
Lilygo
Ndambia/lilygo
A custom 4-layer KiCad PCB design integrating an ESP32 Wi-Fi/Bluetooth microcontroller with a SIM7600G-H 4G LTE Cat-4 cellular module, comprehensive power management, GPS tracking, GPRS connectivity, USB-C charging…

GATEWAY HARDWARE V1 is an open-source printed circuit board by kori-thespirit, from the kori-thespirit/LoraGatewayDevelopment repository on GitHub, published under the MIT licence. It is a 2-layer board of 193.3 × 111.3 mm with 224 parts on 210 nets, routed with 1,590 tracks and 1,457 vias.
It is built around the TPS5430DDA, AMS1117-3.3 and BWU.FL-IPEX1, with the BC817, MMBT3904 and PSD12C among its other parts. Its parts include 73 resistors, 65 capacitors, 6 diodes, 5 transistors and 5 inductors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100nF | IVS_FOOTPRINTS:C_0603 | C2, C13, C16, C21, C27, C33, C35, C58, C69, C70, C71, C72, C73, C600, C601 |
| 13 | TestPoint | IVS_NEW_FOOTPRINT:TestPoint_throughtHole_D1.0mm | CS1, ESP_RX1, ESP_SCL0, ESP_SDA0, ESP_TX1, GND, GND, GND, GND0, GND1, MISO1, MOSI1, SCK1 |
| 12 | ~ | IVS_NEW_FOOTPRINT:TestPoint_throughtHole_D1.0mm | +1.8V1, CLK0, CS0, MISO0, MOSI0, PWRKEY1, RESET1, RX0, RXD1, TX0, TXD1, VDD_AUX1 |
| 11 | 10K | IVS_FOOTPRINTS:R_0603 | R66, R67, R68, R71, R72, R74, R75, R76, R78, R79, R80 |
| 10 | 10K/0603/1% | IVS_FOOTPRINTS:R_0603 | R17, R18, R19, R20, R21, R24, R25, R29, R33, R34 |
| 8 | 33R | IVS_FOOTPRINTS:R_0603 | R63, R65, R69, R70, R84, R85, R86, R87 |
| 7 | 4K7 | Resistor_SMD:R_0603_1608Metric | R39, R42, R48, R49, R60, R64, R100 |
| 5 | 0 | Resistor_SMD:R_0603_1608Metric | R40, R44, R45, R47, R59 |
| 4 | 10uF | IVS_FOOTPRINTS:C_0603 | C1, C20, C36, C66 |
| 4 | 1uF | IVS_FOOTPRINTS:C_0603 | C12, C15, C34, C57 |
| 4 | MountingHole | IVS_FOOTPRINTS:MountingHole_3.2mm_M3_Pad_Via | H1, H1, H1, H1 |
| 4 | NC | Capacitor_SMD:C_0603_1608Metric | C42, C43, C44, C45 |
| 3 | 10nF | IVS_FOOTPRINTS:C_0603 | C14, C59, C63 |
| 3 | 22 | Resistor_SMD:R_0603_1608Metric | R56, R57, R58 |
| 3 | 33pF | Capacitor_SMD:C_0603_1608Metric | C46, C48, C86 |
| 3 | 470uF/35V | Capacitor_SMD:CP_Elec_10x10.5 | C8, C9, C79 |
| 3 | 47K | Resistor_SMD:R_0603_1608Metric | R41, R46, R61 |
| 3 | ANT_LTE | IVS_NEW_FOOTPRINT:Conn_IPEX_ANT | J10, J11, J12 |
| 3 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4 |
| 3 | L | IVS_NEW_FOOTPRINT:L_0603_1608Metric | L3, L4, L5 |
| 3 | Led | IVS_FOOTPRINTS:LED_0603 | LE1, LE2, LE3 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C41, C49 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C81, C85 |
| 2 | 100nF | IVS_FOOTPRINTS:C_0805 | C11, C19 |
| 2 | 10k | IVS_FOOTPRINTS:R_0603 | R11, R13 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C80, C84 |
| 2 | 10uF | IVS_FOOTPRINTS:C_0805 | C10, C18 |
| 2 | 15uH | IVS_NEW_FOOTPRINT:L_Bourns_SRR1208_12.7x12.7mm | L1, L2 |
| 2 | 18pF | IVS_FOOTPRINTS:C_0603 | C55, C56 |
| 2 | 1k | IVS_FOOTPRINTS:R_0603 | R14, R15 |
| 2 | 1nF | IVS_FOOTPRINTS:C_0603 | C250, C253 |
| 2 | 22R | IVS_FOOTPRINTS:R_0603 | R652, R653 |
| 2 | 330 | IVS_FOOTPRINTS:R_0603 | R96, R97 |
| 2 | 471/2k | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C5, C7 |
| 2 | 49R9 | IVS_FOOTPRINTS:R_0603 | R92, R93 |
| 2 | 5K1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R650, R651 |
| 2 | 6.8nF | IVS_FOOTPRINTS:C_0603 | C67, C68 |
| 2 | 82R | IVS_FOOTPRINTS:R_0603 | R89, R90 |
| 2 | Led | LED_SMD:LED_0603_1608Metric | LE5, LE8 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q8 |
| 2 | PSD12C | Diode_SMD:D_SOD-323 | D60, D61 |
| 2 | SS54 | IVS_FOOTPRINTS:D_SMA | D2, D7 |
| 2 | SW_Push | IVS_NEW_FOOTPRINT:SW_SPST_PTS810 | SW1, SW2 |
| 2 | SolderJumper_2_Open | IVS_NEW_FOOTPRINT:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | TPS5430DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U7, U11 |
| 1 | 0.1uF/275VAC | IVS_FOOTPRINTS:C_Rect_L16.5mm_W5.0mm_P15.00mm_MKT | C6 |
| 1 | 1.5A | IVS_FOOTPRINTS:Fuse_1812_4532Metric | F2 |
| 1 | 10 Ohm | IVS_NEW_FOOTPRINT:R_0603_1608Metric | R82 |
| 1 | 100R | IVS_FOOTPRINTS:R_0603 | R35 |
| 1 | 100uF/35V/7343 | Capacitor_Tantalum_SMD:CP_EIA-7132-28_AVX-C_Pad2.72x3.50mm_HandSolder | C22 |
| 1 | 10D561 | IVS_FOOTPRINTS:RV_Disc_D12mm_W5.8mm_P7.5mm | RV1 |
| 1 | 10R | IVS_FOOTPRINTS:R_0603 | R95 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R101 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C82 |
| 1 | 12K4/1% | IVS_FOOTPRINTS:R_0603 | R88 |
| 1 | 18pF | Capacitor_SMD:C_0603_1608Metric | C90 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R62 |
| 1 | 1K/0603/5% | IVS_FOOTPRINTS:R_0603 | R1 |
| 1 | 1K5 | IVS_FOOTPRINTS:R_0603 | R654 |
| 1 | 1M | IVS_FOOTPRINTS:R_0603 | R73 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R102 |
| 1 | 20mH | IVS_FOOTPRINTS:ACFilterChokeUU9.8 | FL1 |
| 1 | 22nF | IVS_FOOTPRINTS:C_0603 | C65 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 2A | IVS_TTT_FOOTPRINTS:Fuse_HolderGlass5x20mm | F1 |
| 1 | 330uF/6v3 | Capacitor_SMD:CP_Elec_6.3x7.7 | C17 |
| 1 | 330uF/6v3 | IVS_FOOTPRINTS:CP_Elec_6.3x7.7 | C83 |
| 1 | 3k3 | IVS_FOOTPRINTS:R_0603 | R12 |
| 1 | 4.7nF | IVS_FOOTPRINTS:C_0603 | C74 |
| 1 | 4.7uF | IVS_FOOTPRINTS:C_0603 | C61 |
| 1 | 470pF | IVS_FOOTPRINTS:C_0603 | C251 |
| 1 | 4K7 | IVS_FOOTPRINTS:R_0603 | R250 |
| 1 | 4V | IVS_NEW_FOOTPRINT:TestPoint_throughtHole_D1.0mm | TP13 |
| 1 | 5V | IVS_NEW_FOOTPRINT:TestPoint_throughtHole_D1.0mm | TP1 |
| 1 | 5V1 | IVS_NEW_FOOTPRINT:D_SOD-123 | D3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | BAT54C | IVS_FOOTPRINTS:SOT23-3 | D1 |
| 1 | CR1220 | IVS_FOOTPRINTS:BatteryHolder_CR1220 | BT1 |
| 1 | C_Polarized | IVS_NEW_FOOTPRINT:CP_Elec_6.3x7.7 | C23 |
| 1 | Conn_01x04_Pin | IVS_NEW_FOOTPRINT:Conn_XH-P2.54mm-4P | J2 |
The 207 most common of 224 parts.

