
Rgb led board
Scottapotamas/zaphod-bot
A DIY high performance delta-bot for fun, and lightpainting...

A DIY high performance delta-bot for fun, and lightpainting...
Zaphod controller is an open-source printed circuit board by Scottapotamas, from the Scottapotamas/zaphod-bot repository on GitHub. It is a 4-layer board of 199.9 × 69.3 mm with 251 parts on 215 nets, routed with 2,078 tracks and 388 vias.
It is built around the ABS06-107-32.768KHZ, ACS711KEXLT-15AB-T and ISL85410FRZ, with the ULN2003A, ADUM3160BRW and LM5116MH among its other parts. Its parts include 80 capacitors, 69 resistors, 24 diodes, 11 ICs and 10 connectors. It belongs with the robots and motor control boards and the STM32 boards of this library.

ZaphodBot is a DIY, 'high-end' rotary delta robot designed primarily for high-fidelity light painting.
It's served as a personal project where the majority of mechanics, electronics, firmware and higher level software has been designed from scratch (because why not).
I've detailed the design motivation and build in a more longform post here.

CAD files for the robot are in Solidworks 2015 format, and can be found in /mechanical/design/.
The power supply and main electronics stacks live inside the hexagonal structure which forms the base, with servos mounted on top, connected directly to the arms.
To manufacture parts, see /mechanical/design/manf_outputs/ for drawings, STEP/DXF files. SLA 3D printing was used for joints, and CNC machining for the aluminium parts and carbon plates.
All fasteners are standard metric hex bolts, with the exception of some bottom mounting holes which are 1/4in and 3/8in threaded holes to suit typical camera tripods.
The PCB was designed using KiCAD 5, located in electronics/zaphod-controller. Gerber outputs are available with BoM, but minor design revisions are needed to improve wire-loom layout and debug/expansion connector positions.

It's based on a STM32F4 processor, provides regulated 3/5/12V from the 75V system supply, and manages the servos, internal IO and external IO.
/electronics/zaphod-controller/Outputs/zaphod-controller-sch.pdf for pinouts./docs/connectors_pinouts.md./docs/connectors_pinouts.md.
Microcontroller firmware (STM32) is in /firmware, is written in C, and can be built with a fairly standard arm-gcc-eabi-none toolchain.
I've used (and included config for) CLion as my main IDE, which is CMake based, though building with SW4/Eclipse shouldn't be too hard either.
Flashing the microcontroller is pretty standard as well, a 10-pin ARM CORTEX SWD socket is on the PCB, which connects to a STLink, Blackmagic Probe, or JLink programmer (used all three at various stages of this project).
The user interface is built with Electric UI, and can be built and run by invoking arc start from /interface.
It facilitates control and monitoring of the hardware, along with toolpath generation, optimisation and visualisation pipelines.

Toolpaths for lightpainting are created by exporting spline data from Blender using a Python script, and loading the output with the "Blender" tab in the UI.
The frontend UI is responsible for parsing the Blender scene and performing a series of move planning and TSP optimisation steps to reduce render times.
https://user-images.githubusercontent.com/460325/182141536-1118c95f-b80b-4199-9833-aa961b41ea9a.mp4
This screencap shows a Blender animation being loaded: the 'fast' plan completes within a second, then the multi-threaded TSP solver iterates on each frame to refine the path taken to render the particles.

The light-painting 'brush' uses acrylic 1mm core fibre, connected to a 3x3W RGB LED.
The fibre is mounted to the effector with a turned acetal stalk (not documented), or with one of the SLA printed mounts found in /mechanical/fibre-couplers/.
The driver PCB is in /electronics/rgb-led-board/ along with manufacturing files and a simple Arduino test program. This board connects to zaphod-controller via the 8-pin NanoFit connector, which provides PWM+IO and power.


