Skip to the content

ESP8266

229 boards

KiCad boards from 145 GitHub repositories tagged “esp8266”, the most starred first; open any of them in PCBKit.

  • 2 layers42.9 × 18.5 mmEsp12-dht22, the printed circuit board in 3D

    Esp12-dht22

    hpbock/esp12-environment-sensor

    Environment sensor that is powered by a 18650 battery using a dht22 to sense temperature and humidity. Connectivity is provided wireless using an esp12 sleeping deeply most of the time.

    13 partsMIT
  • 2 layers53.3 × 33 mmEsp01s power board, the printed circuit board in 3D

    Esp01s power board

    idreamshen/esp01s-power-board

    ESP-01S 供电底板

    19 parts
  • 2 layers47.4 × 28.3 mm05 a radio, the printed circuit board in 3D

    05 a radio

    ItzzInfinity/FM-Radio-Using-ESP-12E-and-RDA5807M

    An FM radio receiver built using an ESP12E, interfaced with the RDA5807M module. Powered by a Li-Ion battery with a TP4056 charging module, amplified by a PAM8403, and output through a 10-watt speaker.

    15 partsMIT
  • 2 layers100 × 80 mmBombitapp, the printed circuit board in 3D

    Bombitapp

    luqas11/bombitapp

    Control and protection device for water pump engines.

    24 parts
  • 2 layers100 × 100 mmESP12E, the printed circuit board in 3D

    ESP12E

    Mohamed-U3/Pressure-measuring-and-control-Board

    This repository contains KiCad 9.0.2 schematics for a pressure‑control system built around an ESP‑12E module, dual precision pressure measurement channels, high‑side battery/adapter power path control, and isolated…

    129 partsMIT
  • 2 layers165.5 × 125.5 mmSender r3 external, the printed circuit board in 3D

    Sender r3 external

    p-keminer/iot-alarm-system

    IoT-Basis-Alarmanlage mit ESP8266-Nodes, Elegoo Uno R3, Raspberry Pi Zero 2 W, HMAC-SHA256-Absicherung, eigenen PCBs und 3D-gedruckten Gehäusen.

    17 parts
  • 2 layers170.2 × 108.6 mmIrrigator, the printed circuit board in 3D

    Irrigator

    peterbudai/irrigator

    Simple WiFi-enabled garden irrigation controller hardware

    45 partsMIT
  • 2 layers76 × 66 mmRadiator controller, the printed circuit board in 3D

    Radiator controller

    Plokkke/sauter-marapi-esphome

    ESPHome / Home Assistant pilot wire (fil pilote) controller for the Sauter Marapi tactile towel radiator — KiCad PCB, reverse engineering notes. Study phase, untested.

    19 parts
  • 2 layers160.5 × 63 mmCad files, the printed circuit board in 3D

    Cad files

    pozsarzs/mm6d-hw

    Remote controlled switching device

    62 parts
  • 2 layers52.8 × 63.5 mmMm7d, the printed circuit board in 3D

    Mm7d

    pozsarzs/mm7d-hw

    RH/T measuring device

    21 parts
  • 2 layers35.6 × 69.9 mmLEDs, the printed circuit board in 3D

    LEDs

    pta2002/esp-rgb

    An ESP8266-based RGB strip controller

    16 parts
  • 2 layers61 × 42.5 mmEsp summer sensor, the printed circuit board in 3D

    Esp summer sensor

    red-stripe/esp_summer_sensor

    A little board to monitor temperature and power consumption as I slowly melt

    20 parts
  • 2 layers271.8 × 185.4 mmSram redo, the printed circuit board in 3D

    Sram redo

    scabootssca/weatherstation

    Needs Src/shared/config.h made with this format:

    81 partsGPL-3.0
  • 2 layersWatering System, the printed circuit board in 3D

    Watering System

    ScottGibb/Watering-System

    Hardware schematics for the Outdoor ESPHome Watering System

    9 parts
  • 2 layers64.8 × 57.2 mmSmart Door Sensor, the printed circuit board in 3D

    Smart Door Sensor

    SeanP2001/Smart_Door_Sensor

    A sensor which sends an email notification whenever somebody opens a door.

    11 partsGPL-3.0
  • 2 layers71 × 74 mmParticle sensor pcb, the printed circuit board in 3D

    Particle sensor pcb

    squishykid/particles

    Particulate Matter Sensor Device

    46 parts
  • 2 layers66.5 × 49 mmRele esp12f, the printed circuit board in 3D

    Rele esp12f

    techmiguel/smartRele

    Single-channel Wi-Fi relay module based on the ESP-12F (ESP8266) for 110–120 VAC and loads up to 10 A. Open hardware in KiCad 10, ready for full assembly at JLCPCB.

    34 partsCERN-OHL-W-2.0
  • 2 layers116 × 26 mmDimLED, the printed circuit board in 3D

    DimLED

    tqlabs-in/dimled-mark-2

    ⚡ESP-01 based LED dimmer powered by ESPHome

    15 partsMIT
  • 4 layers55.6 × 77.4 mmPanel, the printed circuit board in 3D

    Panel

    vbartusevicius/esp-measurement-platform

    Modular ESP measurement platform with HomeAssistant and MQTT integration.

    83 parts
  • 10 layers70 × 50 mmSoilsense, the printed circuit board in 3D

    Soilsense

    wasylews/soilsense

    A low-power soil moisture and climate sensor on an ESP-01, powered by a single 18650 cell for an estimated six months. Custom PCB and a 3D-printed enclosure.

    29 parts
  • 2 layers64 × 46.5 mmPolariser drive, the printed circuit board in 3D

    Polariser drive

    WillMatthews/esp-i2c-titan

    nodemcu breakout board and software to drive an overview titan

    17 partsUnlicense
  • 2 layers80 × 49 mmNtfod, the printed circuit board in 3D

    Ntfod

    zaibatsutel/ntfod

    New Tricks For Old Dogs: a new modem for old friends.

    33 parts