2 layers217 × 116 mm
Board nhiet
NguyenThanhHuy-debug/PCB-Liquid-Dispensing-Cabinet
PCB-Liquid-Dispensing-Cabinet — a software project built with modern tooling.
191 parts4
2 layers96 × 97.3 mm
DO AN DKTD
PHAP0610/ThaoRDBoardAll file include and source in this: https://github.com/nguyentrungthao/STM32/tree/dev
- Size
- 96 × 97.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 164
- Nets
- 150
- Pads
- 582
- Tracks, vias
- 951, 383
- Pours
- 570
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Jul 2023
- Updated
- 30 Jul 2023
Overview
DO AN DKTD is an open-source printed circuit board by PHAP0610, from the PHAP0610/ThaoRDBoard repository on GitHub. It is a 2-layer board of 96 × 97.3 mm with 164 parts on 150 nets, routed with 951 tracks and 383 vias.
It is built around the ESP-07, XL1509-3.3 and 74HC595, with the 24C32N, AMS1117 and MOC3020M among its other parts. Its parts include 56 resistors, 35 capacitors, 13 connectors, 11 ICs and 10 transistors. It belongs with the ESP8266 and STM32 boards of this library.
Main components
11
ESP-07
SMD-16P,21.2x16mm-40℃~+125℃ -98dBm 19.5dBm 2.4GHz 3.3V 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、I2C、HSPI、I2S SMD-16P,21.2x16mm WiFi Modules ROHSAi-ThinkerWiFi Modules
XL1509-3.3
SOP-8-40℃~+125℃@(TJ) 1 150kHz 2A 2mA 3.3V 4.5V~40V Buck Buck Built-in Fixed No SOP-8 DC-DC Converters ROHSUMWDC-DC Converters
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
24C32N
PDIP-8PDIP-8 EEPROM ROHSGAOGE MICROCHIPEEPROM
AMS1117
1.0 A Low-Dropout Fixed RegulatorAdvanced Monolithic SystemsUncategorised
MOC3020M
DIP-6-40℃~+85℃ 1 1.15V 4.17kV 400V 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output Optoisolators
SS54
SMA(DO-214AC)-55℃~+125℃ 1mA@40V 40V 550mV@5A 5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
BAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky Diodes
CR1220-2
--40~80℃ Battery base CR1220 Phosphor bronze - Battery holder base ROHSQ&JButton And Strip Battery Connector
MB10F
MBF-55℃~+150℃ 1.1V@500mA 1A 1kV 35A 5uA@1kV Single-Phase Rectifier MBF Bridge Rectifiers ROHSMDDBridge Rectifiers
SMF05C
SC-88-40℃~+125℃ 100W@8/20us 12.5V 5 5V 7.2V 70nA 80pF 8A@8/20us IEC 61000-4-2 TVS SC-88 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)
README
README.mdSTM32F103
Hardware BOARD V0.1
All file include and source in this: https://github.com/nguyentrungthao/STM32/tree/dev
Module 7 segment with two ic 74595
- Pin configuration.
| STM32 | 74595 |
|---|---|
| PA4 | SER |
| PA5 | OE |
| PA6 | RCLK |
| PA7 | SRCLK |
- Code
high 8-bit to select a 7-segment digit low 8-bit is code-7-segment code7segment is used in this board sequence:
/* this code only use for this version board */
const char code7seg[] = {0xD7, 0x14, 0xCD, 0x5D, 0x1E, 0x5B, 0xDB, 0x15, 0xDF, 0x5F};Module rotary encoder
- Pin configuration
| STM32 | Rotary Encoder | description |
|---|---|---|
| PA8 | channel A | pull up |
| PA9 | channel B | pull up |
| PA10 | buttuon | pull up |
- Code
PA8 - PA9 is encoder mode of timer1
/* Enable TIM1 encoder mode */
/* USER CODE BEGIN 2 */
HAL_TIM_Encoder_Start_IT(&htim1, TIM_CHANNEL_ALL);
