
STM32
736 boardsKiCad boards from 367 GitHub repositories tagged “stm32”, the most starred first; open any of them in PCBKit.
- 4 layers41.7 × 16.6 mm

- 2 layers90 × 70 mm

STM32 Industrial Edge Gateway v0.2.0
An4s0/STM32-Industrial-Edge-Gateway
Embedded industrial edge gateway for environmental monitoring. Features Modbus RTU over RS485, real-time US EPA AQI computation, FatFs microSD CSV logging, and an embedded lwIP Ethernet web dashboard.
90 parts - 4 layers61.6 × 95.8 mm

In car dashboard
andreiii04/in-car-dashboard
Custom STM32 in-car telemetry display: G-meter, GPS speed and cabin weather on a 2.8" TFT, with each drive logged to SD.
51 partsMIT - 2 layers39.7 × 24.5 mm

Stm32
Annusingh002/custom-stm32-pcb
Custom STM32 development board designed in KiCad with complete schematic, PCB layout, and Gerber files.
28 parts - 2 layers

- 4 layers117 × 77 mm

ProdDeck
arsovskiteodor/A.ProdDeck
Open-hardware macro pad (WIP): custom KiCad PCB with keys, encoders and a fader, plus firmware and a desktop configurator
69 parts - 2 layers41 × 31 mm

STM32 1st Project
ashfaque-ur-rahman/STM32-1st-Demo-PCB-Design
STM32 microcontroller PCB design — KiCad project based on Phil's Lab tutorial series
32 parts - 2 layers70 × 57.5 mm

Final schmatic
atiq-mufaqqir/TinyML-Environmental-Hazard-Monitor
TinyML-based indoor environmental monitoring system using STM32, multi-sensor fusion, and Edge Impulse for real-time embedded classification of cooking, aerosol, and normal indoor conditions.
8 parts - 2 layers100 × 73.3 mm

Pride Badge
aziraphale/pride-badge-v1
🌈⚡Pride badge PCB with LEDs, STM32, and 3D printed diffuser+case!
136 parts - 4 layers99.5 × 92.3 mm

Brain board
Batterhead221/brain_board
Custom STM32H753 brain board with USB-C power/input selection, 3.3V buck regulation, microSD, CAN, RS-485, FRAM, flash, debug/programming access, and expansion connectors.
131 partsMIT - 2 layers66.7 × 81 mm

- 2 layers92.3 × 54.5 mm

Industrial STM32-CAN Node
bgmbzk/Industrial-STM32-CAN-Node
Industrial-grade CAN-Bus Node design based on STM32F103. Features SMD components, high-reliability routing, and production-ready Gerber files.
13 parts - 4 layers76 × 74.3 mm

MCU PSU
Blaze-Pascal/EKA-PiF-MCU_PSU
2-phase synchronous digitally controlled buck converter (30V in, up to 10A out). Features a 4-layer custom KiCad PCB optimized for EMI.
119 partsGPL-3.0 - 4 layers165.3 × 123.7 mm

RX8-7(WithoutOpAmps)
bradport02/RX8-Infotainment_System
An infotainment system for the Mazda RX-8 that integrates seamlessly with the climate control unit.
392 parts - 2 layers49.8 × 54.9 mm

Reflow toaster mainboard
canardos/bake-n-flow
Hardware and firmware files for an STM32 based toaster reflow oven
46 partsMIT - 2 layers54 × 82 mm

Bt audio rec
canardos/bluetooth-wall-player
Firmware and hardware design for a wall-mounted Bluetooth audio player and environmental monitor
63 partsMIT - 6 layers497.4 × 154.7 mm

FCSTMV1.05
CGainsWorks/emb-drone-flight-stack
Open-source quadrotor flight stack: custom KiCad flight-controller and power distribution boards plus C++ firmware with a PID attitude loop, written from scratch.
1,198 partsMIT - 2 layers102 × 84 mm

RelayCard
chapppy/Board-for-Relay-Card
Design of schematic and PCB for Relay Card control over USB and CAN based on STM32
81 partsGPL-3.0 - 2 layers20 × 38.5 mm

Arm tiny pcb
Chicken-Fried/STM32-NanoCortex
Ultra-compact USB-C development board powered by STM32F042 (ARM Cortex-M0) with native DFU, ceramic-only LDO power stage & CaveRover branding.
29 partsCERN-OHL-S-2.0 - 2 layers

Pcbgolf
chilly23/PCBGolf-master-Comma.ai
Compact PCB studies for the comma.ai PCBGolf challenge, including KiCad and EasyEDA designs, BOMs, STEP models, and routing-status reports.
245 partsMIT - 4 layers75 × 49 mm

Kamikazii
choicebuilds/SumoBot-v2
A Robojackets robot (v2) built from scratch, featuring a custom 4-layer PCB, STM32-based (ARM Cortex-M3) firmware written in C (STM32CubeMX + CMake), and a 3D-printed chassis.
59 parts - 2 layers38.5 × 31 mm

TOF SCANNER
Circuit-Digest/EdgeSense
Real-time Edge AI firmware & desktop studio for STM32H533 and VL53L8CH 8x8 multi-zone dToF sensor. On-device 3D gesture recognition, surface texture classification, hand posture detection, and raw CNH optical histogram…
58 parts - 2 layers80 × 60 mm

Led controller
codeThatThinks/autotank-led-hw
A CANbus-enabled LED and GPIO controller -- PCB design files
86 partsMIT - 2 layers61.2 × 47.5 mm
