Skip to the content

Robots and motor control

4,066 boards
  • 6 layers40.5 × 43 mmVENDETTAESC, the printed circuit board in 3D

    VENDETTAESC

    Caped-Crussader/VENDETTAFC

    A fully open-source, custom-designed 4-in-1 ESC and F7 Flight Controller stack for FPV multirotors, designed from scratch in KiCad.

    236 parts31CERN-OHL-S-2.0
  • 2 layers60 × 60 mmHighPower Mechaduino, the printed circuit board in 3D

    HighPower Mechaduino

    pointhi/HighPower-Mechaduino

    Mechaduino derivative which drives up to 10A, drawn using KiCad

    140 parts31
  • 2 layers85 × 60 mmBLDC STC15W401, the printed circuit board in 3D

    BLDC STC15W401

    oshwcom/BLDC_STC15W401

    低成本(RMB 7元左右)12V的bldc驱动电路。基于STC15W401AS单片机。

    61 parts30Unlicense
  • 2 layers100 × 90 mmDc motor driver, the printed circuit board in 3D

    Dc motor driver

    ROAR-QUTRC/perseus-v2

    The main codebase for perseus starting 2024

    85 parts30MIT
  • 2 layers67 × 50 mmQuadcopterMain, the printed circuit board in 3D

    QuadcopterMain

    vedderb/QuadcopterSystem

    The hardware and software for our quadcopter system

    95 parts30GPL-3.0
  • 4 layers56 × 43.3 mmStepperServoCAN, the printed circuit board in 3D

    StepperServoCAN

    dzid26/StepperServo-hardware

    Stepper actuator controller

    155 parts29GPL-3.0
  • 4 layers77.6 × 57.3 mmWifistepper, the printed circuit board in 3D

    Wifistepper

    goodrobotics/wifistepper

    Wi-Fi Stepper project repo

    92 parts29
  • 2 layers70 × 20.1 mmSPD DC MotorHBridge, the printed circuit board in 3D

    SPD DC MotorHBridge

    Jarins/Solder-Paste-Dispenser-with-DCMotor

    Motorized solder paste dispenser

    48 parts29GPL-3.0
  • 2 layers24 × 32 mmMt6835-hoverboard, the printed circuit board in 3D

    Mt6835-hoverboard

    mcells/mt6835-hoverboard-motor

    MT6835 magnetic Encoder Breakout board, eg. for mounting inside Hoverboard motors

    14 parts29
  • 2 layers47.6 × 69.1 mmPico Drone, the printed circuit board in 3D

    Pico Drone

    TheNoobInventor/pi-pico-drone

    A micro drone is made using the Raspberry Pi Pico W. It is fitted with the MPU6050 IMU module and BMP280 barometric sensor. The drone will be controlled using TinyMPC and employ a Micro-ROS client on FreeRTOS.

    33 parts29Apache-2.0
  • 2 layers39.2 × 52.3 mmTeensyFOC, the printed circuit board in 3D

    TeensyFOC

    tthom289/TeensyFOC-Carrier

    Teensy 4.0 + SimpleFOC carrier board for brushless motor control in a rotating LiDAR SLAM platform. Designed for the Subterranean Systems VLP-16 scanner — integrates AS5600 magnetic encoder, slip ring passthrough, and…

    16 parts29MIT
  • 4 layers96 × 172 mmServo cpu, the printed circuit board in 3D

    Servo cpu

    wiciu15/servo2

    Servo inverter for 3-phase AC motor with/out encoder feedback

    167 parts29
  • 2 layers120 × 100 mmRoot, the printed circuit board in 3D

    Root

    GonzaCerv/noah-hardware

    This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.

    127 parts28MIT
  • 2 layersRobot MGR, the printed circuit board in 3D

    Robot MGR

    rayvburn/diff_drive_mapping_robot

    ROS driver for the Raspberry Pi based differential drive robot

    95 parts27
  • 2 layers82.8 × 63 mmBldc BMS, the printed circuit board in 3D

    Bldc BMS

    mpater/bldc-BMS

    Battery management system for a VESC

    175 parts26
  • 2 layers94 × 85 mmSumoBot, the printed circuit board in 3D

    SumoBot

    ErichStyger/McuMiniSumoRobot

    Mini Sumo Robot

    86 parts25
  • 2 layers37 × 18.3 mmRTL8812AU module, the printed circuit board in 3D

    RTL8812AU module

    ochin-space/ochin-CM4v2

    It' the repository for the docs and schematics related to the ochin-CM4v2.x.x Carrier Board

    9 parts25GFDL-1.3
  • 2 layers52.5 × 37.5 mmNeutrino display, the printed circuit board in 3D

    Neutrino display

    the-openary/neutrino

    A cheap, accessible 3D printer that fits in a filament box! By @qcoral

    7 parts24MIT
  • 4 layersMoco od501, the printed circuit board in 3D

    Moco od501

    ziteh/moco

    PMSM/BLDC motor controller/driver PCBs

    102 parts24CERN-OHL-P-2.0
  • 2 layers120 × 90 mmBobbycontroller, the printed circuit board in 3D

    Bobbycontroller

    bobbycar-graz/Bobbycar-FOC-hardware

    Our own dual BLDC Motorcontroller

    328 parts23
  • 4 layersBldc, the printed circuit board in 3D

    Bldc

    maruta/Compact-SimpleFOC-Board

    Design file of Compact SimpleFOC Controller Board

    66 parts23MIT
  • 2 layers50 × 50 mm2x2, the printed circuit board in 3D

    2x2

    brainsmoke/miniball

    Folded LED ball PCB

    149 parts22
  • 2 layers77.7 × 73.2 mmBMT BionX Minimum Translator vereinfacht, the printed circuit board in 3D

    BMT BionX Minimum Translator vereinfacht

    stancecoke/BionX_Minimal_Translator

    Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components

    40 parts22GPL-3.0
  • 4 layers76 × 82.5 mmNucleo64 CNC, the printed circuit board in 3D

    Nucleo64 CNC

    terjeio/CNC_Breakout_Nucleo64

    CNC breakout for STM324F411 and ST32F446 development boards

    120 parts22