Skip to the content
2 layers140 × 27 mmVFD IV 18, the printed circuit board in 3D

這是一個基於 ESP8266 微控制器,驅動 IV-18 型真空螢光顯示管的專案

Size
140 × 27 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
48
Pads
164
Tracks, vias
410, 44
Pours
3
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
25 Jul 2022
Updated
8 Jun 2025

Parts

42
QtyValueFootprintReferences
510kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5, R6, R7, R8, R9
4100nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C5, C6
34k7Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R3, R4
2Jumper_2_OpenJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP4, JP5
1100uCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC4
110kPotentiometer_THT:Potentiometer_Bourns_PTA2043_Single_SlideRV1
110uCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC3
11N4148Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1
12N7002KPackage_TO_SOT_SMD:SOT-23Q3
132KHzTestPoint:TestPoint_Pad_D1.0mmTP2
1330Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2
1AP1117-33Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1BLANKTestPoint:TestPoint_Pad_D1.0mmTP3
1BMPX80Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalM2
1BST-5523SA Buzzer_Beeper:BST-5523SABZ1
1CR2032Battery:BatteryHolder_Keystone_3002_1x2032BT1
1DS3231MPackage_SO:SOIC-16W_7.5x10.3mm_P1.27mmU2
1ESP-07RF_Module:ESP-07U1
1F1TestPoint:TestPoint_Pad_D1.0mmTP4
1F1Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP2
1F2Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP3
1F2TestPoint:TestPoint_Pad_D1.0mmTP5
1S8050Package_TO_SOT_SMD:SOT-23Q1
1S8550Package_TO_SOT_THT:TO-92_InlineQ2
1SHT3XConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalM1
1SYSConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ3
1USB_B_MicroConnector_USB:USB_Micro-B_GCT_USB3076-30-AJ2
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_Palconn_UTC16-GJ1
1VFDConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ5
1VFDBLANKJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1
1light barConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1nRSTTestPoint:TestPoint_Pad_D1.0mmTP1

More from pondahai/VFD_IV_18

1
  • 2 layers65.3 × 27 mmVFD, the printed circuit board in 3D

    VFD

    pondahai/VFD_IV_18

    這是一個基於 ESP8266 微控制器,驅動 IV-18 型真空螢光顯示管的專案

    5 parts2

Similar boards

  • 2 layers98 × 68 mmNano X ESP V3, the printed circuit board in 3D

    Nano X ESP V3

    poypok/Nano-X-ESP

    PCB Desain IOT ATmega 328 and ESP chip

    52 parts
  • 2 layers77.2 × 44.5 mmEsp32 rtc display, the printed circuit board in 3D

    Esp32 rtc display

    beer88/PCB-Projects-Kicad

    This repository contains a collection of PCB design projects developed using KiCad, covering a range of applications in embedded systems, automation, and hardware development.

    55 parts1
  • 2 layersIEC-62056-21-Optical Probe, the printed circuit board in 3D

    IEC-62056-21-Optical Probe

    twam/IEC-62056-21-Optical-Probe

    Optical-Probe for reading out power meters supporting IEC 62056-21 via USB

    38 parts33
  • 2 layers116.9 × 37.5 mmPower Control Circuit, the printed circuit board in 3D

    Power Control Circuit

    ambadran/spot-welder

    Battery Spot Welder Circuit Using Capactive Discharge (CD) Circuit

    41 parts2
  • 2 layers40.5 × 36.6 mmXDuinoRails Hermes M, the printed circuit board in 3D

    XDuinoRails Hermes M

    xDuinoRails/xDuinoRails_Hermes-M

    Your DCC/Railcom signals and a +5V power source for your microcontroller on a breadboard

    27 parts2CERN-OHL-W-2.0
  • 6 layers30 × 20.1 mmXDuinoRails Thor M, the printed circuit board in 3D

    XDuinoRails Thor M

    xDuinoRails/xDuinoRails_Thor

    Make a Seeed XIAO board a mtc21 decoder, all the electronics needed is on this little board: - mtc21/plux16 compatible connector - DC Motor - 2x Functions - DCC / DCC-ACK / RailCom

    46 parts1
  • 2 layers90.7 × 55.4 mmH bridge V3, the printed circuit board in 3D

    H bridge V3

    ambadran/Revolute_Joint

    Optimal Cheap Robotic Actuator allowing high Torque and moderate Speed. Allow PRECISE Absolute, Speed and Torque Control. Using 3D-printed Cycloidal Drive, Custom PCB and LQR Control Algorithm.

    57 parts
  • 2 layers99.1 × 99 mmXDuinoRail Debug, the printed circuit board in 3D

    XDuinoRail Debug

    chatelao/xDuinoRail-Decoder

    The friendly decoder development plattform for model railroad tinkers.

    170 partsAGPL-3.0

Questions

How big is the VFD IV 18 PCB?

It measures 140 × 27 mm and has 2 copper layers, 1.6 mm thick.

What parts does the VFD IV 18 use?

42 parts, built around the ESP-07, DS3231MZ+, 2N7002K and CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the VFD IV 18 KiCad files?

From the pondahai/VFD_IV_18 repository on GitHub, at the commit this page was made from: the board is hardware/main_board/v1/main.kicad_pcb and its schematic hardware/display/v1/VFD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the VFD IV 18 design in my own project?

Its repository states no licence, so its author keeps all rights: ask pondahai before reusing the design.