
ClockPort FPC-1x Daisy
mrehkopf/ClockPort-FPC-Adapters
Breakout boards for 30-pin FPC clock port expansions

Breakout boards for 30-pin FPC clock port expansions
ClockPort FPC-4x Clover is an open-source printed circuit board by mrehkopf, from the mrehkopf/ClockPort-FPC-Adapters repository on GitHub. It is a 2-layer board of 34.3 × 43.9 mm with 8 parts on 24 nets, routed with 357 tracks and 46 vias.
Its parts include 5 connectors and 1 capacitor. It belongs with the retro computing and games and lEDs and displays boards of this library.
This project contains two different clock port breakout PCBs for use with my Amiga clock port related projects:

It comprises
NOTE: The pinouts on the "host" boards and the FPC adapters in this repository are not crossed over. Therefore a "B-Type" FPC cable is required to connect them where the contact surfaces are on opposite sides at each end of the cable (top ↔ bottom).
| Pin # | Function |
|---|---|
| 1 | GND |
| 2 | +5V |
| 3 | +5V |
| 4 | +5V |
| 5 | /INT6 |
| 6 | /SPARE0_CS |
| 7 | /SPARE1_CS |
| 8 | /SPARE2_CS |
| 9 | /SPARE3_CS |
| 10 | GND |
| 11 | /RTC_CS |
| 12 | /RTC_PWRBAD |
| 13 | /IORD |
| 14 | /IOWR |
| 15 | A5 |
| 16 | A4 |
| 17 | GND |
| 18 | A3 |
| 19 | A2 |
| 20 | D23 |
| 21 | D22 |
| 22 | D21 |
| 23 | GND |
| 24 | D20 |
| 25 | D19 |
| 26 | D18 |
| 27 | D17 |
| 28 | D16 |
| 29 | /RESET |
| 30 | GND |
| Reference | Description | Package | Qty. |
|---|---|---|---|
| C1 | 10µF MLC ≥ 10V X7R | SMT 0805 | 1 |
| J1 | https://aliexpress.com/item/1005003981823532.html TE 3-1734592-0 Molex 524373071 Amphenol F32R-1A7H1-11030 | 30-lead FPC connector SMT 0.5mm pitch | 1 |
| J2 (Daisy) | 2x11 rectangular male pin header | THT, 2mm pitch | 1 |
| J2..J5 (Clover) | 2x11 rectangular male pin header | THT, 2mm pitch | 4 |
Interactive BOMs are included:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | ClockPortHeader_0 | Connector_PinHeader_2.00mm:PinHeader_2x11_P2.00mm_Vertical | J2 |
| 1 | ClockPortHeader_1 | Connector_PinHeader_2.00mm:PinHeader_2x11_P2.00mm_Vertical | J3 |
| 1 | ClockPortHeader_2 | Connector_PinHeader_2.00mm:PinHeader_2x11_P2.00mm_Vertical | J4 |
| 1 | ClockPortHeader_3 | Connector_PinHeader_2.00mm:PinHeader_2x11_P2.00mm_Vertical | J5 |
| 1 | FPCHeader | mypackages:FPC_30pin_0.5mm_average | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | LOGO | rehkopf:LOGO_6.5x4.8 | G*** |

mrehkopf/ClockPort-FPC-Adapters
Breakout boards for 30-pin FPC clock port expansions


joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
It measures 34.3 × 43.9 mm and has 2 copper layers, 1.6 mm thick.
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mrehkopf/ClockPort-FPC-Adapters repository on GitHub, at the commit this page was made from: the board is ClockPort-FPC-4x-Clover/ClockPort-FPC-4x-Clover.kicad_pcb and its schematic ClockPort-FPC-1x-Daisy/ClockPort-FPC-1x-Daisy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mrehkopf before reusing the design.