

Ant7 t st25dv04k
Application components for STMicro STM32 MCUs
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 37
- Pads
- 59
- Tracks, vias
- 51, 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Apr 2018
- Updated
- 9 Jun 2019
Overview
Ant7 t st25dv04k is an open-source printed circuit board by araobp, from the araobp/stm32-mcu repository on GitHub. It is a 2-layer board with 15 parts on 37 nets, routed with 51 tracks and 6 vias.
Its parts include 6 resistors, 5 connectors, 3 diodes and 1 IC. It belongs with the audio and music boards and the STM32 boards of this library.
README
README.mdApplication components for STMicro STM32 MCUs
Toolchain: Migrating from TrueSTUDIO+CubeMX to STM32CubeIDE
Common libraries
NUCLEO-F401RE board
- DCT Type-II implementation on CMSIS-DSP (also works on L4) including a zigzag scan utility function.
Application components
NUCLEO-F401RE board
- Thermography (infrared array sensor) and rock-paper-scissors recogniton with Keras/TensorFlow
- X-CUBE-AI (ML inference on MCU with 2D images from an infrared array sensor)
- X-CUBE-BLE1 (BLE)
NUCLEO-L476RG board
- HelloWorld
- GPIO_Interrupt
- Clock
- CAN
- MEMSMIC(MEMS mic expansion board)
- ADC with DMA
- DAC with triangular wave and sine wave
- Mic->ADC->DAC pipeline
- Sound Effector
- Chirp compression
NUCLEO-F401RE and NUCLEO-L476RG boards
Dynamic NFC tags
STM32F4 Discovery board
printf issue
I managed to support printf on USART2.
Physical configuration:
STM32F407
+------------+
X 5V |
GND ----- GND FTDI |
PA3(RX) ----- TX USB-UART ===== USB ======> PC
PA2(TX) ----- RX converter |
+------------+Include the following snippet in main.c to support printf:
int _write(int file, char *pbuf, int len)
{
HAL_UART_Transmit(&huart2, (uint8_t *)pbuf, len, 1000);
return len;
}PWM test
PWM output (100Hz, 50% duty) to PA8:

Tips
- CMSIS DSP RFFT pitfalls
- Enabling DSP on STM32
- PCM data resolution on STM32L4 DFSDM
- Enabling printf on STM32
References
STM32L476 Nucleo-64
STM32F4 Discovery board
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | mcu:Register | R1, R2, R6 |
| 3 | 51k | mcu:Register | R3, R4, R5 |
| 2 | Conn_01x08_Male | mcu:Pin Header 8P | J1, J5 |
| 1 | Conn_01x05_Male | mcu:Pin_Header_5P | J3 |
| 1 | Conn_01x06_Male | mcu:Pin Header 6P | J2 |
| 1 | Conn_01x10_Male | mcu:Pin Header 10P | J4 |
| 1 | LED BLUE | mcu:LED | D2 |
| 1 | LED GREEN | mcu:LED | D1 |
| 1 | LED RED | mcu:LED | D3 |
| 1 | tactile_sw | mcu:tactile_sw_4p | U1 |
More from araobp/stm32-mcu
1- 2 layers

Similar boards
- 2 layers19 × 76 mm

Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
15 parts3kApache-2.0 - 2 layers26.7 × 62.2 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
15 parts1kGPL-3.0 - 2 layers100 × 44 mm

Videoslot
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
15 parts1k - 2 layers91 × 51 mm

BusinessCard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
15 parts915 - 2 layers24.3 × 57.9 mm

Flosspods pro flex
kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.
15 parts609WTFPL - 2 layers20.3 × 15.2 mm

L0 Load
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
15 parts546MIT - 2 layers68 × 50 mm

EleLab v2 PowerFeed
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
15 parts531GPL-3.0 - 2 layers50.8 × 35.6 mm

Questions
What parts does the Ant7 t st25dv04k use?
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ant7 t st25dv04k KiCad files?
From the araobp/stm32-mcu repository on GitHub, at the commit this page was made from: the board is NUCLEO-F401RE/NFC/kicad/ant7_t_st25dv04k.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ant7 t st25dv04k design in my own project?
Its repository states no licence, so its author keeps all rights: ask araobp before reusing the design.