Ndambia/lilygo
A custom 4-layer KiCad PCB design integrating an ESP32 Wi-Fi/Bluetooth microcontroller with a SIM7600G-H 4G LTE Cat-4 cellular module, comprehensive power management, GPS tracking, GPRS connectivity, USB-C charging…

NguyenThanhHuy-debug/PCB-Liquid-Dispensing-Cabinet
PCB-Liquid-Dispensing-Cabinet — a software project built with modern tooling.

luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.


Lucas-Poulos/rtk-gps-module
Cheap dual-band L1+L5 RTK GNSS module. LC29H rover, discrete 50 ohm front end, USB-C + castellated. Schematic generated from Python and verified by a 146-check gate.


PHAP0610/ThaoRDBoard
All file include and source in this: https://github.com/nguyentrungthao/STM32/tree/dev

El-Luhb/nvme-Carrier-for-LattePanda-Mu
nvme Carrier PCB for the LattePanda Mu compute module
It measures 193.3 × 111.3 mm and has 2 copper layers, 1.6 mm thick.
224 parts, built around the TPS5430DDA, AMS1117-3.3, BWU.FL-IPEX1 and BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kori-thespirit/LoraGatewayDevelopment repository on GitHub, at the commit this page was made from: the board is hardware/gateway_hardware_schematic/GATEWAY_HARDWARE_V1.kicad_pcb and its schematic hardware/gateway_hardware_schematic/ESP32-S3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).