
DO AN DKTD
PHAP0610/ThaoRDBoard
All file include and source in this: https://github.com/nguyentrungthao/STM32/tree/dev

small pcb for connecting an ESP8266 module to a PIR sensor.
Es pir esence is an open-source printed circuit board by Derisis13, from the Derisis13/es-pir-esence repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 37.8 × 27.4 mm with 21 parts on 19 nets, routed with 60 tracks and 6 vias.
It is built around the ESP-07 and AMS1117. Its parts include 7 resistors, 4 capacitors, 3 connectors, 2 ICs and 2 switches. It belongs with the home automation and IoT and sensors and measurement boards and the ESP8266 boards of this library.
A small circuit to detect presence with an ESP8266 module and a PIR sensor. My idea is to use ESPHome to connect the circuit to HomeAssistant for home automation or security.
Schematic:

Layout:

ES-PIR-esence (c) by HA5PLS
ES-PIR-esence is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
You should have received a copy of the license along with this work. If not, see http://creativecommons.org/licenses/by-sa/4.0/.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 2 | ? | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C4 |
| 1 | 150R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 22uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C3 |
| 1 | 5V_IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | AMS1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BOOT_SEL | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | ESP-07 | RF_Module:ESP-07 | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | PIR | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |

PHAP0610/ThaoRDBoard
All file include and source in this: https://github.com/nguyentrungthao/STM32/tree/dev

GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.



ezcGman/tiny-power-meter
A very tiny 3-phase power meter to measure your homes power consumption and report to Home Assistant!

martin2250/SinglePhaseEnergyMonitor
an adapter to plug between a device and an outlet, to monitor electricity usage and provide data to influxdb


It measures 37.8 × 27.4 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the ESP-07 and AMS1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Derisis13/es-pir-esence repository on GitHub, at the commit this page was made from: the board is es-pir-esence.kicad_pcb and its schematic es-pir-esence.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).