
LCD OLinuXino-5TS Rev.B
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

Amiga Numpad using Teensy++ 2.0 micro controller
TeensyNumPadKicad is an open-source printed circuit board by grahamshaw1972, from the grahamshaw1972/TeensyNumPad repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 82.6 × 177 mm with 56 parts on 82 nets, routed with 465 tracks and 0 vias.
Its parts include 24 diodes, 9 resistors, 1 IC and 1 connector. It belongs with the retro computing and games and keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Amiga Layout Numpad using Teensy++ 2.0 micro controller. The V1.3 board looks like this when completed and populated with keycaps:

| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | D_Small | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2 |
| 16 | MX-NoLED | MX_Alps_Hybrid:MX-1U-NoLED | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8, MX9, MX10, MX11, MX12, MX13, MX14, MX15, MX17 |
| 9 | 150 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 6 | LED | LED_THT:LED_D3.0mm | LED1, LED2, LED3, LED4, LED5, LED6 |
| 3 | MX-LED | MX_Alps_Hybrid:MX-1.25U | MX19, MX20, MX21 |
| 2 | MX-NoLED | MX_Alps_Hybrid:MX-2U-NoLED | MX16, MX18 |
| 1 | KCDX-5S-S2 | SamacSys_Parts:KCDX5SS2 | J1 |
| 1 | Teensy++2.0_(C) | teensy:Teensy2.0++ | U1 |

OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



GEIGEIGEIST/KLOTZ
KLOTZ is 34 keys column-staggered split keyboard. It uses an encoder and three status LEDs on each side.

ergonautkb/one
Ergonaut One is an open-source ergonomic wireless split mechanical keyboard designed by Ergonaut Keyboards.

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54
It measures 82.6 × 177 mm and has 2 copper layers, 1.6 mm thick.
56 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the grahamshaw1972/TeensyNumPad repository on GitHub, at the commit this page was made from: the board is teensyNumPadKicad/teensyNumPadKicad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).