/* USER CODE END 2 */
/* Get encoder value */
encoderValue = __HAL_TIM_GetCounter(&htim1);AC voltage control
- Pin configuration
| STM32 | Module | description |
|---|---|---|
| PB0 | AC Detec | pull up |
| PB1 | Triac |
- code
PB0 should be an EXT pin
/* proccess when interrupt */
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin){
if(GPIO_Pin == ACDET_Pin){
SETFLAG(FLAG_ACDET_TRIGGER, flag);
// control angle to set triac base on time which is calculated by PID
__HAL_TIM_SET_COUNTER(&htim4, (uint16_t)(triac.giaTriDieuKhien * 1000));
// __HAL_TIM_SET_COUNTER(&htim4, 9000);
}
}Parts
164| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 1k | IVS_FOOTPRINTS:R_0603 | R10, R11, R12, R13, R14, R15, R16, R17, R22, R24, R30, R31, R41, R44, R47, R48 +2 |
| 14 | 100nF | IVS_FOOTPRINTS:C_0603 | C2, C4, C9, C10, C11, C19, C21, C23, C26, C32, C33, C34, C35, C36 |
| 11 | 1uF | IVS_FOOTPRINTS:C_0603 | C1, C3, C15, C16, C17, C18, C22, C25, C29, C30, C31 |
| 10 | 4k7 | IVS_FOOTPRINTS:R_0603 | R1, R2, R3, R4, R5, R7, R8, R26, R27, R55 |
| 8 | NPN | IVS_FOOTPRINTS:SOT23-3 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 7 | 2k | IVS_FOOTPRINTS:R_0603 | R18, R28, R29, R36, R37, R38, R39 |
| 7 | Led | IVS_FOOTPRINTS:LED_0603 | LE3, LE4, LE5, LE6, LE7, LE8, LE9 |
| 6 | 10k | IVS_FOOTPRINTS:R_0603 | R33, R34, R35, R43, R45, R46 |
| 3 | 10uF | IVS_FOOTPRINTS:C_0603 | C7, C14, C20 |
| 3 | SW_Push | IVS_FOOTPRINTS:SW_SPST_PTS810 | SW2, SW3, SW4 |
| 2 | 100R | IVS_FOOTPRINTS:R_0603 | R58, R59 |
| 2 | 10K | IVS_FOOTPRINTS:R_0603 | R61, R62 |
| 2 | 10nF | IVS_FOOTPRINTS:C_0603 | C5, C6 |
| 2 | 10uF | IVS_FOOTPRINTS:C_0805 | C24, C27 |
| 2 | 180k | IVS_FOOTPRINTS:R_0603 | R6, R9 |
| 2 | 1M | IVS_FOOTPRINTS:R_0603 | R40, R60 |
| 2 | 22pF | IVS_FOOTPRINTS:C_0603 | C12, C13 |
| 2 | 74HC595 | IVS_FOOTPRINTS:SOIC-16W_3.92x10.2mm | U2, U6 |
| 2 | Conn_01x02 | IVS_FOOTPRINTS:KF128-5.0-2P | J2, J5 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J11, J12 |
| 2 | Fuse | IVS_FOOTPRINTS:Fuse_1812_4532Metric | F2, F3 |
| 2 | LOGO | IVS_FOOTPRINTS:LoGo_IDF_2.5x2.5mm | G***, G*** |
| 2 | LOGO | IVS_FOOTPRINTS:LoGo_ST_2.5x1.5mm | G***, G*** |
| 2 | LOGO | IVS_FOOTPRINTS:LoGo_1412_10x8mm | G***, G*** |
| 2 | SS54 | IVS_FOOTPRINTS:D_SMA | D6, D8 |
| 1 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 | |
| 1 | 100 | IVS_FOOTPRINTS:R_0603 | R42 |
| 1 | 12k | IVS_FOOTPRINTS:R_0603 | R32 |
| 1 | 1N4148 | IVS_FOOTPRINTS:D_SOD323 | D3 |
| 1 | 22k | IVS_FOOTPRINTS:R_0603 | R21 |
| 1 | 24C32N | IVS_FOOTPRINTS:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | 360 | IVS_FOOTPRINTS:R_0805 | R23 |
| 1 | 360 | IVS_FOOTPRINTS:R_0603 | R25 |
| 1 | 39 | IVS_FOOTPRINTS:R_0603 | R19 |
| 1 | 470 | IVS_FOOTPRINTS:R_0603 | R20 |
| 1 | 50nF | IVS_FOOTPRINTS:C_0603 | C8 |
| 1 | 5631AS | IVS_FOOTPRINTS:7Segment_4led_CC_38x19 | LE1 |
| 1 | 5631AS | IVS_FOOTPRINTS:7Segment_4led_Cathode_30x14mm | LE2 |
| 1 | 68uH 2A | IVS_FOOTPRINTS:L_10.4x10.4_H4.8 | L1 |
| 1 | AMS1117 | IVS_FOOTPRINTS:SOT233 | U1 |
| 1 | Ai-Thinker-Ra-02 | IVS_FOOTPRINTS:MODULE_RA-02_LORA | U9 |
