzer/room-environment-monitor
An IOT device built of the raspberry pi


It measures 22 × 48.8 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the ESP32-C3-WROOM-02-H4, D3V3XA4B10LP and WS2812B-2020. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ctayupanta/DONGLE-ESP32-C3 repository on GitHub, at the commit this page was made from: the board is Quick Hack.kicad_pcb and its schematic Quick Hack.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ctayupanta before reusing the design.