Skip to the content
2 layers120.6 × 85.5 mmKLOTZ, the printed circuit board in 3D

KLOTZ is 34 keys column-staggered split keyboard. It uses an encoder and three status LEDs on each side.

Size
120.6 × 85.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
56
Nets
46
Pads
353
Tracks, vias
770, 106
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
2 Jul 2022
Updated
1 Aug 2024

Overview

KLOTZ is an open-source printed circuit board by GEIGEIGEIST, from the GEIGEIGEIST/KLOTZ repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 120.6 × 85.5 mm with 56 parts on 46 nets, routed with 770 tracks and 106 vias.

Its parts include 18 switches, 17 diodes, 3 resistors, 3 inductors and 1 IC. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.

README

switchplate/README.md

KLOTZ SWITCHPLATE

If you plan to use the KLOTZ with hotswap sockets you should use a switchplate. If you plan on solder in the switches it looks nicer.

MANUFACTURING

If you want to get the switchplate made you need to upload the KLOTZ_0-2_plate_gerbers.zip file to the website of the manufacture (JLCPCB for example).

  • upload the ZIP
  • sometimes the Gerber preview from JLCPCB can't display the PCB, even when the files are fine. In this case use this dimensions: 120.5 mm* 85.5 mm
  • PCB Thickness 1.2mm (this is crucial to make Choc switches snap in)
  • 2 layers
  • PCB Qty as much as you like. But be aware, that you need 2 plates for one keyboard
  • PCB Color Black
  • No impedance control
  • Surface Finish HASL(with lead) or LeadFree HASL
  • Remove Order Number Yes
  • Flying Probe Test Not Test

KLOTZ switchplate

Parts

56
QtyValueFootprintReferences
17D_SmallKLOTZ:Diode_SOD123D1, D2, D3, D4, D5, D6, D7, D8, D10, D11, D12, D13, D14, D15, D16, D17 +1
17MX_SW_HSKLOTZ:Kailh_socket_PG1350_optional_reversibleSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17 +1
5MountingHoleMountingHole:MountingHole_2.2mm_M2_ISO7380_PadMH1, MH2, MH3, MH4, MH5
4Device_Jumper_NO_SmallKLOTZ:JumperJP1, JP2, JP3, JP4
3220KLOTZ:R_1206_DoubleSidedR1, R2, R3
3LEDKLOTZ:LED_3mm_reversibleL1, L2, L3
1Battery_CellKLOTZ:custombatteryconnectorBT2
1Battery_CellKLOTZ:JST_PH_reversibleBT1
1RotaryEncoderRotary_Encoder:RotaryEncoder_Alps_EC12E_Vertical_H20mmSW18
1SW_DPDT_x2KLOTZ:MSK12C02_reversiblePSW1
1SW_PushKLOTZ:ResetSWRSW1
1nice!nanoKLOTZ:ProMicro_v2U1

The 55 most common of 56 parts.

Similar boards

  • 2 layers90 × 38 mmLCD OLinuXino-5TS Rev.B, the printed circuit board in 3D

    LCD OLinuXino-5TS Rev.B

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    56 parts1.5k
  • 2 layers50.4 × 48.4 mmDistortion, the printed circuit board in 3D

    Distortion

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    56 parts915
  • 2 layers27 × 24.7 mmKawaiiSD, the printed circuit board in 3D

    KawaiiSD

    mackieks/Kawaii

    Tiny, beautiful metal Wii keychain

    56 parts374
  • 2 layers123.9 × 94.4 mmRoba L, the printed circuit board in 3D

    Roba L

    kumamuk-git/roBa

    56 parts363GPL-3.0
  • 2 layers136 × 91.7 mmOne, the printed circuit board in 3D

    One

    ergonautkb/one

    Ergonaut One is an open-source ergonomic wireless split mechanical keyboard designed by Ergonaut Keyboards.

    56 parts210CERN-OHL-P-2.0
  • 2 layers78.5 × 69 mmKicad cpu board, the printed circuit board in 3D

    Kicad cpu board

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    56 parts171
  • 2 layers45 × 45 mmAeroq Hardware v3, the printed circuit board in 3D

    Aeroq Hardware v3

    EnriqueNeyra/Aeroq

    An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54

    56 parts130
  • 2 layers157.4 × 74.2 mmISA8019, the printed circuit board in 3D

    ISA8019

    Manawyrm/ISA8019

    RTL8019-based ISA network card, NE2000-compatible

    56 parts129GPL-3.0

Questions

How big is the KLOTZ PCB?

It measures 120.6 × 85.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the KLOTZ use?

56 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the KLOTZ KiCad files?

From the GEIGEIGEIST/KLOTZ repository on GitHub, at the commit this page was made from: the board is PCB/Klotz.kicad_pcb and its schematic PCB/Klotz.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the KLOTZ design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).