2 layers58.4 × 69.9 mm
Atmega isp
TimGoll/pcb_atmega328pb
The board's design is heavily based on the design of the Arduino Uno. All the USB communication stuff was removed. The board is therefore reduced to its bare minimum.
27 parts
Electronics
1,429 boardsKiCad boards from 602 GitHub repositories tagged “electronics”, the most starred first; open any of them in PCBKit.
- 2 layers40.9 × 24.1 mm
- 2 layers30.5 × 42.4 mm
- 2 layers29.8 × 36.3 mm
- 6 layers30 × 50 mm
- 2 layers24.2 × 33.9 mm
TORICAberry Pi Bico(3rd Edition)
torica-org/26th_PCB_AirData
メイン兼エアデータセンサー部（今後、エアデータと言います）のリポジトリです。
47 parts - 2 layers162.6 × 97.3 mm
Memory subsystem
TSJR/logic-analyzer
TTL logic analyzer built from 74xx logic and LED dot matrix display
73 parts - 2 layers154.3 × 119.4 mm
Iot curtain and light
tzf230201/iot_curtain_and_light
An IoT device for controlling curtains, main lighting and an RGB ambient light, using an ESP8266 as the main controller and controllable via Telegram.
27 parts - 2 layers90 × 43 mm
- 2 layers75.2 × 157.5 mm
TrafficLight
uniqueacevedo/KiCad-Mini-Projects
A collection of small PCB design exercises created to strengthen my understanding of KiCad, circuit design, and the hardware development workflow.
28 partsMIT - 2 layers56.6 × 27.6 mm
MSPMO PROJECt
Varsha123-glitch/MSPM0G3507-Development-Board
Custom 2-layer MSPM0G3507 development board designed in KiCad 9 with USB Type-C, CH340E USB-UART, SWD programming interface, and LIS2DH accelerometer.
38 parts - 2 layers34.7 × 36.4 mm
Noise generator
vikram026-cmd/Random-noise-generator
Design and simulation of a Random Noise Generator using LTspice, followed by 2-layer PCB design in KiCad.
23 parts - 2 layers138.5 × 36.5 mm
5V Regulated Power Supply PCB
vishalbodkhe/5V-Regulated-Power-Supply-PCB
12V DC to 5V regulated power supply PCB designed using KiCad with protection, filtering, DRC verification and Gerber files.
11 parts - 2 layers42 × 18 mm
555-Timer LED Blinker PCB
vishalbodkhe/555-Timer-LED-Blinker-PCB
555 Timer LED Blinker PCB designed using KiCad
8 parts - 2 layers100 × 90.5 mm
ESP32-Environmental Monitoring PCB
vishalbodkhe/ESP32-Environmental-Monitoring-PCB
ESP32-based environmental monitoring PCB designed in KiCad with DHT11, LDR, OLED, custom routing, GND zone and manufacturing-ready Gerber files.
19 parts - 2 layers53 × 23 mm
LDR Automatic Light Control PCB
vishalbodkhe/LDR-Automatic-Light-Control-PCB
LDR-based automatic light control system with custom KiCad PCB design, DRC verification, Gerber files and 3D visualization.
8 parts - 2 layers
- 2 layers245 × 163 mm
EMF SENSOR PANEL
vul-os/zana
Zana — open-hardware for the physical world: robot mowers, security & cleaning bots, sensor nodes and cameras that plug into any control plane. Build them yourself. FreeCAD + KiCad.
360 partsMIT - 2 layers24 × 27 mm
Usb dongle stand
wb1016/usb-dongle-stand
stand that uses a USB-C connector, for mechanical connection, to use NRF Supermini, ESP32, Pi Pico W, etc as a dongle.
15 partsCC0-1.0 - 2 layers60.8 × 90.3 mm
PI make
webertom6/pi-protobot
Mobile robot capable of autonomously navigating while avoiding obstacles and dead ends
49 partsMIT - 4 layers46 × 69 mm
- 2 layers120 × 80 mm
- 2 layers148.6 × 82 mm
Main dj filter fx
yminp/dj-filter-fx
A voltage-controlled DJ filter unit with LFO-like envelope function
164 parts - 4 layers135.2 × 73.1 mm
Motor Health Monitoring PCB
YUKESH0620/Motor_Health_Monitoring_8051_PCB
Motor Health Monitoring PCB designed using KiCad. This repository contains the complete hardware design including schematic, PCB layout, custom libraries, manufacturing files, and design reports.
112 partsMIT