Skip to the content

ESP32

1,360 boards

KiCad boards from 647 GitHub repositories tagged “esp32”, the most starred first; open any of them in PCBKit.

  • 2 layers91 × 137.4 mmProyecto Doom, the printed circuit board in 3D

    Proyecto Doom

    juanma0717/Proyecto-Doom

    Uno de los mejores juegos de la historia al alcance de tu mano

    18 parts
  • 2 layers160 × 110 mmPrepaid meter, the printed circuit board in 3D

    Prepaid meter

    kbssrikar7/esp32-energy-meter-pcb

    KiCad PCB design for an ESP32-based single-phase energy meter (ATM90E26 metering AFE) — DRC/ERC-clean, SPICE-validated, fab-ready

    80 parts
  • 2 layers76.2 × 62.9 mmController board, the printed circuit board in 3D

    Controller board

    kercle/microscopy

    A small microscope automation project with a nice UI and processing capabilities (for now in particular focus stacking).

    18 parts
  • 2 layers58 × 93 mmRF WiFi Bridge, the printed circuit board in 3D

    RF WiFi Bridge

    KHit6/RF-WiFi-Bridge

    A simple hardware design to bridge between 433 MHz devices and WiFi

    20 partsCERN-OHL-W-2.0
  • 2 layers80 × 60 mmAtmosmesh room, the printed circuit board in 3D

    Atmosmesh room

    konih/atmosmesh

    ESP32 indoor air-quality station: PM, climate, and a local OLED — headed for MQTT, Home Assistant, and Grafana.

    44 partsMIT
  • 2 layersAssignment Nano, the printed circuit board in 3D

    Assignment Nano

    KordbamTech/embedded-autonomy-pcb-navigation

    Custom KiCad PCB (ESP32 + Arduino Nano via I²C) with reactive Mbot maze-navigation in C++ — ELEC73151 Autonomous Intelligent Vehicles

    9 parts
  • 2 layersRfid attendance, the printed circuit board in 3D

    Rfid attendance

    Kowshik08004/ETE-320-project

    RFID-based attendance management system for educational institutions

    7 partsMIT
  • 2 layers60 × 69.1 mmNanovolt divider, the printed circuit board in 3D

    Nanovolt divider

    kuvychko/nanovolt-divider

    Programmable 1e-5/1e-6/1e-7 precision attenuator for nanovolt metrology: KiCad, ESP32 firmware, calibration method and results

    68 parts
  • 4 layers86 × 90 mmSc02 drive, the printed circuit board in 3D

    Sc02 drive

    KVR-CIBER/sc02-solar-hypercar

    SC-02 Solar Hypercar: 3D-printbare Le-Mans-racer op zonne-energie met Pi 4 + ESP32-S3, CadQuery-CAD en three.js-simulatie

    94 parts
  • 2 layers40 × 40 mmVibe lamp core v1, the printed circuit board in 3D

    Vibe lamp core v1

    laofahai/vibe-lamp

    Physical ESP32 status lamp for AI coding agents, with built-in Claude Code/Codex hooks and a generic event API.

    26 partsMIT
  • 2 layers78 × 99.5 mmPrecision AFE ESP32, the printed circuit board in 3D

    Precision AFE ESP32

    LemonAidLee/Precision-Analog-Front-End

    A highly precise, ±100 mV analog front-end (AFE) designed for the ESP32 and ADS1115. Features a 4-stage TL082 architecture including a Sallen-Key low-pass filter, delivering 9.4 µV/LSB resolution for precision data…

    29 partsCERN-OHL-P-2.0
  • 2 layers83.8 × 52.1 mmThetaProbe, the printed circuit board in 3D

    ThetaProbe

    Linoprit/ThetaMon3

    Measures temperatures with several DS1820 sensors and controlls a heater.

    15 partsGPL-3.0
  • 4 layers45.8 × 46.4 mmTotem, the printed circuit board in 3D

    Totem

    ljagiello/totem-compass

    Independent reverse-engineering documentation of the Totem Compass ESP32 + MicroPython firmware (v5.0.2): image/memory map, the 96 frozen modules, the 2.4 GHz protocols (BLE, ESP-NOW mesh, WiFi OTA), and a custom-client…

    144 partsApache-2.0
  • 2 layers70 × 60 mmRtt, the printed circuit board in 3D

    Rtt

    LMJesusGG/Rin-Tin-Tin-RTT-

    Battlebot tipo drum spinner inspirado en el Minotaur.

    15 partsMIT
  • 2 layers142.2 × 105.2 mmModulo IO Seminario, the printed circuit board in 3D

    Modulo IO Seminario

    lucas-vidmar/seminario-modulo-io

    Proyecto de Módulo IO para la materia Seminario de Ing. Electrónica UADE

    84 parts
  • 2 layers60 × 80 mmUrine monitor, the printed circuit board in 3D

    Urine monitor

    lzbgt/lora-weight-device

    LoRaWAN hospital monitoring device concept with paid embedded IoT bring-up review support

    29 parts
  • 4 layers60 × 120 mmTheoros, the printed circuit board in 3D

    Theoros

    Majorwhiskey/gps-lora

    Theoros is a USB-C GPS logger and LoRa tracker built on the ESP32-S3. It logs 1 Hz u-blox M10 fixes to microSD, shows status on an OLED and sends AES-128-CCM encrypted position over 868 MHz LoRa.

    88 partsCERN-OHL-P-2.0
  • 2 layers161.2 × 117.9 mmControl de panel, the printed circuit board in 3D

    Control de panel

    martincrespo77/Paneles-solares-pcb-esp32

    Seguidor solar de 2 ejes con ESP32: firmware PlatformIO y PCB en KiCad

    35 parts
  • 4 layers99.6 × 55.8 mmEsp32-sensor board, the printed circuit board in 3D

    Esp32-sensor board

    marwantm/esp32-sensor-board

    ESP32-C3 IoT sensor node with USB-C power path management — KiCad PCB design project

    86 parts
  • 4 layers82 × 94 mmESP32 ETH Panel, the printed circuit board in 3D

    ESP32 ETH Panel

    mede-erik/ESP32_ETH_BORD

    A development board based on ESP32-WROOM-32E and LAN8720A controller, designed to ensure stable and high-performance Ethernet connectivity in IoT applications and integrations with Home Assistant. (WIP)

    120 partsMIT
  • 2 layers80.3 × 59.4 mmPlantWatering, the printed circuit board in 3D

    PlantWatering

    Meltwin/PlantWatering

    Automated plant watering system

    26 partsMIT
  • 2 layers35 × 55 mmCoral ir, the printed circuit board in 3D

    Coral ir

    mineiwik/coral-ir

    Smart infrared transmitter

    31 partsMIT
  • 4 layers46.5 × 17.4 mmStick, the printed circuit board in 3D

    Stick

    mkalmousli/tandem-stick

    [WIP] Open hardware concept: button-free wireless USB sticks. 3D explorer, plan, test lab, fab files.

    12 partsMIT