

AmplificatorAudioPCB
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 53
- Pads
- 130
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Mar 2025
- Updated
- 8 Mar 2026
Overview
AmplificatorAudioPCB is an open-source printed circuit board by allbeertoo, from the allbeertoo/Amplificator-Audio repository on GitHub. It is a 2-layer board with 35 parts on 53 nets.
It is built around the OPA2604AP, TIP41C and TIP42C. Its parts include 17 resistors, 4 ICs, 4 diodes, 4 transistors and 2 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3OPA2604AP
DIP-8-24V~-4.5V、4.5V~24V -40℃~+85℃ 1 10.5mA 100dB 11nV/√Hz@1kHz 1mV 20MHz 25V/us 3pA 50pA 8uV/℃ Built-in compensation DIP-8 FET Input Amplifiers ROHSTexas InstrumentsFET Input AmplifiersTIP41C
TO-220-3L-55℃~+150℃ 1 NPN 1.5V 100V 15 2W 3MHz 400uA 5V 6A NPN TO-220-3L Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)TIP42C
TO-220-3L-55℃~+150℃ 1 PNP 1.5V 100V 2W 30 3MHz 400uA 5V 6A PNP TO-220-3L Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdAlberto
PCB(KICAD)
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4 |
| 4 | OPA2604AP | Package_DIP:DIP-8_W7.62mm | U1, U2, U3, U4 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R7, R10 |
| 3 | TIP41C | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3 |
| 2 | 10n | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | R13, R14 |
| 1 | '10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | R17 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R16 |
| 1 | 12.41k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R8 |
| 1 | 15.4k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R11 |
| 1 | 2.05k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R6 |
| 1 | 2.26k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 1 | 2.74k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2 |
| 1 | 5 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R15 |
| 1 | 50k | Potentiometer_THT:Potentiometer_Bourns_3296Z_Horizontal | RV1 |
| 1 | 590 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | R12 |
| 1 | 61.9k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5 |
| 1 | 88.6k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9 |
| 1 | 90.9k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | TIP42C | Package_TO_SOT_THT:TO-220-3_Vertical | Q4 |
More from allbeertoo/Amplificator-Audio
1- 2 layers54.5 × 16.2 mm

Similar boards
- 2 layers135.9 × 47 mm

- 2 layers94.5 × 67.6 mm

AtmegaStepperDriver
eGuardianDev/atmegaStepperDriver
Open source stepper driver powered by atmega328p chip. First prototype designed for used in 3D printer.
102 parts2GPL-3.0 - 2 layers89.2 × 62.1 mm

Dce pcb v1
DeniseViltes/dce-g5-proyecto_integrador
FIUBA - Electrónica - Taller de Diseño de Circuitos Electrónicos -Proyecto de diseño: Sistema de alimentación para aplicaciones industriales y automotrices
59 parts1 - 2 layers103.5 × 65.5 mm

Tripico psu
bluesyann/tripico-psu
3-Channels Raspberry Pico-based smart power supply. Can run as standalone power supply (V or I controlled), run I-V sweeps decribed in yaml files, or run as a passive ammeter/voltmeter
41 parts - 2 layers120 × 120 mm

- 2 layers

Tone Master
EvansCesilThomas/Tone_Controls_and_Sampling
3-in-1 (Overdrive, Distortion, Fuzz) effects for guitar (PCB is WIP) Proposed realtime audio sampling and pitch-sihting for a synthesizer functionality (WIP)
70 parts - 2 layers60 × 40 mm

Pi psu
grahamseamans/pi-psu
A 5V linear power supply designed for Raspberry Pi and similar devices.
21 parts - 2 layers365 × 220 mm

Questions
What parts does the AmplificatorAudioPCB use?
35 parts, built around the OPA2604AP, TIP41C and TIP42C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AmplificatorAudioPCB KiCad files?
From the allbeertoo/Amplificator-Audio repository on GitHub, at the commit this page was made from: the board is AmplificatorAudioPCB.kicad_pcb and its schematic proiectPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AmplificatorAudioPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask allbeertoo before reusing the design.