6 layers82 × 155 mm
Raspberrypi
63 boardsKiCad boards from 39 GitHub repositories tagged “raspberrypi”, the most starred first; open any of them in PCBKit.
- 2 layers35 × 50 mm
- 6 layers43.8 × 29.9 mm
Argo v2
azlan-works/Argo
A custom, opensource CM5 carrier board for portable and compact applications.
80 parts136CERN-OHL-S-2.0 - 2 layers99.7 × 64 mm
- 2 layers65 × 56 mm
ClumsyMIDI
gmcn42/clumsyMIDI
A THT-only Raspberry Pi expansion board containing a MIDI interface, DAC, and OLED display
26 parts90CC-BY-SA-4.0 - 2 layers308.7 × 241.8 mm
OTTOtact
cester-ino/OTTO-hardware
those specs refer to the tactile buttons version, but a led backlight button version is in the works too.
229 parts49GPL-3.0 - 2 layers65 × 30 mm
- 2 layers191.9 × 127.7 mm
EInkFrame
seb-ma/eInkFrame
A step by step guide to create a weather station (and more) in e-ink frame running with MagicMirror².
24 parts26 - 2 layers65 × 30 mm
- 2 layers86.4 × 49.5 mm
16-led board
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
36 parts16Apache-2.0 - 2 layers51 × 20 mm
- 2 layers85 × 56 mm
- 2 layers140 × 90 mm
- 4 layers105 × 30 mm
Better Klipper Expander
Fisheiyy/Better-Klipper-Expander
A RP2040 based 3D Printer Port Expander
95 parts14 - 4 layers25.5 × 22.4 mm
Wi se rewirable
depau/wi-se-hw
Cheap and tiny ESP8266 boards for Wi-Se to access your SBC or router serial port remotely
51 parts11 - 2 layers65 × 56 mm
Printer HAT
mikenorgate/3d-printer-power-hat
A Raspberry PI HAT for controlling power to your 3D printer
38 parts10 - 2 layers65 × 56 mm
B33rn4ryCounterPCB
Geraffel-Village/Beernary
Hard- & software stack for authentication, authorization and accounting of your private beer tap via RFID tokens. Created by the Geraffel gang, it runs reliably on very simple and cheap hardware.
15 parts8GPL-2.0 - 2 layers65 × 56 mm
- 2 layers56 × 65 mm
SmarterPi
klein0r/pcb-smarter-pi
Just a simple Hat for your Raspberry Pi (2,3,4) to provide an easier connection for peripherals
27 parts6MIT - 2 layers65 × 59 mm
Mender shield
joelguittet/mender-shield
The Mender Shield illustrates the capability to run a Mender client on heterogeneous platforms
54 parts5Apache-2.0 - 4 layers65 × 30 mm
Faux pi-0
DLehenbauer/faux-pi-zero
RP2040 dev board in a Raspberry Pi Zero compatible form factor. Includes DVI and SD Card.
63 parts4 - 4 layers105.3 × 75.1 mm
FriedSalmon2040
Fisheiyy/FriedSalmon2040
A, probably partially-functional, RP2040 based, 3D Printer Motherboard.
184 parts3 - 4 layers86.5 × 42.1 mm
- 2 layers126.4 × 97.8 mm
