
Nodo BMS 1 1
AugustoS97/BMS-BatterySystem
Repositorio con el diseño de un BMS y una batería como TFM

CANBUS PCB to control original functions of VAG (VW, SKODA, SEAT, AUDI) cars (such us original DSP and other functions).
CanBus Radio VAG is an open-source printed circuit board by AugustoS97, from the AugustoS97/CanBus-Radio-VAG repository on GitHub. It is a 2-layer board of 39.9 × 45 mm with 35 parts on 29 nets, routed with 292 tracks and 51 vias.
It is built around the ATMEGA328P-PU, TJA1050T/CM and MP2307DN-Z. Its parts include 8 capacitors, 6 resistors, 4 ICs, 3 diodes and 3 connectors. It belongs with the interfaces and adapters and radio and wireless boards and the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 2 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R6 |
| 2 | 27pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4 |
| 2 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2, D3 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 12-22 pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 12-22pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6 |
| 1 | 120R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 16MHz | Crystal:Crystal_HC49-4H_Vertical | Y2 |
| 1 | 1N4007 | Diode_SMD:D_SMA_Handsoldering | D1 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 1uF | Capacitor_Tantalum_SMD:CP_EIA-1608-10_AVX-L_Pad1.25x1.05mm_HandSolder | C8 |
| 1 | 5k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 8MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | ATmega328P-PU | SmartBMS:TQFP-32_7x7mm_P0.8mm | U3 |
| 1 | CAN-TERM-JUMPER | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | CAR | Connector_JST:JST_XH_S8B-XH-A-1_1x08_P2.50mm_Horizontal | J3 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | LOGO | logos_pcb:logo_augusto | G*** |
| 1 | MCP2515-xSO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U1 |
| 1 | MP2307 | SmartBMS:MP2307 | U4 |
| 1 | ON-LED | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | SW_Push-Switch | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | TJA1050T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J1 |
| 1 | fuse 1A | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |

AugustoS97/BMS-BatterySystem
Repositorio con el diseño de un BMS y una batería como TFM

Tincho1286/Synchra
Synchra reúne el desarrollo de un controlador electrónico de velocidad (ESC) sensorless basado en Arduino/ATmega328, su electrónica asociada y un sistema de control remoto.


JeyRunner/actonator
3D printable robot actuator with belt-driven gearbox and custom FOC driver board.

dremeier/Arduino-JK-BMS-To-Pylontech-CAN-PCB
PCB and Case for the Arduino JK-BMS To Pylontech CAN converter


monsterzack5/AutoMato
A Car based automation framework, fully integrated with Node-Red!

It measures 39.9 × 45 mm and has 2 copper layers, 1.6 mm thick.
35 parts, built around the ATMEGA328P-PU, TJA1050T/CM and MP2307DN-Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AugustoS97/CanBus-Radio-VAG repository on GitHub, at the commit this page was made from: the board is Electronic/PCB/CanBus-Radio-VAG-V1.0/CanBus-Radio-VAG.kicad_pcb and its schematic Electronic/PCB/CanBus-Radio-VAG-V1.0/CanBus-Radio-VAG.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AugustoS97 before reusing the design.