

BMT BionX Minimum Translator vereinfacht
Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components
- Size
- 77.7 × 73.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 56
- Pads
- 152
- Tracks, vias
- 291, 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Jun 2020
- Updated
- 14 Feb 2026
Overview
BMT BionX Minimum Translator vereinfacht is an open-source printed circuit board by stancecoke, from the stancecoke/BionX_Minimal_Translator repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 77.7 × 73.2 mm with 40 parts on 56 nets, routed with 291 tracks and 4 vias.
It is built around the VOM1271, IRF3205 and BCP56. Its parts include 12 resistors, 9 capacitors, 8 connectors, 7 ICs and 3 transistors. It belongs with the lEDs and displays and robots and motor control boards of this library.
Main components
3README
README.mdBionX_Minimal_Translator
Run a BionX Motor with a Kunteng LCD-Display
Discussion in german forum
"Bluepill" STM32F103 Board
CAN-Driver-Board
Step Down Converter 12V + 5V
Kunteng Display
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10µ | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C3, C4, C5, C6, C7, C8, C9 |
| 5 | 2.2k | Resistor_SMD:R_0805_2012Metric | R1, R2, R6, R8, R11 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R5, R7, R9 |
| 2 | IRF3205 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 2 | VOM1271 | Package_SO:SOP-4_3.8x4.1mm_P2.54mm | U3, U5 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 15V | Diode_SMD:D_0805_2012Metric | D1 |
| 1 | 22 | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 47µ | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 56k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | BCP56 | Package_TO_SOT_SMD:SOT-223 | Q3 |
| 1 | BP | Module:BluePill | U1 |
| 1 | Batterieanschluß | Connector_Wago:Wago_734-132_1x02_P3.50mm_Vertical | J9 |
| 1 | Brake connector | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | CAN Connector | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | External BB Torquesensor | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | Kunteng Display Connector | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U7 |
| 1 | LM7812_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U6 |
| 1 | MCP2551-CAN Transceiver | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U2 |
| 1 | Rosenberg Motor | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | SAE Power Connector Motor | Connector_Wago:Wago_734-132_1x02_P3.50mm_Vertical | J2 |
| 1 | SD12-5 | Module:StepDownModule_12V_5V | U4 |
| 1 | Throttle connector | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J6 |
Similar boards
- 4 layers200 × 100 mm

- 2 layers112 × 92 mm

BatterySwitch Steuerplatine
bugtesterdani/BatterySwitch
Automatische Umschaltung zwischen zwei Akkus (Batterie 1: 50 Ah, Batterie 2: 30 Ah) in einem 72-V-System (ca. 71,x V Ladeschluss, ca. 58 V Entladeschluss — z. B.
56 parts - 2 layers64.8 × 39.4 mm

- 4 layers128.5 × 88.3 mm

- 2 layers169.4 × 48.8 mm

Usb morse keyer
dilshan/usb-morse-keyer
PIC16F886 based CW auto key controller with USB support
84 parts17MIT - 4 layers252 × 152 mm

CTA control board
PySpice-org/eda-rw
Python library to read/write KiCad and LibrePCB Sexpr file format
619 parts9 - 4 layers136.1 × 70.6 mm

- 4 layers76.2 × 76.2 mm

Dodekaedri
e-xla/dodekaedri
dodekaedrin muotoinen radio ":D" / dodecahedron shaped radio ":D"
227 parts2
Questions
How big is the BMT BionX Minimum Translator vereinfacht PCB?
It measures 77.7 × 73.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BMT BionX Minimum Translator vereinfacht use?
40 parts, built around the VOM1271, IRF3205 and BCP56. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BMT BionX Minimum Translator vereinfacht KiCad files?
From the stancecoke/BionX_Minimal_Translator repository on GitHub, at the commit this page was made from: the board is KiCAD/BMT BionX_Minimum_Translator_vereinfacht.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BMT BionX Minimum Translator vereinfacht design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).