
Root
GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.

Esp adapter is an open-source printed circuit board by danielkucera, from the danielkucera/tuya-esp-adapter repository on GitHub. It is a 2-layer board of 16 × 19.6 mm with 4 parts on 14 nets, routed with 116 tracks and 26 vias.
It is built around the ESP-07. Its parts include 3 connectors and 1 IC. It belongs with the interfaces and adapters boards and the ESP8266 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_01x02_Male | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J3 |
| 1 | Conn_01x11_Male | Connector_PinHeader_1.00mm:PinHeader_1x11_P1.00mm_Vertical | J2 |
| 1 | Conn_01x11_Male | edge-conn:edge-conn | J1 |
| 1 | ESP-07 | RF_Module:ESP-07 | U1 |

GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.



ezcGman/tiny-power-meter
A very tiny 3-phase power meter to measure your homes power consumption and report to Home Assistant!

martin2250/SinglePhaseEnergyMonitor
an adapter to plug between a device and an outlet, to monitor electricity usage and provide data to influxdb


AirMQ/AirMQ-sensor
Root repository for AirMQ hardware project

It measures 16 × 19.6 mm and has 2 copper layers, 1 mm thick.
4 parts, built around the ESP-07. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the danielkucera/tuya-esp-adapter repository on GitHub, at the commit this page was made from: the board is esp-adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask danielkucera before reusing the design.