Skip to the content

Amiga

64 boards

KiCad boards from 47 GitHub repositories tagged “amiga”, the most starred first; open any of them in PCBKit.

  • 2 layers51.8 × 26.4 mmOpenAmigaFourPlayerAdapter, the printed circuit board in 3D

    OpenAmigaFourPlayerAdapter

    SukkoPera/OpenAmigaFourPlayerAdapter

    Connect up to four joysticks to your Amiga!

    6 parts14
  • 2 layers50 × 50 mmPlipUltimate, the printed circuit board in 3D

    PlipUltimate

    tehKaiN/plipUltimate

    Network interface & SD card reader for Classic Amigas

    51 parts13GPL-2.0
  • 4 layers65.4 × 111.6 mmGinger, the printed circuit board in 3D

    Ginger

    mrehkopf/Ginger

    Socket shift, CPU switch, Clockports for Amiga mITX "Denise"

    30 parts12
  • 4 layers110 × 55 mmPhloppy 0, the printed circuit board in 3D

    Phloppy 0

    piotr-wiszowaty/phloppy_0

    Commodore Amiga floppy drive emulator

    85 parts12GPL-3.0
  • 4 layers175.6 × 122.1 mmA4092, the printed circuit board in 3D

    A4092

    A4091/A4092

    A4092 SCSI-2 Host Controller

    94 parts10
  • 2 layers22 × 34 mmKey tap88, the printed circuit board in 3D

    Key tap88

    jmA500/Key-Tap

    Key-Tap. Use keyboard hotkeys to configure internal hardware extensions in the Amiga 500.

    13 parts10GPL-2.0
  • 4 layers82.6 × 83.8 mmA520 ACCEL RAM IDE, the printed circuit board in 3D

    A520 ACCEL RAM IDE

    PR77/A520_ACCEL_RAM_IDE

    Amiga 500 in socket 68020 Accelerator, FastRAM and IDE Interface

    46 parts10AGPL-3.0
  • 2 layers53 × 24 mmFloppyswap, the printed circuit board in 3D

    Floppyswap

    jmA500/amiga-goodies

    A few simple AMIGA related PCBs.

    10 parts9GPL-2.0
  • 2 layers21.2 × 13.2 mmNovOSC, the printed circuit board in 3D

    NovOSC

    reinauer/novOSC

    DIP14/DIP8 adapter for SMD oscillators in retro computer systems

    5 parts9
  • 2 layers61.8 × 21.6 mmUSBQuadMouse, the printed circuit board in 3D

    USBQuadMouse

    PR77/CH554_USBQuadMouseKeyboard

    CH554 based USB to Quadrature Mouse and Keyboard Interface

    24 parts8MIT
  • 2 layers66.4 × 56 mmDualjoy, the printed circuit board in 3D

    Dualjoy

    ansiwen/dualjoy

    Retro joystick USB adapter

    7 parts7MIT
  • 2 layers25.7 × 76.6 mmOpenKickstartSwitcher, the printed circuit board in 3D

    OpenKickstartSwitcher

    SukkoPera/OpenKickstartSwitcherCDTV

    Open Hardware Kickstart Switcher for the Commodore CDTV

    12 parts7
  • 2 layers31.9 × 30.5 mmStm rtc, the printed circuit board in 3D

    Stm rtc

    AmigaPorts/stm_rtc

    STM32 emulator of msm6264b RTC for Amiga computers

    15 parts6MPL-2.0
  • 2 layers125.7 × 33 mmSRAM Board 2MB, the printed circuit board in 3D

    SRAM Board 2MB

    kr239/A500-SRAM-Board

    Replace the old 44256 DRAM chips on your A500 with newer SRAM memory

    47 parts6GPL-2.0
  • 2 layers34.3 × 43.9 mmClockPort FPC-4x Clover, the printed circuit board in 3D

    ClockPort FPC-4x Clover

    mrehkopf/ClockPort-FPC-Adapters

    Breakout boards for 30-pin FPC clock port expansions

    8 parts4
  • 2 layers66.1 × 17.8 mmPaula Int Adapter, the printed circuit board in 3D

    Paula Int Adapter

    reinauer/Paula-Int-Adapter

    Cheap "Action Replay" clone for Amiga 500/2000

    7 parts4
  • 2 layers60.2 × 80.8 mmPAL-2-PSIO v0.1, the printed circuit board in 3D

    PAL-2-PSIO v0.1

    venice1200/Retro

    Projects for older Retro Style Systems

    27 parts4MIT
  • 2 layers100 × 66 mmPhram 1, the printed circuit board in 3D

    Phram 1

    piotr-wiszowaty/phram_1

    phram\1 is a Commodore Amiga A600 extension - 8 MB of fast RAM.

    60 parts3GPL-3.0
  • 2 layers64.3 × 14.5 mmA1200, the printed circuit board in 3D

    A1200

    bodgit/A1200-HxC

    Simple circuit to present the internal HxC buttons outside the A1200 case

    8 parts2
  • 2 layers50.5 × 74 mmDenise interposer, the printed circuit board in 3D

    Denise interposer

    geekychris/amiga_flickerfixer_fpga

    This project is an FPGA-based solution for the Commodore Amiga, specifically designed to eliminate the flicker issue in its native video output.

    6 parts2
  • 4 layers97.4 × 94.7 mmReClockator-500, the printed circuit board in 3D

    ReClockator-500

    mrehkopf/ReClockator-500

    Changes the orientation of a 68000 DIP CPU, adds 4 clock ports

    20 parts2GPL-3.0
  • 2 layers93.3 × 38 mmRt65b breakout, the printed circuit board in 3D

    Rt65b breakout

    blark/rt65b_power_module

    Mean well RT65-B IEC C13 switched power entry and DC DIN-7 output module

    12 parts1
  • 2 layers82.6 × 177 mmTeensyNumPadKicad, the printed circuit board in 3D

    TeensyNumPadKicad

    grahamshaw1972/TeensyNumPad

    Amiga Numpad using Teensy++ 2.0 micro controller

    56 partsGPL-3.0
  • 2 layers37.3 × 27 mmTICK, the printed circuit board in 3D

    TICK

    jasonsbeer/Amiga-2000-EATX

    An Amiga 2000 PCB in the EATX form factor.

    10 parts200GPL-3.0