2 layers114 × 104 mm
2 layers114 × 96 mm
ARIII
na103/ar364Amiga Action Replay III remake
- Size
- 114 × 96 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 124
- Pads
- 376
- Tracks, vias
- 1,776, 431
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Jul 2024
- Updated
- 13 Oct 2024
Overview
ARIII is an open-source printed circuit board by na103, from the na103/ar3 repository on GitHub. It is a 2-layer board of 114 × 96 mm with 34 parts on 124 nets, routed with 1,776 tracks and 431 vias.
It is built around the 74LS74PC, MC1455BD and ZVP2106A, with the 3386F-1-103LF and ECC43DCAI-S189 among its other parts. Its parts include 11 ICs, 7 resistors, 6 capacitors, 3 diodes and 2 transistors. It belongs with the retro computing and games boards and the FPGA and CPLD boards of this library.
Main components
5
74LS74PC
DIP-140ns 0℃~+70℃ 1 2 20MHz 3.5pF 35ns@5V,50pF 4.5ns 4.75V~5.25V 400uA 74LS Series 8mA 8mA Asynchronous Complementary D-Type Rising Edge Set and Reset DIP-14 Flip FlopsTexas InstrumentsFlip Flops
MC1455BD
SOIC-8-40℃~+85℃ 4.5V~16V SOIC-8 Timers / Counters ROHSonsemiTimers / Counters
ZVP2106A
TO-92-55℃~+150℃ 1 P-Channel 1.5V 100pF 20pF 280mA 5Ω@10V 60V 700mW TO-92 MOSFETs ROHSDiodes IncorporatedMOSFETs3386F-1-103LF
插件-3P,9.5x9.5mm1 10kΩ 500mW ±10% ±100ppm/℃ 插件-3P,9.5x9.5mm Potentiometers, Variable Resistors ROHSBournsPotentiometers & Variable ResistorsECC43DCAI-S189
弯插,P=2.54mm-65℃~+125℃ 2.54mm 86P Gold Phosphor bronze Right Angle 弯插,P=2.54mm Edgeboard Connectors ROHSSullins Connector SolutionsEdgeboard Connectors
README
README.mdAmiga Action Replay III remake
This repository contains the reverse engineering schematic for the Amiga Action Replay III and everything needed to build it.
Bill of materials
| Qt. | Description | Designator | Mouser part | Note |
|---|---|---|---|---|
| 6 | Resistor 1K | R1-R4, R6, R7 | CRCW12061K00FKEA | |
| 1 | Resistor 4.7K | R5 | CRCW12064K70FKEA | |
| 1 | Cap. 10uF 16V | C1 | EEA-FC1E100H | |
| 4 | Cap. 100nf | C2-C5 | C1206C104K5RAC7867 | |
| 1 | Cap. 1uF 63V | C6 | ESS105M050AB2AA | |
| 5 | GAL16V8 | U1-U5 | ATF16V8BQL-15JU | |
| 5 | PLCC 20 POS Socket | U1-U5 | 540-88-020-17-400-TR | Optional |
| 2 | DIP 32P Socket | U7, U9 | 4832-6000-CP | Optional in EPROM version |
| 1 | 74F74 | U6 | SN74LS74ANSR | |
| 2 | 27C010 OTP EPROM | U7, U9 | AT27C010-70JU-T | PLCC 32 OTP EPROM version |
| 2 | M27C1001 EPROM | U7, U9 | M27C1001-10F1 | DIP 32 EPROM version |
| 1 | SRAM 64K | U8 | AS6C6264-55SCN | |
| 1 | SRAM 256K | U10 | AS6C62256-55SCN | |
| 1 | MC1455 | U11 | MC1455DR2G | |
| 1 | ZVP2106A | Q1 | ZVP2106A | |
| 1 | Trimmer 10K | VR1 | 3362F-1-103LF | |
| 1 | Red LED | D1 | TLCS5100 | |
| 1 | Green LED | D2 | TLCYG5100 | |
| 1 | Diode | D3 | LL4148-M-18 | |
| 1 | Button switch red | SW1 | D6C40F1LFS | |
| 1 | SPDT ON-ON switch | SW2 | 2MS1T1B3M2QES | |
| 1 | Conn edge female 86p | CN1 | ECC43DCAI-S189 | from ebay or digikey ECC43DCAI-S189 |
Now thanks to fongo2k is now available the 3D printed case for the AR3 replica.
