
Pi psu
A 5V linear power supply designed for Raspberry Pi and similar devices.
- Size
- 60 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 9
- Pads
- 47
- Tracks, vias
- 62, 27
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Dec 2024
- Updated
- 20 Jul 2025
Overview
Pi psu is an open-source printed circuit board by grahamseamans, from the grahamseamans/pi-psu repository on GitHub. It is a 2-layer board of 60 × 40 mm with 21 parts on 9 nets, routed with 62 tracks and 27 vias.
It is built around the RTT410, TIP41C and TIP42C, with the J113 among its other parts. Its parts include 4 capacitors, 4 resistors, 3 transistors, 3 connectors and 2 diodes. It belongs with the power boards of this library.
Main components
4RTT410
SMD-55℃~+150℃@(Tj) 1.3V@4A 100A 1kV 4A 5uA@1000V Single-Phase Rectifier SMD Bridge Rectifiers ROHSDiodes IncorporatedBridge RectifiersTIP41C
TO-220-3L-55℃~+150℃ 1 NPN 1.5V 100V 15 2W 3MHz 400uA 5V 6A NPN TO-220-3L Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)TIP42C
TO-220-3L-55℃~+150℃ 1 PNP 1.5V 100V 2W 30 3MHz 400uA 5V 6A PNP TO-220-3L Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)J113
TO-92-3LTO-92-3L JFETs ROHSonsemiJFETs
README
readme.mdTHE PINS ON BOTH TRANSISTORS ARE FLIPPED FOR BASE AND COLLECTOR. otherwise it works.
Pi PSU
A 5V linear power supply designed for Raspberry Pi and similar devices.
Overview
This project provides a stable 5V output for powering Raspberry Pi boards and other low-power electronics with out using switching supplies.
PCB Design
Below is a render of the PCB layout:

Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380 | H1, H2, H3, H4 |
| 2 | 4700uf | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C1, C2 |
| 2 | Conn_02x01 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | P1, P2 |
| 1 | 150r | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 150uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | 1k | Resistor_SMD:R_2512_6332Metric | R4 |
| 1 | 1n4007 | Diode_SMD:D_MELF | D6 |
| 1 | 220r | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 220uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | 5.6v | Diode_SMD:D_MiniMELF | D5 |
| 1 | 51r | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | Conn_01x04_Pin | Connector_Samtec_HPM_THT:Samtec_HPM-04-01-x-S_Straight_1x04_Pitch5.08mm | P3 |
| 1 | RTT410 | Samacsys:SOP500P990X180-4N | BR1 |
| 1 | TIP41C | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q4 |
| 1 | TIP42C | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q3 |
| 1 | j113 | Package_TO_SOT_SMD:SOT-23 | Q1 |
Similar boards
- 2 layers135.9 × 47 mm

- 2 layers94.5 × 67.6 mm

AtmegaStepperDriver
eGuardianDev/atmegaStepperDriver
Open source stepper driver powered by atmega328p chip. First prototype designed for used in 3D printer.
102 parts2GPL-3.0 - 2 layers

- 2 layers89.2 × 62.1 mm

Dce pcb v1
DeniseViltes/dce-g5-proyecto_integrador
FIUBA - Electrónica - Taller de Diseño de Circuitos Electrónicos -Proyecto de diseño: Sistema de alimentación para aplicaciones industriales y automotrices
59 parts1 - 2 layers103.5 × 65.5 mm

Tripico psu
bluesyann/tripico-psu
3-Channels Raspberry Pico-based smart power supply. Can run as standalone power supply (V or I controlled), run I-V sweeps decribed in yaml files, or run as a passive ammeter/voltmeter
41 parts - 2 layers120 × 120 mm

- 2 layers

Tone Master
EvansCesilThomas/Tone_Controls_and_Sampling
3-in-1 (Overdrive, Distortion, Fuzz) effects for guitar (PCB is WIP) Proposed realtime audio sampling and pitch-sihting for a synthesizer functionality (WIP)
70 parts - 2 layers365 × 220 mm

Questions
How big is the Pi psu PCB?
It measures 60 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pi psu use?
21 parts, built around the RTT410, TIP41C, TIP42C and J113. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pi psu KiCad files?
From the grahamseamans/pi-psu repository on GitHub, at the commit this page was made from: the board is pi-psu.kicad_pcb and its schematic pi-psu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pi psu design in my own project?
Its repository states no licence, so its author keeps all rights: ask grahamseamans before reusing the design.