Skip to the content
PCBKitNew board

Amiga

64 boards

KiCad boards from 47 GitHub repositories tagged “amiga”, the most starred first; open any of them in PCBKit.

  • 2 layers365.8 × 254 mmRaemixx500, the printed circuit board in 3D

    Raemixx500

    SukkoPera/Raemixx500

    Open Hardware Remake of the Commodore Amiga 500+ Mainboard

    372 parts316
  • 4 layers304.8 × 330.2 mm2000ATX, the printed circuit board in 3D

    2000ATX

    jasonsbeer/Amiga-2000-EATX

    An Amiga 2000 PCB in the EATX form factor.

    614 parts200GPL-3.0
  • 2 layers63.3 × 57.2 mmRam Tester, the printed circuit board in 3D

    Ram Tester

    tops4u/Ram-Tester

    Ram Tester for vintage CBM Computer RAM Chips

    42 parts118
  • 2 layers100 × 71.5 mmOpenAmiga500FastRamExpansion, the printed circuit board in 3D

    OpenAmiga500FastRamExpansion

    SukkoPera/OpenAmiga500FastRamExpansion

    4/8 MB Fast RAM Expansion for the Commodore Amiga 500

    35 parts88
  • 2 layers28.4 × 76.5 mmOpenKickstartSwitcher, the printed circuit board in 3D

    OpenKickstartSwitcher

    SukkoPera/OpenKickstartSwitcher

    Open Hardware Kickstart Switcher for Amiga Computers

    14 parts81
  • 4 layers318.4 × 124.5 mmN2360, the printed circuit board in 3D

    N2360

    jasonsbeer/Amiga-N2630

    A re-imagining of the Amiga A2630 processor card.

    248 parts69
  • 2 layers50.3 × 64.8 mmDenise adapter, the printed circuit board in 3D

    Denise adapter

    niklasekstrom/flickerfixer

    An open source flicker fixer for Amiga 500/2000

    9 parts69CC0-1.0
  • 2 layers58.9 × 44.2 mmOpenPSX2AmigaPadAdapter, the printed circuit board in 3D

    OpenPSX2AmigaPadAdapter

    SukkoPera/OpenPSX2AmigaPadAdapter

    Playstation to Commodore Amiga/CD32 Controller Adapter

    43 parts69
  • 2 layers90 × 60 mmGotek Floppy Disk Emulator V2, the printed circuit board in 3D

    Gotek Floppy Disk Emulator V2

    RichardRozehnal/Gotek-Floppy-Disk-Emulator-V2

    Floppy disk emulator for old computers and machines, Amiga, Atari ST, etc.

    66 parts66GPL-3.0
  • 2 layers114 × 96 mmARIII, the printed circuit board in 3D

    ARIII

    na103/ar3

    Amiga Action Replay III remake

    34 parts64
  • 4 layers38 × 38 mmReSDMAC, the printed circuit board in 3D

    ReSDMAC

    mbtaylor1982/ReSDMAC

    Verilog code to replace the Commodore SDMAC found in the A3000

    36 parts51CC-BY-SA-4.0
  • 2 layers74.4 × 72.5 mmOpenAmiga600FastRamExpansion, the printed circuit board in 3D

    OpenAmiga600FastRamExpansion

    SukkoPera/OpenAmiga600FastRamExpansion

    4 MB Fast RAM Expansion for the Commodore Amiga 600

    27 parts47
  • 4 layers99.4 × 34.5 mmA600 ACCEL RAM, the printed circuit board in 3D

    A600 ACCEL RAM

    PR77/A600_ACCEL_RAM

    Amiga 600 Accelerator And RAM Expansion

    33 parts35GPL-3.0
  • 4 layers39.5 × 21 mmScartPCB, the printed circuit board in 3D

    ScartPCB

    screwbreaker/ScartPCB

    A little PCB to buld a SCART cable for console and old computers

    55 parts33
  • 2 layers41.3 × 51.8 mmA500plus chipram expansion, the printed circuit board in 3D

    A500plus chipram expansion

    blark/a500plus-chipram-expansion

    A 1MB chip RAM expansion for the A500+

    13 parts32
  • 2 layers25.1 × 52.3 mmOpenAmigaDriveSwitcher, the printed circuit board in 3D

    OpenAmigaDriveSwitcher

    SukkoPera/OpenAmigaDriveSwitcher

    Open Hardware Floppy Drive Swapper for Amiga Computers

    10 parts29
  • 2 layers46.8 × 111 mmA500hdd, the printed circuit board in 3D

    A500hdd

    AmigaPorts/a500hdd

    Inexpensive A500 hard disk interface

    108 parts28MPL-2.0
  • 2 layers44.5 × 35.8 mmOpenA1200RTC, the printed circuit board in 3D

    OpenA1200RTC

    screwbreaker/OpenA1200RTC

    Open Hardware RTC module for the Amiga 1200.

    14 parts27
  • 2 layers111.6 × 37.5 mmOpenAmiga2000CoproAdapter, the printed circuit board in 3D

    OpenAmiga2000CoproAdapter

    SukkoPera/OpenAmiga2000CoproAdapter

    Move your Amiga 2000 CPU to the Coprocessor slot!

    19 parts27
  • 2 layers28.2 × 28.2 mmOpenAmigaMouseTrigger, the printed circuit board in 3D

    OpenAmigaMouseTrigger

    SukkoPera/OpenAmigaMouseTrigger

    Control Amiga add-on boards through mouse buttons

    11 parts27
  • 2 layers20.6 × 57.4 mmAmiga Boot Selector, the printed circuit board in 3D

    Amiga Boot Selector

    reinauer/Amiga-Boot-Selector

    This is a Floppy Switcher for the Amiga 500/2000. It allows you to switch DF0/DF1, making it possible to boot from either a Gotek drive or the internal floppy drive. without relying on AmigaOS.

    7 parts18
  • 2 layers30.3 × 35.8 mmAtkDongle, the printed circuit board in 3D

    AtkDongle

    SukkoPera/AtkDongle

    Troubleshoot parallel and serial ports on Amiga Computers

    16 parts17
  • 2 layers59.2 × 59.2 mmBuffered IDE2CF adapter Rev 1, the printed circuit board in 3D

    Buffered IDE2CF adapter Rev 1

    RetroNynjah/Buffered-IDE2CF-adapter

    Buffered IDE2CF adapter for Amiga 1200, TF1260 and others

    26 parts15GPL-3.0