Skip to the content

Radio and wireless

4,012 boards
  • 2 layers65 × 30 mmSolarCamPi, the printed circuit board in 3D

    SolarCamPi

    Manawyrm/SolarCamPi

    solar-powered WiFi webcam

    54 parts17MIT
  • 4 layers70 × 92.8 mmFE 8CH, the printed circuit board in 3D

    FE 8CH

    osqzss/PocketSDR

    The Pocket SDR FE device includes 2, 4, or 8 RF frontend channels, supporting the GNSS L1 band (1525 - 1610 MHz) or L2/L5/L6 bands (1160 - 1290 MHz). For these signal bands, refer to GNSS Signal Bands.

    238 parts17
  • 2 layers99.1 × 49.9 mmRc fabgl, the printed circuit board in 3D

    Rc fabgl

    PickledDog/rc-fabgl

    FabGL terminal board for RC2014

    47 parts17Apache-2.0
  • 2 layers98.5 × 34 mmPulse LoRa, the printed circuit board in 3D

    Pulse LoRa

    risejohan/2Bit

    In this repo we can see some designs with free use for the community, 2 Bit electronic

    86 parts17
  • 2 layers50.8 × 30.5 mmRadio-86rk rom, the printed circuit board in 3D

    Radio-86rk rom

    skiselev/radio-86rk-rom

    ROM cartridge for Radio-86RK

    9 parts17GPL-3.0
  • 6 layers144.8 × 106.7 mmLoriques, the printed circuit board in 3D

    Loriques

    skot/Loriques

    A solar powered Meshtastic LoRa gateway

    122 parts17CERN-OHL-S-2.0
  • 2 layers68.6 × 53.3 mmXyloShield, the printed circuit board in 3D

    XyloShield

    StefanKrupop/XyloShield

    Shield for Arduino that hosts a RFM26W radio module and allows DMX-512 connectivity

    19 parts17
  • 4 layers29.5 × 64.5 mmIot esp eth ind, the printed circuit board in 3D

    Iot esp eth ind

    wayri/SPIKE

    PCB-focused multiphysics simulation, from board to complete assembly: PI, SI, circuits, thermal, EM/RF and mechanical workflows, with MCAD collaboration and a roadmap toward large-scale coupled assemblies.

    150 parts17
  • 2 layers80.6 × 61 mmSmartBMSdisplay, the printed circuit board in 3D

    SmartBMSdisplay

    wholybee/esp32-smartBMSdisplay

    ESP32 version of JBD BMS display with Bluetooth connection

    11 parts17
  • 4 layers54.6 × 86.3 mmA0, the printed circuit board in 3D

    A0

    absmach/a0

    A0 IoT Gateway

    131 parts16Apache-2.0
  • 2 layers86.4 × 49.5 mm16-led board, the printed circuit board in 3D

    16-led board

    AravinthPanch/various-hardware-projects

    Collection of various PCB designs and Firmware for prototyping projects

    36 parts16Apache-2.0
  • 2 layers38.1 × 38.1 mmDisplay Adapter, the printed circuit board in 3D

    Display Adapter

    atoomnetmarc/IoT12

    Schematic, PCB files, firmware and 3d models for creating the IoT12 solder iron temperature controller for T12 compatible tips.

    2 parts16Apache-2.0
  • 2 layers39.9 × 45 mmCanBus Radio VAG, the printed circuit board in 3D

    CanBus Radio VAG

    AugustoS97/CanBus-Radio-VAG

    CANBUS PCB to control original functions of VAG (VW, SKODA, SEAT, AUDI) cars (such us original DSP and other functions).

    35 parts16
  • 4 layers100.9 × 71.5 mmRaccoon, the printed circuit board in 3D

    Raccoon

    barbinbrad/raccoon

    Car Hacking PCB and firmware for a USB to CAN interface, with support for 4 CAN transceivers and an optional NEO-MP8 GNSS module.

    56 parts16MIT
  • 4 layers100 × 100 mmSDR board, the printed circuit board in 3D

    SDR board

    BillyWoods/Narrowband-SDR

    A four-channel narrowband SDR receiver based around the Mirics MSi001, MAX11131 and FX2LP.

    467 parts16
  • 2 layers92.5 × 82.8 mmRifle and sensors, the printed circuit board in 3D

    Rifle and sensors

    DAlexis/caustic-lasertag-system

    Caustic project is a full-featured indoor and outdoor lasertag system

    268 parts16
  • 2 layers50 × 100 mmSpoke, the printed circuit board in 3D

    Spoke

    FeruzTopalov/spoke

    Standalone LoRa-based real-time off-grid relative GPS navigation for group of up to 5 people. Improved version of LRNS Eleph

    143 parts16GPL-3.0
  • 2 layers81.3 × 36.8 mmAirQualitySensor, the printed circuit board in 3D

    AirQualitySensor

    Finomnis/AirQualitySensor

    Simple Air Quality sensor based on nRF52840, Zigbee, AM2302/DHT22 and Senseair S8

    44 parts16Apache-2.0
  • 2 layers43.7 × 27.9 mmGR Wifi Current Trigger, the printed circuit board in 3D

    GR Wifi Current Trigger

    GadgetReboot/WiFi_Current_Transformer

    ESP8266 based current transformer interface

    15 parts16
  • 2 layers95 × 72 mmAPRS Radio Interface, the printed circuit board in 3D

    APRS Radio Interface

    hiperiondev/esp32idf_APRS

    APRS station on a single ESP32

    25 parts16GPL-3.0
  • 2 layers61 × 61 mmStm32-rfid clone, the printed circuit board in 3D

    Stm32-rfid clone

    joeferner/stm32-rfid-clone

    STM32 RFID Reader / Writer

    112 parts16
  • 2 layers32 × 29 mmBeeLight, the printed circuit board in 3D

    BeeLight

    Kampi/BeeLight

    Zigbee environment sensor device with Zigbee2MQTT support.

    25 parts16GPL-3.0
  • 2 layers25.4 × 30.5 mmRoomba, the printed circuit board in 3D

    Roomba

    kg333/roomba_esp_wifi

    Board for adding wifi using ESP-12 to Roomba 500/600 series

    16 parts16
  • 2 layers22 × 32 mmH2 carrier, the printed circuit board in 3D

    H2 carrier

    Pulpyyyy/zigcreate-ota

    OTA firmware releases for zigcreate (ESP32-H2 Zigbee)

    3 parts16