https://www.printables.com/model/1037033-amiga-action-replay-3-replica-case
If you found this my work useful, please consider buying me a cup of coffee if you want:
License
This work is licensed under a Creative Commons Attribution 4.0 International License. See https://creativecommons.org/licenses/by/4.0/.
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R6 |
| 5 | GAL16V8 | Package_LCC:PLCC-20 | U1, U2, U3, U4, U5 |
| 4 | C | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3, C4, C5 |
| 2 | 27C010 | Package_LCC:PLCC-32_11.4x14.0mm_P1.27mm | U7, U9 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |
| 2 | ZVP2106A | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1, Q2 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C6 |
| 1 | 3386F-1-103LF | Library:3386F1153 | VR1 |
| 1 | 4.7k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 74LS74 | ARIII_Shared:SO-14_Hyrbrid | U6 |
| 1 | D | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | ECC43DCAI-S189 | Library:ECC43DCAIS189 | CN1 |
| 1 | IS62C256AL | ARIII_Shared:SOP-28_MIL330_ALL | U10 |
| 1 | IS62C64AL | ARIII_Shared:SOP-28_MIL330_ALL | U8 |
| 1 | MC1455B | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U11 |
| 1 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | SW_Push | Button_Switch_THT:SW_Push_2P1T_Toggle_CK_PVA1xxH1xxxxxxV2 | SW1 |
| 1 | SW_Wuerth_450301014042 | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW2 |
The 33 most common of 34 parts.
Questions
How big is the ARIII PCB?
It measures 114 × 96 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ARIII use?
34 parts, built around the 74LS74PC, MC1455BD, ZVP2106A and 3386F-1-103LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ARIII KiCad files?
From the na103/ar3 repository on GitHub, at the commit this page was made from: the board is Kicad/ARIII/ARIII.kicad_pcb and its schematic Kicad/ARIII/ARIII.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ARIII design in my own project?
Its repository states no licence, so its author keeps all rights: ask na103 before reusing the design.
Similar boards
- 4 layers129.5 × 55 mm
Amiga500 Actionreplay 5
Gnome78/MKV_4_DENISE_ITX
Action Replay MK3 For DeniseITX (Based Of Demon Card Project for Amiga)
47 parts1 - 2 layers61 × 31 mm
Latch mosfet boite lettres
Phil-dav/mailbox-lora-tracker
Weight-sensing mailbox notifier: Heltec ESP32 + LoRa + HX711 load cells
17 parts2MIT - 2 layers179 × 88.4 mm
BMS
Wierdwizard2587/ElectricGuitarMK1
This is the repository for the Research and Development, Production, and assembly of the Electric Guitar MK1.
64 parts1 - 2 layers56 × 84 mm
OpenLaserMouseTHT
chris-jh/OpenLaserMouse
Quadrature Optical Mouse Replacement Using an Arduino for the Amiga Tank Mouse
24 parts61LGPL-3.0 - 2 layers111.8 × 50.8 mm
WallClockGen
martinbros/Quantifying-the-Current
Art piece demonstrating the power grid
38 parts2GPL-3.0 - 2 layers231.1 × 106.7 mm
- 2 layers49.6 × 78.3 mm
Odyssey
jotego/jtcores
FPGA cores compatible with multiple arcade game machines and KiCAD schematics of arcade games. Working on MiSTer FPGA/Analogue Pocket
24 parts346GPL-3.0