Skip to the content

STM32

736 boards

KiCad boards from 367 GitHub repositories tagged “stm32”, the most starred first; open any of them in PCBKit.

  • 4 layers57 × 33 mmSensor pcb, the printed circuit board in 3D

    Sensor pcb

    nichlock/open-linear-scale

    Open-source capacitive linear encoder / DIY DRO scale: KiCad PCBs, STM32 firmware, and test data. Same principle as digital calipers.

    69 parts73
  • 2 layers29.8 × 33.7 mmPecanpico9, the printed circuit board in 3D

    Pecanpico9

    DL7AD/pecanpico9

    A lightweight APRS tracker for balloons

    116 parts68GPL-3.0
  • 2 layers64 × 67 mmMidi, the printed circuit board in 3D

    Midi

    keshikan/CureMIDI

    USB-MIDI Interface(2IN/2OUT) for STM32

    182 parts65
  • 4 layers48.8 × 53.1 mmESC Board, the printed circuit board in 3D

    ESC Board

    FPV-Drone-STM32F411/DroneController

    All-in-one FPV drone PCB with integrated flight controller, PDB, and ESCs built around STM32F411.

    73 parts60
  • 2 layers99.1 × 109.2 mmModule, the printed circuit board in 3D

    Module

    zlosynth/kaseta

    Saturating tape delay and feedback sculptor.

    71 parts59CC-BY-SA-4.0
  • 2 layers70 × 45 mmCrowbar glitcher, the printed circuit board in 3D

    Crowbar glitcher

    joegrand/stm32-fault-injection

    STM32F2 / F4 Fault Injection

    44 parts55
  • 4 layers199.9 × 69.3 mmZaphod controller, the printed circuit board in 3D

    Zaphod controller

    Scottapotamas/zaphod-bot

    A DIY high performance delta-bot for fun, and lightpainting...

    251 parts53
  • 2 layers115.3 × 48.1 mmSadcatz40, the printed circuit board in 3D

    Sadcatz40

    ChrisChrisLoLo/pusheenz40

    A pocket keyboard that uses SMD mouse switches. Low profile and easy to assemble

    107 parts49GPL-3.0
  • 4 layers101.6 × 53.3 mmH730duino, the printed circuit board in 3D

    H730duino

    martinribelotta/h730duino

    STM32H7 Arduino form factor and software compatible board

    111 parts47MIT
  • 2 layers17 × 15.7 mmMP Power, the printed circuit board in 3D

    MP Power

    ghent360/PrntrBoardV2

    32-bit 3D Printer controller board using STM32F407 and replaceable TMC2660/2209 stepper drivers.

    12 parts45
  • 2 layers48 × 19 mmUsb floppy adapter, the printed circuit board in 3D

    Usb floppy adapter

    roybaer/usb_floppy_adapter

    STM32-based USB to Floppy-Disk Drive (FDD) Adapter

    28 parts45
  • 2 layers51 × 23.1 mmFeather rak3172, the printed circuit board in 3D

    Feather rak3172

    teapotlaboratories/feather-rak3172

    Teapotlabs Feather RAK3172: Low-cost Low-power LoRaWAN Development Board

    53 parts43MIT
  • 2 layers85 × 50 mmAPPMC, the printed circuit board in 3D

    APPMC

    tdjastrzebski/All-Purpose-Power-Micro-Controller

    General purpose power controller, capable of driving soldering irons using different voltages and probe types.

    117 parts40
  • 2 layers48.4 × 106.3 mmAchordion, the printed circuit board in 3D

    Achordion

    zlosynth/achordion

    Chord-crafting quantizing wavetable oscillator.

    55 parts38CC-BY-SA-4.0
  • 4 layers27 × 27 mmO32controller, the printed circuit board in 3D

    O32controller

    qwertpas/O32controller

    Miniature closed-loop controller for brushless DC motors

    126 parts37MIT
  • 2 layers36.8 × 90.9 mmBwlr1e, the printed circuit board in 3D

    Bwlr1e

    teapotlaboratories/bwlr1e

    Teapotlabs BWLR1E: Wireless Environmental Sensor with Energy Harvesting from Solar Energy

    65 parts36MIT
  • 2 layers97.7 × 58 mmBluepill function generator, the printed circuit board in 3D

    Bluepill function generator

    BojanSof/BluePillWaveGen

    DDS function generator build around STM32 BluePill board

    41 parts35
  • 2 layersEnlightened Otter, the printed circuit board in 3D

    Enlightened Otter

    Jana-Marie/Enlightened-Otter

    Enlighted-Otter is an Open-Source and OSHW work-light for hacker/maker events like the chaos communication congress, which can be screwed onto a club mate bottle.

    182 parts35GPL-3.0
  • 4 layers307 × 46.1 mmStm32pe midi, the printed circuit board in 3D

    Stm32pe midi

    udu3324/stm32pe-midi

    a midi controller using the mpe protocol to create more expressive music

    136 parts35GPL-3.0
  • 2 layers128 × 47 mmStm32f1-nrf24l01-transmitter pcb, the printed circuit board in 3D

    Stm32f1-nrf24l01-transmitter pcb

    laneboysrc/rc-headless-transmitter

    DIY 2.4 GHz RC transmitter without display, configurable through smartphone or web browser

    79 parts33
  • 2 layers89.6 × 79 mmTDR 5351 core, the printed circuit board in 3D

    TDR 5351 core

    MR-DOS/TDR_diploma_thesis

    Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.

    199 parts33GPL-3.0
  • 2 layersAnt7 t st25dv04k, the printed circuit board in 3D

    Ant7 t st25dv04k

    araobp/stm32-mcu

    Application components for STMicro STM32 MCUs

    15 parts29
  • 2 layers70 × 20.1 mmSPD DC MotorHBridge, the printed circuit board in 3D

    SPD DC MotorHBridge

    Jarins/Solder-Paste-Dispenser-with-DCMotor

    Motorized solder paste dispenser

    48 parts29GPL-3.0
  • 2 layers19.1 × 29.1 mmPlacebo, the printed circuit board in 3D

    Placebo

    dotcypress/placebo

    Truly minimal STM32G0/STM32C0 prototyping board

    18 parts27Apache-2.0