4 layers25.4 × 62.7 mm
2 layers
Esp32 pcb
bobbobdude/AF1_Runiom_ProjectI'm thinking that this repo can be a collection of everything we are up to with code, PCB design, 3D models and also general planning.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 64
- Pads
- 168
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 27 Oct 2026
- Updated
- 27 Oct 2026
Overview
Esp32 pcb is an open-source printed circuit board by bobbobdude, from the bobbobdude/AF1_Runiom_Project repository on GitHub. It is a 2-layer board with 26 parts on 64 nets.
It is built around the ESP32-S3-MINI-1-N8, ENS210 and D3V3XA4B10LP, with the TLV75801PDRV and WS2812B among its other parts. Its parts include 9 resistors, 8 capacitors, 4 ICs and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
5
ESP32-S3-MINI-1-N8
SMD-104.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3FN8 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi Modules
ENS210
QFN-4-EP(2x2)QFN-4-EP(2x2) Temperature and Humidity Sensor ROHSSciosenseUncategorised
D3V3XA4B10LP
UDFN2510-10-55℃~+150℃ 0.35pF 1uA 24W@8/20us 3.3V 4A@8/20us 9.4V 9V ESD Four channels IEC 61000-4-2、IEC 61000-4-5 UDFN2510-10 ESD and Surge Protection (TVS/ESD) ROHSDiodes IncorporatedESD And Surge Protection (TVS/ESD)
TLV75801PDRV
WSON-6-EP(2x2)-40℃~+125℃@(Tj) 1 31uA 500mA 50dB@(1kHz) 53uVrms 550mV~5.5V 6V Adjustable Positive Under Voltage Lockout、Over Current Protection、Soft Start、Thermal Shutdown WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdWhat this repo is about
I'm thinking that this repo can be a collection of everything we are up to with code, PCB design, 3D models and also general planning. Once we have a more substantial project we can reorganise the repo a little - but for now I'm chucking everything up there.
What's with the name?
AF1 - Alla får en
Runiom - Ruben, Nils and Tom
Cute ey?
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C5, C8 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R5, R6 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3, C6, C7 |
| 3 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R3, R9 |
| 2 | ~ | Button_Switch_SMD:SW_SPST_PTS810 | BOOT1, RESET1 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | C_Small | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | D3V3XA4B10LP | Package_DFN_QFN:Diodes_UDFN-10_1x2.5mm_P0.5mm | U2 |
| 1 | ENS210 | Package_DFN_QFN:AMS_QFN-4-1EP_2x2mm_P0.95mm_EP0.7x1.6mm | U4 |
| 1 | ESP32-S3-MINI-1-N8 | ESP32-S3-MINI-1-N8:XCVR_ESP32-S3-MINI-1-N8 | U1 |
| 1 | LED | Diode_SMD:D_0603_1608Metric | D2 |
| 1 | R_Small | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | TLV75801PDRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | JUSB1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
Similar boards
- 4 layers26.4 × 56.8 mm
ESP32 Dev module
andresmoreno2702-gif/ESP32-S3-Dev-Board-Project
All KICAD Files and Schematics
26 partsMIT - 4 layers25.8 × 63 mm
Custom ESP32 S3 Mini
ChitranshChiranjeev/Custom-ESP32-S3-Mini-PCB-using-KiCad
4-layer ESP32-S3-MINI PCB designed in KiCad with USB Type-C differential routing, LDO power regulation, temperature/humidity sensing, RGB LED, and USB protection circuitry.
26 parts - 4 layers25.5 × 62.8 mm
- 4 layers25.7 × 63 mm
- 4 layers35 × 30.1 mm
HNTemperatureMonitorPCB
lyallbeveridge/HNTemperatureMonitor
A simple, quick and dirty temperature monitor. The main goal is to get an ESP32 working with Dad's API and just report numbers all the time. I will also get experience with soldering.
34 parts - 4 layers25.4 × 62.7 mm
Esp32 pcb
satwikkamath/ESP32_with_temp_sensor_PCB_Design
This project uses an ESP32-S3-MINI-1-N8 microcontroller to interface with an ENS210 temperature and humidity sensor and a WS2812B RGB LED.
26 parts - 4 layers30.2 × 68.6 mm
Esp32
skkgokul/4-layer--PCB-Design-esp32--mini-board
ESP 32 mini is a type of microcontroller which is uesd to control the IOT devices and for various projectes
26 parts
Questions
What parts does the Esp32 pcb use?
26 parts, built around the ESP32-S3-MINI-1-N8, ENS210, D3V3XA4B10LP and TLV75801PDRV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32 pcb KiCad files?
From the bobbobdude/AF1_Runiom_Project repository on GitHub, at the commit this page was made from: the board is KiCad Project Files/esp32 pcb.kicad_pcb and its schematic KiCad Project Files/_restore_backup_2026-10-27T12-05-17-710/esp32 pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32 pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask bobbobdude before reusing the design.