KiCad boards from 77 GitHub repositories tagged “cpp”, the most starred first; open any of them in PCBKit.
Aliou8/SAHEL-SPECTRA-RF
CubeSat for educational purposes. It is based on an STM32H7 MCU for data handling and uses two CC1125 radios for communication. The software is developed using a Zephyr-like RTOS.
eemreinceer/Smart_Safe
AI-powered IoT security system with ESP32-CAM, custom PCB design (KiCad), 3D enclosure (Fusion 360), Firebase cloud sync, and React dashboard. End-to-end embedded engineering project.
francesco-dorati/smart-irrigation
🌱 Autonomous Plant Watering System -- modular system for smart plant watering in complete autonomy
giorossi91/livello_serbatoio
This project realizes a simple device to monitor the water level in a tank.
mcbronkowitch/fireflow
FireFlow — a modulation-first ambient groovebox: the modulation system is the instrument, not a layer on top of it. Five independent lanes per part driving a synth, granular, wavetable, resonator or bucket-brigade deck.
pranavpai/Autonomous-RC-Car-AI-Project
Autonomous RC car with cone-based lane keeping, ToF obstacle avoidance, and software-in-the-loop simulation using ROS2
syauqibilfaqih/Pullback-Device
Low-cost open source pullback device for varicose vein surgery
bazauto/PicoDCC
DCC command station firmware for the Raspberry Pi Pico 2 — PIO-generated track signal, partial DCC-EX protocol for JMRI, LVGL touchscreen UI
dsorensen228/sherman
Desktop robot project with C++ personality and display runtimes, Python hardware services, Pico 2 firmware, and PCB and enclosure design.
farazaleboyeh/led-matrix
Graphics driver & hardware design for a custom-built display that shows streamed music artwork.
FRC-1721/AccidentCounter
A digital sign hung in the build space advertising days without incident
GiovanniRaseraF/DroneTheory
Tests, Theory, Development of Drone HW and SW + Vespin 1 Hardware
jaszczurtd/Ford-Mondeo-MK-DPF-Tracker
Utility to track and visualise DPF regeneration cycles
Jerey/weatherstation-client
Weatherstation publishing temperature and humidity values via MQTT broadcasts.
Joe-BN/MacroEins
A customizable macropad powered by the Esp32 c3 microcontroller.
joseguerra3000/temperature-module
Temperature module compatible with arduino and digilent cerebot. Useful for calibrating thermoresistors. Able to use three temperature sensors at the same time (LM35, AD22103, Thermoresistor).
Kampi/SensorHub
Solar-powered, low energy environment sensor node with WiFi interface.
MahmoudBasio/DSP-Guitar-MultiFX
Open-source modular real-time embedded DSP guitar multi-effects platform based on Teensy 4.1, with custom hardware, C++ firmware, and real-time control.