
ESP32 boards
12,337 boards- 2 layers43.2 × 73.7 mm

- 2 layers42 × 30.8 mm

- 2 layers10.2 × 7.6 mm

- 2 layers29.5 × 24.3 mm

- 2 layers62.9 × 47 mm

ESP32 CAN
FL0WL0W/ESP32C3-CAN-Extender
This module uses an ESP32C3 with WiFi and BLE. It has 3 configurable outputs (5V push pull, Open Drain, 12V pullup), 4 analog or digital inputs, CAN transceiver, and an automotive power supply so it can be installed…
72 parts20GPL-3.0 - 2 layers40 × 70 mm

Co2home
gcormier/co2home
Phyiscally, this should also work with the Senseair S8 as it has the same pinouts. ESPHome provides a different block to work with this.
20 parts20 - 2 layers41.6 × 47.3 mm

Homekey
lollokara/HomeKey-ESP32-PCB
HomeKey-ESP32-PCB A miniaturized, wall-mountable HomeKey reader board
71 parts20 - 2 layers45.7 × 97.8 mm

- 4 layers20.3 × 40 mm

- 2 layers56.2 × 53.3 mm

- 2 layers94 × 99 mm

Inductance Meter V2-0
RobieElliz/esp32InductanceMeterV2
Portable ESP32 Inductance Meter: A low-cost, high-precision tool with dual 100nF/5µF refs, a TLV3202 comparator, fast USB-C (IP2312) charging, and a 2.4-inch OLED display for real-time readings.
86 parts20MIT - 2 layers36 × 31 mm

ESPDimmer
stelioskat/esp8266-led-dimmer
Wifi enabled LED strip dimmer that is controlled using MQTT messages.
11 parts20MIT - 2 layers46.5 × 11.3 mm

Whisli sense
tjaworski997/whisli-sense
Open-source ESP32 presence sensor with mmWave radar, environmental monitoring, web-based configuration and Home Assistant integration.
12 parts20 - 4 layers51.3 × 23.4 mm

20210211 eduino
ccadic/HackZeGarage
ESP32-S2 and CC1101S 433Mhz usb stick to record and send car gates/garages data keys and open stuff
33 parts19 - 2 layers49.3 × 30.5 mm

WLED All in one ESP32 Controller
Hasenpups/WLED_All-in-one_ESP32_Controller
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
23 parts19 - 2 layers41.9 × 52.3 mm

Nostr zap lamp
lnbits/nostr-zap-lamp
Get a visual Zap! when someone zaps your or anyone on Nostr.
5 parts19 - 2 layers59 × 28 mm

- 4 layers33 × 65.5 mm

OM FlexGrid Rigid PCB
Open-Muscle/OpenMuscle-FlexGrid
60-sensor wearable with flexible PCB and pressure matrix
65 parts19CERN-OHL-S-2.0 - 8 layers35 × 35 mm

OpenAIO
OpenDrone-hw/OpenAIO
Open-source AIO for 2-6S toothpick quads: flight controller, 4-in-1 AM32 ESC and ExpressLRS receiver, 25.5x25.5 mm.
343 parts19CERN-OHL-S-2.0 - 2 layers98 × 83.8 mm

Projeto placa
phfbertoleti/placa_lorawan
Repositório oficial da placa LoRaWAN, um kit de desenvolvimento para protótipos IoT.
39 parts19MIT - 2 layers61 × 61 mm

- 2 layers95 × 65 mm

- 2 layers63.5 × 99.1 mm

- 2 layers41.4 × 34 mm

Ferrous slime
TheButlah/slimevr_pcb
A collection of PCBs designed for SlimeVR full-body trackers
60 parts19