
DriverUnit
syauqibilfaqih/Pullback-Device
Low-cost open source pullback device for varicose vein surgery

Low-cost open source pullback device for varicose vein surgery
ESP32 is an open-source printed circuit board by syauqibilfaqih, from the syauqibilfaqih/Pullback-Device repository on GitHub, published under the MIT licence. It is a 2-layer board of 47 × 70.5 mm with 14 parts on 29 nets, routed with 89 tracks and 0 vias.
It belongs with the ESP32 boards of this library.
This is an overview of a low-cost open source pullback device for varicose vein surgery.
Look at the video attached bellow: https://youtu.be/Uo2tgYB1XSM
git clone https://github.com/syauqibilfaqih/Pullback-Device.gitThen, go to the folder "SourceCode". Make sure that you already have PlatformIO on your Visual Studio Code.
I realized that this readme still only contained short information right now. Should you have any question, don't hesitate to contact me at alisyauqibilfaqih@gmail.com
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Driver | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | Driver |
| 1 | ESP32-DEVKIT-V1 | ESP32:MODULE_ESP32_DEVKIT_V1 | U1 |
| 1 | EncUI | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | EncUI |
| 1 | Oled | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | OLED |
| 1 | PowerSupply | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | 5V |
| 1 | Rotary | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | Rotary |
| 1 | SupplyDriver | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | 5V |
| 1 | SupplyEncUI | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | 5V |
| 1 | SupplyOled | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | 5V |
| 1 | SupplyRotary | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | 5V |
The 10 most common of 14 parts.

syauqibilfaqih/Pullback-Device
Low-cost open source pullback device for varicose vein surgery

syauqibilfaqih/Pullback-Device
Low-cost open source pullback device for varicose vein surgery

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 47 × 70.5 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the syauqibilfaqih/Pullback-Device repository on GitHub, at the commit this page was made from: the board is Electrical/ESP32/ESP32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).