The 9-pin LEMO connector is used with a 2m cable, connecting to the breakout box via matching 9-pin LEMO. A Novelkeys Big Switch is used as an E-STOP, with the keyswitch light indicating motor state.
A 2.5mm stereo socket mounted in the box provides support for camera shutter release cable, in this case for a Canon N3 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | 100n_X7R_1608M | Applidyne_Capacitor:CAPC1608X90N | C1, C4, C16, C22, C24, C37, C38, C39, C40, C41, C42, C43, C44, C46, C47, C50 +15 |
| 15 | BAV99 | Applidyne_SOT:SOT95P240X110-3L16N | D1, D6, D7, D8, D9, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 |
| 11 | 10K0_1608M | Applidyne_Resistor:RESC1608X50N | R3, R23, R36, R37, R38, R39, R55, R56, R61, R63, R70 |
| 9 | 1n_X7R_1608M | Applidyne_Capacitor:CAPC1608X90N | C60, C61, C62, C63, C64, C66, C67, C68, C69 |
| 7 | 100R_1608M | Applidyne_Resistor:RESC1608X50N | R32, R40, R41, R42, R43, R50, R51 |
| 7 | 1u_X7R_1608M | Applidyne_Capacitor:CAPC1608X90N | C11, C12, C26, C34, C35, C36, C45 |
| 6 | 100K_1608M | Applidyne_Resistor:RESC1608X50N | R5, R8, R9, R19, R25, R28 |
| 6 | 22u_X7R_3225M | Applidyne_Capacitor:CAPC3225X170N | C15, C17, C31, C32, C33, C72 |
| 5 | 10R_1608M | Applidyne_Resistor:RESC1608X50N | R49, R52, R53, R54, R62 |
| 5 | 22K_1608M | Applidyne_Resistor:RESC1608X50N | R10, R44, R45, R46, R47 |
| 4 | 10n_X7R_1608M | Applidyne_Capacitor:CAPC1608X90N | C56, C57, C58, C59 |
| 4 | 10u_X7R_3225M | Applidyne_Capacitor:CAPC3225X170N | C3, C21, C75, C80 |
| 4 | 22R_1608M | Applidyne_Resistor:RESC1608X50N | R30, R31, R67, R68 |
| 4 | 22p_X7R_1608M | Applidyne_Capacitor:CAPC1608X90N | C14, C29, C48, C49 |
| 4 | 2u2_X7R_4532M | Applidyne_Capacitor:CAPC4532X180N | C5, C6, C8, C9 |
| 4 | 3V3 | Applidyne_SOD:SOD3715X145N | D10, D11, D12, D13 |
| 4 | 47u_TANT_7343M | Applidyne_Capacitor:CAPPM7343X310N | C25, C27, C28, C30 |
| 4 | 4K7_1608M | Applidyne_Resistor:RESC1608X50N | R33, R34, R65, R66 |
| 4 | ACS711KEXLT_15AB | Applidyne_QFN:ACS-EX-12 | U6, U7, U8, U9 |
| 4 | FIDUCIAL | Applidyne_Fiducial:FID100X200 | FID1, FID2, FID3, FID4 |
| 4 | LOGO | Applidyne_Logo:WARN_TRIANGLE_LOGO440X400 | LOGO6, LOGO7, LOGO8, LOGO9 |
| 4 | MOLEX_MINIFIT_JR_2x2_WAY | Applidyne_Connector_Molex:Molex_Mini-Fit_Jr_5566-04A_2x02_P4.20mm_Vertical | P2, P3, P4, P5 |
| 4 | MOLEX_MINIFIT_JR_2x4_WAY | Applidyne_Connector_Molex:Molex_Mini-Fit_Jr_5566-08A_2x04_P4.20mm_Vertical | P11, P12, P13, P14 |
| 3 | 0R_1608M | Applidyne_Resistor:RESC1608X50N | R20, R21, R22 |
| 3 | 1K_QUAD_ARRAY_1608M | Applidyne_Resistor:R_Array_Concave_4x1608M | R29, R35, R57 |
| 3 | 1u_X7R_2012M | Applidyne_Capacitor:CAPC2012X110N | C19, C20, C23 |
| 3 | 2K40_1608M | Applidyne_Resistor:RESC1608X50N | R4, R58, R59 |
| 3 | B3U-1000P_SPST-NO_SMD | Applidyne_Switch:B3U-1000P | SW1, SW2, SW3 |
| 3 | MNT_M3_PLATED | Applidyne_Mount:MTGP650H330 | MNT1, MNT2, MNT3 |
| 2 | 0.5A_1210L_PTC | Applidyne_Fuse:FUSC3225X85L50N | F1, F2 |
| 2 | 12K7_1608M | Applidyne_Resistor:RESC1608X50N | R7, R27 |
| 2 | 130K_1608M | Applidyne_Resistor:RESC1608X50N | R1, R2 |
| 2 | 1K_1608M | Applidyne_Inductor:INDC1608X95N | FB1, FB2 |
| 2 | 200V_350mW_SOT23 | Applidyne_SOT:SOT95P240X110-3L16N | D2, D3 |
| 2 | 22u_MCSDRH73B | Applidyne_Inductor:INDM7373X355L170X207N | L1, L2 |
| 2 | 2N7002P | Applidyne_SOT:SOT95P240X110-3L16N | Q3, Q6 |
| 2 | ISL85410FRZ | Applidyne_QFN:QFN50P400X300X100-13T170X330N | U1, U3 |
| 2 | NTC_10K_1608M | Applidyne_Resistor:RESC1608X50N | TH1, TH2 |
| 2 | PROBE_PAD | Applidyne_Test:TP200 | TEST6, TEST8 |
