2 layers83.3 × 65.3 mm
SimonShield
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
46 parts14kMIT
2 layers59.7 × 59.7 mm
Ferro dactyl
wose/ferro-dactyl14A BluePill (STM32F103) based Dactyl-Manuform build with keyberon powered firmware written in Rust
- Size
- 59.7 × 59.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 45
- Pads
- 96
- Tracks, vias
- 108, 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Jul 2020
- Updated
- 16 Jun 2022
Overview
Ferro dactyl is an open-source printed circuit board by wose, from the wose/ferro-dactyl repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 59.7 × 59.7 mm with 22 parts on 45 nets, routed with 108 tracks and 6 vias.
It is built around the BC547. Its parts include 6 resistors, 5 diodes, 4 connectors and 1 transistor. It belongs with the keyboards and input boards of this library.
Main components
1README
README.mdFerro Dactyl
A BluePill (STM32F103) based Dactyl-Manuform build with keyberon powered firmware written in Rust.
Layout
I'm using a AdNW based Layout. This is a work in progress.
You can take the layout definition from the layout folder and play with it over at Keyboard Layout Editor. Or use this link.
Hardware
The STLs are generated using 20lives Dactyl-Manuform fork. I'm using a 5x6 version.
Firmware
The firmware uses the keyberon library.
curl https://sh.rustup.rs -sSf | sh
rustup target add thumbv7m-none-eabi
sudo apt-get install gdb-arm-none-eabi openocd
git clone https://github.com/wose/ferro-dactyl.git
cd ferro-dactyl
# connect ST-Link v2 to the blue pill and the computer
# openocd in another terminal
cargo run --releaseSee keyberons building instructions for more info.
License
Licensed under either of
- Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
Contribution
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 180 | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R2, R3, R4, R5, R6 |
| 5 | LED | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | D1, D2, D3, D4, D5 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R1 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_HandSolder | Q1 |
| 1 | BluePill_1 | YAAJ_STM32:YAAJ_BluePill_SWD_1 | BP?1 |
| 1 | Columns | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J1 |
| 1 | Left/Right | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | Rows | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | SSD 1306 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | UART | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
The 18 most common of 22 parts.
Questions
How big is the Ferro dactyl PCB?
It measures 59.7 × 59.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ferro dactyl use?
22 parts, built around the BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ferro dactyl KiCad files?
From the wose/ferro-dactyl repository on GitHub, at the commit this page was made from: the board is kicad/ferro-dactyl.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ferro dactyl design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers56 × 65 mm
SeaTalk1
dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.
24 parts2.4kMIT - 2 layers132.1 × 45.7 mm
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers99.1 × 99.7 mm
RC6502 General Video Adapter
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
80 parts193GPL-3.0 - 2 layers55.9 × 38.6 mm
- 2 layers99.9 × 70 mm
- 2 layers40 × 100 mm
Back pcb
ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!
118 parts148GPL-3.0 - 2 layers100 × 100 mm
