
Minikbd
andyclymer/minikbd
The MiniKbd is a USB device based on the Adafruit Trinket M0 development board which is programmable with CircuitPython.
KiCad boards from 2,073 GitHub repositories tagged “kicad”, the most starred first; open any of them in PCBKit.

andyclymer/minikbd
The MiniKbd is a USB device based on the Adafruit Trinket M0 development board which is programmable with CircuitPython.

4ms/4ms-kicad-lib
libraries for KiCAD schematics and footprints



Franzininho/franzininho-diy-board
Placa Franzininho DIY - Placa compatível com Arduino no formato DIY para oficinas de soldagem

sszczep/Cherry-MX-Breakout-Board
Cherry MX Breakout Boards with reverse-mounted addressable RGB LED and hot-swap.

ChrisChrisLoLo/bancouver40
A 4x10 CFX spaced low-profile mechanical keyboard.


Fescron/universal-jlink-adapter
20 pin SWD/JTAG J-Link to 10 pin (0.1" and 0.05") reconfigurable Cortex-M header with power supply and TagConnect compatibility, as well as with a reset button.


anyshake/explorer
🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.

GuitarML/GuitarPedalSTM32
Guitar pedal using a stm32h7 microcontroller programmed with CubeIDE (PCB and Firmware)

NikodemBartnik/StarTrckr
Open source star tracker for deep sky astrophotography

crmaykish/mackerel-68k
A series of single-board Motorola 68k computers with support for modern Linux

portlandhodl/nyan-keys-hardware
Hardware document for the nyan keys keyboard

productize/kicad-automation-scripts
A bunch of scripts to automate KiCad processes


polykit/polykit-x-monosynth
The Polykit X1 is a DIY semi-modular, analog, patchable synthesizer

uCAN-LIN/LinUSBConverter
Open source USB ↔ LIN bus dongle. LIN 2.1 master / slave / monitor, optically isolated, SLCAN compatible — no proprietary drivers.



KOEGlike/meko
A linux music player with ddr3, a 70hz e-paper display and a haptic touchpad

ZoidTechnology/PCIce
A PCI Express card with an inbuilt PWM fan controller and mounting points for an 80mm fan.

OpenDrone-hw/OpenESC-30x30
Open-source 4-in-1 AM32 ESC for FPV drones. 30.5x30.5 mm, 2-8S, one MCU per motor, CERN-OHL-S-2.0.