| 2 | Si7852DP | Applidyne_SON:SON127P490X575X90-9T313X381N | Q1, Q2 |
| 2 | ULN2003A | Applidyne_SOIC:SOIC127P1030X265-18L87N | U10, U11 |
| 1 | 102K_1608M | Applidyne_Resistor:RESC1608X50N | R11 |
| 1 | 10K7_1608M | Applidyne_Resistor:RESC1608X50N | R15 |
| 1 | 10u2_PA2050 | Applidyne_Inductor:PULSE_PA2050 | L3 |
| 1 | 15p_X7R_1608M | Applidyne_Capacitor:CAPC1608X90N | C10 |
| 1 | 16K9_1608M | Applidyne_Resistor:RESC1608X50N | R69 |
| 1 | 1K00_1608M | Applidyne_Resistor:RESC1608X50N | R60 |
| 1 | 1K2_1608M | Applidyne_Resistor:RESC1608X50N | R14 |
| 1 | 1M_1608M | Applidyne_Resistor:RESC1608X50N | R6 |
| 1 | 1R0_1608M | Applidyne_Resistor:RESC1608X50N | R18 |
| 1 | 1n5_X7R_1608M | Applidyne_Capacitor:CAPC1608X90N | C13 |
| 1 | 2R2_1608M | Applidyne_Resistor:RESC1608X50N | R17 |
| 1 | 330p_X7R_1608M | Applidyne_Capacitor:CAPC1608X90N | C18 |
| 1 | 33K2_1608M | Applidyne_Resistor:RESC1608X50N | R64 |
| 1 | 39K_1608M | Applidyne_Resistor:RESC1608X50N | R13 |
| 1 | 47R_QUAD_ARRAY_1608M | Applidyne_Resistor:R_Array_Concave_4x1608M | R48 |
| 1 | 47u_ELEC_100V_1350X1350M | Applidyne_Capacitor:CAPAE1350X1350D1490DD450L470N | C2 |
| 1 | 750K_1608M | Applidyne_Resistor:RESC1608X50N | R16 |
| 1 | 91K_1608M | Applidyne_Resistor:RESC1608X50N | R26 |
| 1 | 9K53_1608M | Applidyne_Resistor:RESC1608X50N | R12 |
| 1 | ABS06-107-32.768KHZ | Applidyne_Crystal:XTALDFN200X120X60-2N | X3 |
| 1 | ADUM3160 | Applidyne_SOIC:SOIC127P1032X265-16L87N | U5 |
| 1 | ADUM5412 | Applidyne_SOP:SOP65P780X200-24L40N | U12 |
| 1 | BC847B | Applidyne_SOT:SOT95P240X110-3L16N | Q5 |
| 1 | CLIP_HOOK_BLACK | Applidyne_Test:KEYSTONE_5001 | TEST5 |
| 1 | CLIP_HOOK_BROWN | Applidyne_Test:KEYSTONE_5115 | TEST1 |
| 1 | CLIP_HOOK_ORANGE | Applidyne_Test:KEYSTONE_5003 | TEST4 |
| 1 | CLIP_HOOK_RED | Applidyne_Test:KEYSTONE_5000 | TEST3 |
| 1 | CLIP_HOOK_YELLOW | Applidyne_Test:KEYSTONE_5004 | TEST2 |
| 1 | CONN_01X02 | Applidyne_Connector_Wurth:61300211121 | P18 |
| 1 | CONN_01X06 | Applidyne_Connector_Wurth:61300611121 | P20 |
| 1 | CSTCE8M00G55Z | Applidyne_Crystal:OSCSC-CSCTE-CERALOCK | X1 |
| 1 | LED_GREEN_1608M | Applidyne_LED:LEDC1608X80L40N | D5 |
| 1 | LED_RED_1608M | Applidyne_LED:LEDC1608X80L40N | D24 |
| 1 | LED_YELLOW_1608M | Applidyne_LED:LEDC1608X80L40N | D4 |
| 1 | LM5116 | Applidyne_SOP:SOP21P65_720X780X200L75X30N | U2 |
| 1 | LOGO | Applidyne_Logo:FIRE_LOGO_320X420 | LOGO11 |
| 1 | LOGO | Applidyne_Logo:BOLT_LOGO_310X490 | LOGO12 |
| 1 | LOGO | Applidyne_Logo:WARN_TRIANGLE_LOGO440X400_MASK | LOGO10 |
| 1 | LOGO | Applidyne_Logo:BUG_LOGO250X250 | LOGO2 |
The 235 most common of 251 parts.

Scottapotamas/zaphod-bot
A DIY high performance delta-bot for fun, and lightpainting...

ArnaudSchlumberger/MainBotPCB
This project is part of Robot Télécom Strasbourg's work as part of our participation to the French Robot Cup.



xiaokaizip/lm5116-digital-power
c #define MCP41100ENABLE 0B00010011 #define MCP41100DISABLE 0B00100000


Scottapotamas/spe-marine-node
Prototype project to build an underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L + 802.3cg)

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

It measures 199.9 × 69.3 mm and has 4 copper layers, 1.6 mm thick.
251 parts, built around the ABS06-107-32.768KHZ, ACS711KEXLT-15AB-T, ISL85410FRZ and ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Scottapotamas/zaphod-bot repository on GitHub, at the commit this page was made from: the board is electronics/zaphod-controller/zaphod-controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Scottapotamas before reusing the design.