2 layers100 × 100 mm
AraBase atmega2560
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
21 parts16Apache-2.0
2 layers86.4 × 49.5 mm
16-led board
AravinthPanch/various-hardware-projects16Collection of various PCB designs and Firmware for prototyping projects
- Size
- 86.4 × 49.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 41
- Pads
- 103
- Tracks, vias
- 0, 0
- Pours
- 2
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 22 Aug 2017
- Updated
- 5 May 2022
Overview
16-led board is an open-source printed circuit board by AravinthPanch, from the AravinthPanch/various-hardware-projects repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 86.4 × 49.5 mm with 36 parts on 41 nets.
It is built around the 74HC595. Its parts include 16 resistors, 16 diodes, 2 ICs, 1 capacitor and 1 connector. It belongs with the radio and wireless and interfaces and adapters boards and the MSP430 boards of this library.
Main components
1README
README.mdvarious-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 220 Ohm | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 16 | LED | LEDs:LED_0805 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 2 | 74HC595 | SMD_Packages:SO-16-N | U1, U2 |
| 1 | 200uF | Capacitors_SMD:CP_Elec_6.3x5.3 | C1 |
| 1 | CONN_01X05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | P1 |
More from AravinthPanch/various-hardware-projects
10- 2 layers
Atmega2560-baseboard
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
18 parts16Apache-2.0 - 2 layers59.7 × 45.7 mm
7-segment brd
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
11 parts16Apache-2.0 - 2 layers38 × 36.2 mm
Led star
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
11 parts16Apache-2.0 - 2 layers30.5 × 30.5 mm
Lpkf test
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
7 parts16Apache-2.0 - 2 layers36.8 × 49.5 mm
Blinky
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
7 parts16Apache-2.0 - 2 layers27.9 × 21.6 mm
Lpkf test min
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
6 parts16Apache-2.0 - 2 layers89.4 × 83 mm
Breaz blinky pcb
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
6 parts16Apache-2.0 - 2 layers16.5 × 15.2 mm
Lpkf test
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
5 parts16Apache-2.0 - 2 layers31.8 × 30.5 mm
Nrf24-breakout
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
3 parts16Apache-2.0
Similar boards
- 2 layers45.7 × 31.8 mm
LEDx16 board
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
36 parts803MIT - 2 layers228.6 × 100 mm
Mongus48
ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board
124 parts335GPL-3.0 - 2 layers245.1 × 160 mm
8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326 - 2 layers100 × 95.1 mm
Protoboard-6x4-breakout
electroniceel/protoboard
Advanced protoboard layout with 1.27mm pitch for smd parts
4,745 parts311CC-BY-4.0 - 4 layers140 × 100 mm
Dc usv
TobleMiner/DC-UPS
A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages
351 parts223CERN-OHL-P-2.0 - 2 layers100.5 × 218.3 mm
- 2 layers287.8 × 126.7 mm
- 2 layers100 × 100 mm
Questions
How big is the 16-led board PCB?
It measures 86.4 × 49.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 16-led board use?
36 parts, built around the 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 16-led board KiCad files?
From the AravinthPanch/various-hardware-projects repository on GitHub, at the commit this page was made from: the board is 16-led-pcb-kicad/16-led-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 16-led board design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).