Atmel

75 boards

KiCad boards from 15 GitHub repositories tagged “atmel”, the most starred first; open any of them in PCBKit.

2 layers116.8 × 73.7 mm
DuPal V3
DuPAL-PAL-DUmper/DuPAL_Board
This repository contains the KiCad files and the gerber files for the DuPAL boards.
133 parts57CC-BY-SA-4.0
2 layers101.6 × 53.3 mm
Avr hv2
dilshan/avr-hv2
AVR High Voltage Programmer 2
17 parts30MIT
2 layers86.4 × 49.5 mm
16-led board
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
36 parts16Apache-2.0
2 layers40.6 × 68.6 mm
Eeprom programmer
yoppeh/eeprom-programmer
An Arduino Nano sketch and schematic for an Atmel 28cx programmer.
7 parts10MIT
2 layers26 × 41 mm
Driverino
weirdgyn/Driverino
BLDC motor driver based on Arduino Micro Pro and TI MCT8316ZR
73 parts6GPL-3.0
2 layers198.1 × 193 mm
STE25
stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.
252 parts5BSD-2-Clause
2 layers95.6 × 95.5 mm
Panel
ansemjo/pi2co-usb
USB to I2C bridge using an Atmel AVR ATtiny85V and even more tiny than I2C-Tiny-USB.
492 parts4GPL-2.0
2 layers78.7 × 38.1 mm
PCB2 Display
Andreas-Wahl/Startlight-HW
SLOTCAR STARTLIGHT "Bären(n)keller - HARDWARE
34 parts2
2 layers94 × 63.8 mm
TinySensorv1
arcadien/tinySensor
Firmware and generic board for low-power environment sensors
45 parts2MIT
2 layers73 × 48 mm
Berg wire jumper extender
nandanghawate/arduino-atmega328-custom-hw-sw-projects-NG
This will be / is the collection of sample circuits, PCB layouts, codes and libraries that I will create during the process of exploring ATMEGA328, Arduino - Uno, Nano, Mini
19 parts2
2 layers176.4 × 21.4 mm
LedClock
qb-creates/pov-led-clock
POV Clock using an ATmega32 microcontroller.
47 parts2MIT
2 layers50.8 × 20.3 mm
ATF150x uDEV
bkw777/ATF150x_uDEV
Tiny dev board for ATF1502AS(V)(L)-xAx44 and ATF1504AS(V)(L)-xAx44
14 parts1
2 layers20.3 × 19.3 mm
Attiny48
joshnuss/attiny48
Devboard for ATtiny 48/88
11 parts1
4 layers
IgnisV2
TehoorMarjan/Ignis
An autonomous flame-shaped lamp/nightlight controlled by microcontroller with WS2812B LED ring and integrated Qi wireless charging. 🔥
86 parts1
2 layers117 × 94.6 mm
5x5x5 Led Cube
qb-creates/LedCube
5x5x5 LED Cube using an ATmega32
53 parts
2 layers113 × 78.7 mm
DuPal DIP
DuPAL-PAL-DUmper/DuPAL_Board
This repository contains the KiCad files and the gerber files for the DuPAL boards.
57 parts57CC-BY-SA-4.0
2 layers20.4 × 53.9 mm
Eprom 01
DuPAL-PAL-DUmper/DuPAL_Board
This repository contains the KiCad files and the gerber files for the DuPAL boards.
19 parts57CC-BY-SA-4.0
2 layers80 × 58.4 mm
Pod 1702A 2708
DuPAL-PAL-DUmper/DuPAL_Board
This repository contains the KiCad files and the gerber files for the DuPAL boards.
15 parts57CC-BY-SA-4.0
2 layers17.4 × 53.9 mm
Pod pal
DuPAL-PAL-DUmper/DuPAL_Board
This repository contains the KiCad files and the gerber files for the DuPAL boards.
8 parts57CC-BY-SA-4.0
2 layers59.7 × 45.7 mm
7-segment brd
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
11 parts16Apache-2.0
2 layers100 × 100 mm
AraBase atmega2560
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
21 parts16Apache-2.0
2 layers
Atmega2560-baseboard
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
18 parts16Apache-2.0
2 layers36.8 × 49.5 mm
Blinky
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
7 parts16Apache-2.0
2 layers89.4 × 83 mm
Breaz blinky pcb
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
6 parts16Apache-2.0