Skip to the content
PCBKitNew board

Microcontroller

177 boards

KiCad boards from 96 GitHub repositories tagged “microcontroller”, the most starred first; open any of them in PCBKit.

  • 2 layers50 × 40 mmBldc controller, the printed circuit board in 3D

    Bldc controller

    nerdmaennchen/motorcontroller-hw

    An open hardware PCB to control motors with (BLDC and DC)

    67 parts6MIT
  • 2 layers100 × 80 mmHorno reflujo, the printed circuit board in 3D

    Horno reflujo

    La-guajolota/Reflow_Oven

    DIY reflow oven

    46 parts5MIT
  • 2 layers70 × 50.1 mmDoom clock, the printed circuit board in 3D

    Doom clock

    stecman/avr-doomclock

    GPS clock on an ATTiny with MAX7219 7-segment driver

    24 parts5MIT
  • 2 layers102.1 × 53.8 mmProject Hanip, the printed circuit board in 3D

    Project Hanip

    AhmadHaniF1145/Projek-Mikrokontroller-Sensor-Gas

    Sistem pendeteksi kebocoran gas adalah sistem elektronik yang dirancang untuk mendeteksi dan memberi peringatan tentang kebocoran gas.

    26 parts4
  • 2 layers99.1 × 99.1 mmAt90s2323, the printed circuit board in 3D

    At90s2323

    atoomnetmarc/AVR-demo-board

    AVR demo boards for old AT90S* microcontrollers.

    171 parts4Apache-2.0
  • 2 layersOpensync, the printed circuit board in 3D

    Opensync

    ErichZimmer/OpenSync

    An open source synchronizer for velocimetry of fluids.

    230 parts4CERN-OHL-S-2.0
  • 2 layers100 × 100 mmPcb controller, the printed circuit board in 3D

    Pcb controller

    La-guajolota/Robotica

    Simuladores, calculadoras, recursos para el diseño de robots. Cinemática directa e inversa, dinemática, etc

    96 parts4MIT
  • 2 layers124.1 × 22.9 mmLoraWAN Stick, the printed circuit board in 3D

    LoraWAN Stick

    lostangles/LoraWAN-Stick

    Microcontroller + GPS Receiver + LoRaWAN radio

    37 parts4
  • 2 layers92 × 75.8 mmSTM32CrapSynth, the printed circuit board in 3D

    STM32CrapSynth

    LTVA1/STM32CrapSynth

    A crappy hardware synth using STM32F303 and 4 AD9833 waveform generators

    70 parts4MIT
  • 2 layers119.9 × 24.9 mmRl78-flash programmer, the printed circuit board in 3D

    Rl78-flash programmer

    prabhu-yu/rl78-flash-programmer

    This is a RL78 micro controller Flash Programmer PCB board designed using KiCAD. Very simple and economical to build under 6 US Dollers.

    22 parts4
  • 2 layers50 × 50 mmLED Cube MK3, the printed circuit board in 3D

    LED Cube MK3

    Binary-Kitchen/LED-cube-programmable

    4x4x4 single color, programmable LED cube

    32 parts3
  • 2 layers110 × 40 mmFramed board, the printed circuit board in 3D

    Framed board

    blinky101/blinky_lpc11uxx

    Blinky and tutorials for developing on the LPC11uxx platform

    106 parts3MIT
  • 4 layers103.4 × 101 mmTMPM4KNF10AFG, the printed circuit board in 3D

    TMPM4KNF10AFG

    lekevin01/Toshiba_Micromouse_TXZp

    Micromouse based on the TMPM4KNF10AFG Microcontroller

    91 parts3
  • 2 layers28.8 × 24.8 mmRelease modem mosfet atmega328p piezo, the printed circuit board in 3D

    Release modem mosfet atmega328p piezo

    waynepiekarski/hydro-modem

    HydroModem: Underwater Bell 103 modem implementation for low-power microcontrollers

    48 parts3GPL-3.0
  • 2 layers78.7 × 38.1 mmPCB2 Display, the printed circuit board in 3D

    PCB2 Display

    Andreas-Wahl/Startlight-HW

    SLOTCAR STARTLIGHT "Bären(n)keller - HARDWARE

    34 parts2
  • 4 layers102 × 102 mmController, the printed circuit board in 3D

    Controller

    Angelo13C/3d-printer

    Firmware, electronics, mechanics and control interface of a 3D printer

    97 parts2
  • 4 layers76.3 × 49.5 mmLPC43xx blinky board, the printed circuit board in 3D

    LPC43xx blinky board

    blinky101/blinky_lpc43xx

    Blinky and tutorials for developing on the LPC43xx platform

    66 parts2MIT
  • 2 layers125 × 125 mmBahayShield ULTRA RevA Manual, the printed circuit board in 3D

    BahayShield ULTRA RevA Manual

    cikeyz/bahayshield-ultra

    Offline flood and typhoon preparedness controller for Arduino Mega 2560 Pro: ultrasonic water level, BME280 pressure trend, TRI scoring, staged alerts, low-voltage relay cutoff.

    76 parts2MIT
  • 2 layers30 × 85.5 mmMain Deck Longitudinal v0.1, the printed circuit board in 3D

    Main Deck Longitudinal v0.1

    dgtaheno/RocketOS

    ESP32 flight computer with MAVLink telemetry, QGroundControl integration, GPS, BMP388 altimetry, INA219 power monitoring and fault-tolerant SD logging

    11 parts2MIT
  • 2 layers17.8 × 101.6 mmEurorackMicrocontrollerModule, the printed circuit board in 3D

    EurorackMicrocontrollerModule

    Fora888/Universal-Teensy-4.0-Eurorack-Shield

    Teensy 4.0 shield with ADC, DAC and breakouts for perfboard

    43 parts2
  • 4 layers40 × 58 mmSTM32-S Plant, the printed circuit board in 3D

    STM32-S Plant

    Fred98246/STM32-Environmental-Sensor-and-Datalogging-Board

    An open-source STM32F103C8T6 development board designed for environmental monitoring, featuring integrated Li-Ion battery management, USB-C, MicroSD data logging, and onboard I2C sensors for temperature, humidity, and…

    59 parts2MIT
  • 4 layers50.8 × 20.8 mmMotherboard, the printed circuit board in 3D

    Motherboard

    HashDefineElectronics/HDEC-000745

    Robot and image processing developement platform

    22 parts2
  • 2 layers58.4 × 127 mmExternalPCB, the printed circuit board in 3D

    ExternalPCB

    Kllngii/Wetterstation

    Es sollen mit einem Mikrocontroller mehrere Sensordaten erfasst und aufbereitet werden

    31 parts2