2 layers99.3 × 98.6 mm
FlexiblePS
profdc9/FlexibleCharger
An Arduino-controlled charger for different kinds of batteries, or it can be a standalone power supply
118 parts13
Boards using the TIP41C
42 boardsBoards in 31 GitHub repositories, designed in KiCad, that use the TIP41C by Jiangsu Changjing Electronics Technology (CJ) (-55℃~+150℃ 1 NPN 1.5V 100V 15 2W 3MHz 400uA 5V 6A NPN TO-220-3L Bipolar (BJT) ROHS). See how each wires it, with its parts, size, README and files; the TIP41C’s symbol, footprint and pinout are on its own page.
- 2 layers135.9 × 47 mm
- 2 layers94.5 × 67.6 mm
AtmegaStepperDriver
eGuardianDev/atmegaStepperDriver
Open source stepper driver powered by atmega328p chip. First prototype designed for used in 3D printer.
102 parts2GPL-3.0 - 2 layers
- 2 layers110 × 100 mm
Lab Bench PSU
BojanSof/Lab-Bench-PSU
Laboratory bench power supply with switching preregulator and LDO.
84 parts1 - 2 layers89.2 × 62.1 mm
Dce pcb v1
DeniseViltes/dce-g5-proyecto_integrador
FIUBA - Electrónica - Taller de Diseño de Circuitos Electrónicos -Proyecto de diseño: Sistema de alimentación para aplicaciones industriales y automotrices
59 parts1 - 2 layers50 × 50 mm
PID Control Position
azzamjhd/PID-position
kendali otomatis 2 - project PID control position for an arm with propeller
29 parts - 2 layers103.5 × 65.5 mm
Tripico psu
bluesyann/tripico-psu
3-Channels Raspberry Pico-based smart power supply. Can run as standalone power supply (V or I controlled), run I-V sweeps decribed in yaml files, or run as a passive ammeter/voltmeter
41 parts - 2 layers250 × 150 mm
Power Suply
bsce26023/5-Channel-Power-Supply
This is a 5 channel Power Supply with the following voltages:
43 parts - 2 layers120 × 120 mm
- 2 layers177.8 × 107.9 mm
WaCS-52KX R1
dtatum7/WaCS-52KX
Control board upgrade for a 13.8 V 50 A linear bench power supply
113 partsMIT - 2 layers94 × 63 mm
TE2007B Amplificador BJT
ernestourrea/bjt-signal-amplifier-pcb
Amplificador analógico de señales de multiples etapas basado en transistores de unión bipolar y componentes pasivos.
31 parts - 2 layers
Tone Master
EvansCesilThomas/Tone_Controls_and_Sampling
3-in-1 (Overdrive, Distortion, Fuzz) effects for guitar (PCB is WIP) Proposed realtime audio sampling and pitch-sihting for a synthesizer functionality (WIP)
70 parts - 2 layers60 × 40 mm
Pi psu
grahamseamans/pi-psu
A 5V linear power supply designed for Raspberry Pi and similar devices.
21 parts - 2 layers295 × 150 mm
- 2 layers55.7 × 34.9 mm
- 2 layers50 × 100 mm
- 2 layers215.2 × 121.9 mm
Connectors
Mayank-Gupta11/Miniature_DC_current_controller
This is a DC current controller which can control currents in the range of 0-3A. These are the files and the report, for the course Electronic Design Lab
33 parts - 2 layers365 × 220 mm
- 2 layers92.7 × 73.7 mm
Solenoid motor uwrov
uwrov/PCB_Design
Tracd widths are quite sketch and the whole layout is a little sus but overall this should be the same design as we have on the protoboard.
8 parts - 2 layers219 × 63 mm
- 2 layers85 × 93 mm
- 2 layers250 × 195 mm
- 2 layers95 × 72 mm
