2 layers79.2 × 54.5 mm
Tft design
cmdsreedev/tft-dashboard-pcb
Two-layer ESP32 carrier PCB for an SPI TFT display and rotary encoder, designed in KiCad.
8 parts
Hardware
1,802 boardsKiCad boards from 760 GitHub repositories tagged “hardware”, the most starred first; open any of them in PCBKit.
- 2 layers31 × 46.5 mm
Vibro Band
connormmckelvey/TACTUS-Medical-Robotics-FRI-Project
A low cost, vibrotactile band and computer vision system to train large motor skills and provide haptic feedback for robotic teleoperation.
6 parts - 2 layers172.7 × 133.4 mm
- 2 layers68.9 × 51.8 mm
E80-900M2213S SE050 Breakout
cvaldess/E80-900M2213S_SE050_Breakout
Breakout board for the Ebyte E80-X00M221XS (LR1121/LR2021 dual-band LoRa) with an NXP SE050 secure element — KiCad 10
18 partsGPL-3.0 - 2 layers16.4 × 14.6 mm
- 2 layers12.9 × 6 mm
- 2 layers13 × 1.4 mm
Musica
cybloxyz/tap-tap-trulala
RFID music player, modification or improvitation from juukebox by ananords (instructables)
13 parts - 4 layers21 × 51 mm
Quince micro lite
cyrusdreams/quince_micro_lite
A CH32V305 development board with Debugger option. Capable of interfacing with a PicoCalc mainboard.
46 parts - 2 layers61 × 61.2 mm
Scooter board
d0ng3o/esp32_turd_scooter_controller
Open-source ESP32-C3 replacement control board + ESP-IDF firmware for a decommissioned Bird One e-scooter, plus the reverse-engineered Lishui one-wire bus protocol.
39 partsGPL-3.0 - 2 layers55.8 × 55.8 mm
ControlBoard
D3epCr3ature/RE-CPNV-ElectronicDice
Reverse engineering of an electronic dice assembled during my diploma of Vocational Education and Training (VET) in electronics.
27 parts - 2 layers96.4 × 90.9 mm
MiniPad
DagaVedant/MiniPad
a 3x3 qmk macropad with a rotary encoder, rgb keys, and an oled with a clock and a spinning globe
34 partsMIT - 2 layers69.5 × 97 mm
Kicad schematic
DagaVedant/NotGoingToBeLateToSchool
a 9-key bedside alarm clock thats also a ambient info display, wakes you up by telling your phone to play Spotify, and only lets you snooze three times before you have to type a code to shut it up.
25 partsMIT - 2 layers65 × 45 mm
Smartbin hat
DagaVedant/SmartBin
a sorting head that drops into a normal trash can and puts recyclables in the right side by itself
34 parts - 2 layers98 × 51.6 mm
Piano lights
ddribin/piano-lights-hw
Specialized hardware to displays lights (LEDs) over piano keys
41 partsMIT - 2 layers37.8 × 27.4 mm
Es pir esence
Derisis13/es-pir-esence
small pcb for connecting an ESP8266 module to a PIR sensor.
21 partsCC-BY-SA-4.0 - 2 layers77.5 × 100 mm
Rover pdb
devkyber/PCB
AI-assisted PCB engineering for native KiCad: source evidence, scoped changes, checked previews, human review, and reproducible release packages.
93 parts - 2 layers36.1 × 25.7 mm
Hotswap tb
dodotronix/breakout_pcbs
This is repository, where i place all small modules, which i need to test separately, or want to use it on a contact array
23 parts - 2 layers45.5 × 19 mm
Board vl6180x
dodotronix/Sensors
Sensors which i used and created codes (and evetualy made a board layouts) for fast implementation and tests
19 parts - 12 layers
AnalogLineFollower
drvnprgrmr/AnalogLineFollower
Source files for both electrical and mechanical designs for an Analog Line Following robot.
22 parts - 2 layers54 × 54 mm
Steppers
eddyem/mmpp
MMPP (Multimode photometer-polarimeter) for the telescope Zeiss-1000 of SAO RAS.
55 partsGPL-3.0 - 2 layers50.8 × 50.8 mm
- 2 layers20.5 × 19 mm
Nwpi
elektricM/nwpi-pcb
NWPi custom PCB - Power module for Raspberry Pi Zero inside NumWorks calculator
18 partsCERN-OHL-S-2.0 - 4 layers39 × 119.5 mm
- 2 layers21 × 51 mm
Devboard
emilyahmad/devboard
RP2040 MCU, USB-C connector, SPI flash memory, 2 switches, a crystal oscillator
38 parts