2 layers251.3 × 108.7 mm
2 layers287.8 × 126.7 mm
NoName
AlaaSaadAbdo/battoota188Keyboards
- Size
- 287.8 × 126.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 267
- Nets
- 237
- Pads
- 1,705
- Tracks, vias
- 0, 0
- Pours
- 1
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 26 Apr 2022
- Updated
- 8 Oct 2024
Overview
NoName is an open-source printed circuit board by AlaaSaadAbdo, from the AlaaSaadAbdo/battoota repository on GitHub. It is a 2-layer board of 287.8 × 126.7 mm with 267 parts on 237 nets.
It is built around the DRV2605LDGS, PMW3360DM-T2QU and 74HC595, with the 74LVC1T45W6, VRH1902LTX and SK6812MINI-E among its other parts. Its parts include 141 diodes, 80 switches, 9 capacitors, 7 resistors and 7 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
8
DRV2605LDGS
VSSOP-10-0.5mm-40℃~+85℃ 1 2V~5.2V 500uA I2C Yes VSSOP-10-0.5mm Brushed DC Motor Drivers ROHSTexas InstrumentsBrushed DC Motor Drivers
PMW3360DM-T2QU
DIP-16Low-power mode、Interrupt output、Self-test function DIP-16 Specialized Sensors ROHSPixArtSpecialized Sensors
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
74LVC1T45W6
SOT-26-40℃~+125℃ 1 1 1.65V~5.5V 1.65V~5.5V Bidirectional Power-Off Protection Tri-State SOT-26 Translators, Level Shifters ROHSDiodes IncorporatedTranslators, Level Shifters
VRH1902LTX
SOT-23-5-40℃~+85℃ 1 1.9V 250mA 25uA 6V 75dB@(1kHz) 90mV Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnaSemVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
B5817WS
SOD-323-55℃~+150℃ 10A 1A 1mA@20V 20V 450mV@1A Independent SOD-323 Schottky Diodes ROHShongjiachengSchottky Diodes
README
README.mdDisclaimer: Please keep in mind that there are prototypes here. Use the files at your own risk.
Pictures
Credits/references
All of the boards here wouldn't be possible without the help of some awesome people and their projects:
Parts
267| Qty | Value | Footprint | References |
|---|---|---|---|
| 77 | 1N4148 | Alaa:D_SOD-123-rotated | D1, D10, D11, D12, D110, D111, D112, D113, D114, D115, D116, D117, D118, D119, D120, D121 +61 |
| 75 | SW_Push | Alaa:Kailh_hotswap_only_MX-CHOC | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +59 |
| 43 | SK6812MINI-E | Alaa:MX_SK6812MINI-E_REV | D41, D42, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53, D54, D55, D56, D57 +27 |
| 20 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D37, D38, D39, D93, D94, D95, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109 +4 |
| 8 | MountingHole_Pad | Alaa:MountingHole_M3 | H1, H2, H3, H4, H5, H8, H9, H10 |
| 6 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C4, C5, C7, C8, C9 |
| 6 | 10K | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R6, R7 |
| 4 | Conn_01x12_Female | Alaa:FPC-SMD_FPC05012-09200-.5mm-rev | J1, J2, J3, J6 |
| 2 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2, U7 |
| 2 | LOGO | LOGO | G***, G1 |
| 2 | Rotary_Encoder_Switch | Alaa:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm-keebio_modified | SW47, SW48 |
| 2 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1, JP3 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 39 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 500mA | josh-passives-smt:Fuse_0603_1608Metric | F1 |
| 1 | 74LVC1T45 | Alaa:SOT-563 | U6 |
| 1 | B5817WS | josh-passives-smt:D_SOD-323 | D40 |
| 1 | Conn_01x08_Female | Alaa:3JST_BAT | J4 |
| 1 | Conn_01x08_Female | Alaa:Screen Dupont | J5 |
| 1 | DRV2605L | Alaa:Pimoroni Haptic Buzz DRV2605L Driver | U5 |
| 1 | Elite-C | Alaa:Helios-SeaPicro | U1 |
| 1 | G*** | kibuzzard-638CDE9C | kibuzzard-638CDE9C |
| 1 | G*** | kibuzzard-63B8279E | kibuzzard-63B8279E |
| 1 | G*** | kibuzzard-63B827BA | kibuzzard-63B827BA |
| 1 | G*** | kibuzzard-638CDF14 | kibuzzard-638CDF14 |
| 1 | PMW3360DM-T2QU | Alaa:PMW3360DM-T2QU | U4 |
| 1 | RotaryEncoder | Alaa:PERS56v2 | SW36 |
| 1 | SW_Push | Alaa:SKQG-1155865 | SW35 |
| 1 | SW_SPDT | Alaa:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW37 |
| 1 | VRH1902LTX | Package_TO_SOT_SMD:SOT-23-5 | U3 |
More from AlaaSaadAbdo/battoota
12- 2 layers304.3 × 135 mm
- 2 layers273.8 × 90.9 mm
- 2 layers260.6 × 134.4 mm
- 2 layers260.6 × 134.4 mm
- 2 layers262.4 × 124.1 mm
- 2 layers227.5 × 87.4 mm
- 2 layers194.5 × 73.2 mm
- 2 layers230.5 × 102.3 mm
- 2 layers244.9 × 106.3 mm
- 2 layers232.4 × 113.3 mm
- 2 layers247.7 × 105.6 mm
Similar boards
- 4 layers166.6 × 94 mm
Panel
nrdsp/rvPhone
The goal of the this project is to develop a privacy enhanced, simple and fully featured mobile phone.
319 parts - 2 layers35 × 54 mm
Evoluent
mon/evoluent_better_pcb
PCBs using better sensor for Evoluent VerticalMouse products
30 parts11MIT - 4 layers17.8 × 33 mm
- 4 layers137 × 141 mm
- 2 layers102.5 × 199 mm
- 4 layers60.5 × 60 mm
BusPirate-5-rev10
DangerousPrototypes/BusPirate5-hardware
Bus Pirate Hardware and accessories for v5 and higher
220 parts125MIT - 2 layers42 × 49 mm
- 2 layers342.9 × 109.6 mm
Questions
How big is the NoName PCB?
It measures 287.8 × 126.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NoName use?
267 parts, built around the DRV2605LDGS, PMW3360DM-T2QU, 74HC595 and 74LVC1T45W6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NoName KiCad files?
From the AlaaSaadAbdo/battoota repository on GitHub, at the commit this page was made from: the board is boards/60keys/noName/untitled.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NoName design in my own project?
Its repository states no licence, so its author keeps all rights: ask AlaaSaadAbdo before reusing the design.