

DimLED
⚡ESP-01 based LED dimmer powered by ESPHome
- Size
- 116 × 26 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 12
- Pads
- 57
- Tracks, vias
- 111, 65
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Sep 2025
- Updated
- 5 Feb 2026
Overview
DimLED is an open-source printed circuit board by tqlabs-in, from the tqlabs-in/dimled-mark-2 repository on GitHub, published under the MIT licence. It is a 2-layer board of 116 × 26 mm with 15 parts on 12 nets, routed with 111 tracks and 65 vias.
It is built around the ESP-01 and DC005. Its parts include 5 connectors, 3 ICs, 2 capacitors, 2 resistors and 2 switches. It belongs with the home automation and IoT boards and the ESP8266 boards of this library.
Main components
2README
README.mdDimLED Mark II
A simple led dimmer based on ESP-01 Module powered by esphome firmware.
Checkout iBOM for more details.
Renders ( Mark II.b )

Operating Power
Max Values:
- Max Voltage: 36VDC
- Max Current: 15A
- Max Power: 400W
Above specs are contstrained by XY-MOS PWM Trigger Module
Recommended Values:
- less than 10A at 12VDC
- less than 6A at 24VDC
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 1000u | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C2 |
| 1 | 100n | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C1 |
| 1 | Conn_01x03 | 0_Custom:PinHeader_1x03_L_Reverse_P2.54mm_Vertical | J5 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | DC005 | 0_Custom:DC005 | J2 |
| 1 | ESP-01 | 0_Custom:ESP-01 | U2 |
| 1 | IO BTN | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Input Power Terminal | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MP1584 Module | 0_Custom:MP1584-Module_22.1x16.8mm_Cutout_Mixed | U1 |
| 1 | Output LED Terminal | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | RST BTN | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | XY-MOS Module | 0_Custom:XY_MOS-Module_Mounted | U3 |
Similar boards
- 2 layers34.3 × 48.3 mm

- 4 layers100 × 80 mm

- 2 layers100 × 65.9 mm

FCI SAMD51-Universal Controller
libertathiest/FCI-SAMD51-Universal-Controller
SAMD51 handheld controller for FCI flow meters: KiCad hardware, PlatformIO firmware, FreeCAD enclosure
101 parts - 2 layers117.5 × 104.5 mm

Portero bot v2
Willis75/portero-bot-hardware
PCB design and ESP32 firmware for Portero Bot gate controller (Claustro4)
75 parts - 2 layers213 × 104 mm

- 2 layers100 × 100 mm

Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
273 parts43MIT - 2 layers50 × 100 mm

DMX CTRL
michar71/DMX_CTRL
DMX512 Controller for light installations based on Bluepill STM32F103 Board
46 parts12 - 2 layers68.6 × 95.3 mm

Questions
How big is the DimLED PCB?
It measures 116 × 26 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DimLED use?
15 parts, built around the ESP-01 and DC005. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DimLED KiCad files?
From the tqlabs-in/dimled-mark-2 repository on GitHub, at the commit this page was made from: the board is DimLED.kicad_pcb and its schematic DimLED.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DimLED design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).