| 1 | BAT54C | IVS_FOOTPRINTS:SOT23-3 | D4 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | CR1220 | IVS_FOOTPRINTS:BatteryHolder_CR1220 | BT1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J13 |
| 1 | Conn_01x03 | IVS_FOOTPRINTS:Conn_XH-P2.54mm-3P | J4 |
| 1 | Conn_01x04 | IVS_FOOTPRINTS:Conn_XH-P2.54mm-4P | J3 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J7 |
| 1 | Conn_01x07 | IVS_FOOTPRINTS:Conn_XH-P2.54mm-7P | J1 |
| 1 | Crystal_GND24_Small | IVS_FOOTPRINTS:Crystal_3225_4P_3.2x2.6mm | Y1 |
| 1 | D_Schottky | IVS_FOOTPRINTS:D_SOD323 | D7 |
| 1 | ESP-07 | IVS_FOOTPRINTS:ESP8266-07__ESP32-C3-12F | U10 |
| 1 | Fuse | IVS_FOOTPRINTS:Fuseholder_Littelfuse_Nano2_154x | F1 |
| 1 | Jack-DC | IVS_FOOTPRINTS:BarrelJack_Wuerth_6941xx301002 | J10 |
| 1 | MB10F | IVS_FOOTPRINTS:Bridge_MB10F-13 | D1 |
| 1 | MOC3020M | IVS_FOOTPRINTS:DIL06-E | U4 |
| 1 | Micro_SD_Card_Det1 | IVS_FOOTPRINTS:MicroSD_Socket_9P | J8 |
| 1 | N_Mosfet | IVS_FOOTPRINTS:SOT23-3 | Q9 |
| 1 | PC817 | IVS_FOOTPRINTS:OPTO_SOT254P975X400-4N | U3 |
| 1 | P_Mosfet | IVS_FOOTPRINTS:SOT23-3 | Q10 |
| 1 | RTC_DS3231M | IVS_FOOTPRINTS:SOIC-16W_7.5x10.3mm_P1.27mm | IC1 |
| 1 | RotaryEncoder_Switch | IVS_FOOTPRINTS:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | SMF05C | IVS_FOOTPRINTS:TSSOP-6 | D5 |
| 1 | STM32F103C8Tx | IVS_FOOTPRINTS:LQFP-48_7x7mm_P0.5mm | U7 |
| 1 | TRIAC | IVS_FOOTPRINTS:TO-220-3_Vertical | D2 |
| 1 | USB_C_Receptacle | IVS_FOOTPRINTS:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J9 |
| 1 | XL1509 | IVS_FOOTPRINTS:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
The 159 most common of 164 parts.
Similar boards
- 2 layers100 × 100 mm
Smart air
meeTeam05/smart-air
Devices provision over BLE, publish telemetry/shadow over MQTT, and serve the app through a Cloudflare-fronted Fastify API. See Features below for the full breakdown.
70 parts1MIT - 2 layers99.4 × 99.3 mm
IoT2526 HK2
Chethien1912/IoT-Environmental-Monitoring-System
ESP32-based IoT environmental monitoring project semester 2 2025-2026 HCMUTE
78 partsMIT - 2 layers193.3 × 111.3 mm
- 2 layers50.1 × 16.8 mm
PS-5V1.4A-7W EE13-Demo board
TDLOGY/HW_AC-DC-Flyback-5W-5V1A-Reference-Design
AC DC Flyback 5W 5V1A Reference Design
24 parts4 - 2 layers101.6 × 50.8 mm
Light switch
NguyenThanhHuy-debug/PCB_Real-Time-Power-Monitoring-System-Development-Light-Switch
PCBReal-Time-Power-Monitoring-System-Development-Light-Switch — a software project built with modern tooling.
142 parts2 - 2 layers91 × 58 mm
- 2 layers98.1 × 99.7 mm
Questions
How big is the DO AN DKTD PCB?
It measures 96 × 97.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DO AN DKTD use?
164 parts, built around the ESP-07, XL1509-3.3, 74HC595 and 24C32N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DO AN DKTD KiCad files?
From the PHAP0610/ThaoRDBoard repository on GitHub, at the commit this page was made from: the board is PCB/DO_AN_DKTD.kicad_pcb and its schematic PCB/DO_AN_DKTD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DO AN DKTD design in my own project?
Its repository states no licence, so its author keeps all rights: ask PHAP0610 before reusing the design.