2 layers80 × 30 mm
Embedded
584 boardsKiCad boards from 221 GitHub repositories tagged “embedded”, the most starred first; open any of them in PCBKit.
- 2 layers66.3 × 53.2 mm
EEW5
mribble/ElectricEelWheel5
The Electric Eel Wheel 5 is an electric spinning wheel that converts fiber (an example being sheep's wool) into yarn. This site contains the open source files for this project.
61 parts14 - 2 layers59.7 × 59.7 mm
Ferro dactyl
wose/ferro-dactyl
A BluePill (STM32F103) based Dactyl-Manuform build with keyberon powered firmware written in Rust
22 parts14Apache-2.0 - 2 layers60 × 40 mm
Touch n drink
zargony/touch-n-drink
Hardware and firmware for cashless payment device for cold drinks at the aeroclub at EDLH
13 parts14EUPL-1.2 - 2 layers
FlightPanel-01
arn-c0de/ATMEGA-ButtonPanel
ATmega32U4 flight panel with 16-ch multiplexer, rotary encoder, and 19+ inputs.
29 parts12 - 2 layers35 × 22 mm
10 kicad export
NijoP/pcbflow
PCB Flow — autonomous, AI-assisted PCB design workflow that takes a hardware project from requirements to manufacturing-ready files.
8 parts12MIT - 2 layers70 × 15.5 mm
- 2 layers80 × 60 mm
EnvMonitor
kennySzhucheng/EnvMonitor
🌡️ 智能环境监测站 | STM32F103C8T6 + FreeRTOS + ESP8266 | 温湿度/光照/测距/OLED菜单/ThingSpeak上云 | 从裸机到RTOS到KiCad PCB全流程
27 parts10 - 2 layers72 × 22 mm
Cheating calc
ChinesePrince07/TI-84-GPT-HACK
A mod that gives your TI-84 Wi-Fi, ChatGPT, and the ability to disappoint your math teacher in ways never thought possible. Original idea by Chromalock, reconstructed by myself after his repo is taken down.
8 parts9GPL-3.0 - 2 layers44.4 × 29.3 mm
ElectronicTriggerUnit
aNThiCu/AirsoftETU
The code for a airsoft MOSFET board that includes the trigger , active break mode and semi-auto,full-auto detection.
36 parts8GPL-3.0 - 2 layers23 × 19 mm
- 4 layers133.9 × 165.1 mm
Main VCO board
JordanAceto/micro_ox
Monosynth with analog signal path and digital controls. SSI2130 VCOs and SSI2140 VCF.
295 parts8CC-BY-4.0 - 2 layers125 × 72 mm
Simut PCB
angeloINTJ/simut
Sistema Integrado de Monitoramento Universal e Telemetria: open-source firmware for the Raspberry Pi Pico W and Pico 2 W.
27 parts7MIT - 2 layers85.6 × 68.1 mm
- 4 layers30.7 × 51.7 mm
SmallSpeedController
h0lad/MiniSpeedController
MiniSpeedController is a dual DC motor controller based on a WCH CH32V003F RISC-V Microcontroller and two TI DRV8837DSGR. It consumes two encoder inputs and is controllable using an USART via simple TLV commands.
37 parts7CERN-OHL-S-2.0 - 2 layers94 × 100 mm
Robocar unified integrated carrier
laurigates/mcu-tinkering-lab
This repository contains projects for various embedded platforms (ESP32, Arduino, STM32).
98 parts7MIT - 4 layers14 × 32.7 mm
- 2 layers200 × 75 mm
0x10pb
vaeinoe/0x10pb
MIDI controller with 16 pots x 4 banks, USB-C, TRS and battery powering option
32 parts7MIT - 4 layers35.4 × 21.6 mm
ESP32-C3-V4
Ans1S/esp32-c3-iot-sensor-board
Open-source ESP32-C3 platform for ultra-low-power environmental sensor networks powered by recycled LiPo cells. Includes KiCad PCB, PlatformIO firmware (ESP-NOW + ThingSpeak), BME280/BME680 support, deep-sleep…
57 parts6MIT - 4 layers78.5 × 95 mm
- 2 layers85 × 50 mm
DataAcquisitionUnit
RobertGawron/HardwareDataLogger
Data logger shield based on STM32+ESP32. Has: LCD, keyboard, WIFi, UART and SD card for data storage. Input is as pulse counter and UART communication.
70 parts6MIT - 2 layers76.2 × 50.8 mm
- 2 layers225 × 63.5 mm
- 2 layers93.6 × 102.8 mm
Mote hardware
empriselab/mote
A low cost, high confidence mobile robot optimized for education.
75 parts5MIT