Skip to the content
4 layers136.1 × 70.6 mmMppt, the printed circuit board in 3D

free software/hardware mppt solar controller

Size
136.1 × 70.6 mm
Copper layers
4
Thickness
1.6 mm
Parts
152
Nets
103
Pads
541
Tracks, vias
949, 117
Pours
10
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
29 Aug 2020
Updated
9 Mar 2023

Overview

Mppt is an open-source printed circuit board by seandepagnier, from the seandepagnier/mppt repository on GitHub. It is a 4-layer board of 136.1 × 70.6 mm with 152 parts on 103 nets, routed with 949 tracks and 117 vias.

It is built around the ST485EBDR, ESP32-WROOM-32D and LM5109MA, with the AMS1117-5.0, LM393 and BCP56 among its other parts. Its parts include 50 resistors, 35 capacitors, 24 diodes, 14 transistors and 12 ICs. It belongs with the ESP32 boards of this library.

Main components

6

README

README

MPPT charge controller for maximum power

  • free software and hardware design. Can be adapted to other requirements.
  • all ceramic capacitors.
  • buck/boost design allow either higher or lower voltage of battery vs panel.
  • components rated for up to 48 volt system (60 volt mosfets)
  • voltage and current monitoring on both input and output.
  • high-efficiency regulators to power the 3.3v logic as well as the 10v needed for gate drive.

This project uses the stm32duino environment.

Parts

152
QtyValueFootprintReferences
1710kResistor_SMD:R_0603_1608MetricR2, R3, R5, R14, R16, R18, R21, R22, R28, R33, R37, R46, R47, R50, R51, R53 +1
12DDiode_SMD:D_SOD-323FD4, D7, D8, D9, D10, D11, D12, D13, D17, D18, D19, D20
81uFCapacitor_SMD:C_1206_3216MetricC8, C9, C15, C23, C24, C27, C28, C42
6100nFCapacitor_SMD:C_0805_2012MetricC2, C6, C7, C13, C22, C32
633Resistor_SMD:R_0603_1608MetricR15, R17, R26, R27, R39, R40
6Q_NMOS_GDSmppt_footprints:TDSON-8-1Q3, Q4, Q10, Q11, Q12, Q13
5100kResistor_SMD:R_0603_1608MetricR13, R24, R30, R36, R38
510uFCapacitor_SMD:C_1206_3216MetricC14, C16, C17, C25, C45
410uFCapacitor_SMD:C_0805_2012MetricC4, C5, C12, C30
4200kResistor_SMD:R_0603_1608MetricR8, R9, R12, R23
44.7uF 100vCapacitor_SMD:C_1210_3225MetricC19, C20, C33, C34
45.6vDiode_SMD:D_MiniMELFD15, D24, D25, D27
4510Resistor_SMD:R_0805_2012MetricR10, R20, R25, R48
4Q_NPN_BECPackage_TO_SOT_SMD:SOT-23Q5, Q6, Q8, Q14
3.001Resistor_SMD:R_1206_3216MetricR11, R19, R31
31kResistor_SMD:R_0603_1608MetricR7, R32, R34
3333kResistor_SMD:R_0603_1608MetricR45, R49, R52
3Dmppt_footprints:DO-214ACD1, D2, D5
3D_Schottky_AAKPackage_TO_SOT_SMD:TO-277AD6, D14, D16
3INA180Package_TO_SOT_SMD:SOT-23-5_HandSolderingU3, U6, U9
3lm5109Package_SO:SO-8_3.9x4.9mm_P1.27mmU4, U5, U8
210Resistor_SMD:R_0805_2012MetricR29, R35
21uFCapacitor_SMD:C_0805_2012MetricC29, C31
24.7uFCapacitor_SMD:C_1210_3225MetricC3, C18
2470uFCapacitor_THT:CP_Radial_D16.0mm_P7.50mmC11, C36
2FUSEmppt_footprints:BladeFuse-CarTypeF1, F2
2ST485EBDRPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU11, U12
2TVSDiode_SMD:D_SMCTVS1, TVS2
1100uHInductor_THT:L_Toroid_Vertical_L33.0mm_W17.8mm_P12.70mm_Pulse_KM-5L3
1100uHInductor_SMD:L_10.4x10.4_H4.8L1
1120kResistor_SMD:R_0805_2012MetricR4
120kResistor_SMD:R_0603_1608MetricR1
133nFCapacitor_SMD:C_0603_1608MetricC10
133uF 100vCapacitor_SMD:C_Elec_10x10.2C1
147kResistor_SMD:R_0603_1608MetricR6
1AMS1117-5.0Package_TO_SOT_SMD:SOT-89-3U7
1APE1707H-33-HFPackage_TO_SOT_SMD:TO-252-5_TabPin3U2
1BCP56Package_TO_SOT_SMD:SOT-223-3_TabPin2Q9
1Conn_01x04mppt_footprints:rs422connectorJ5
1ESP32-WROOM-32DRF_Module:ESP32-WROOM-32U10
1GREENLED_SMD:LED_0805_2012MetricD3
1IN+mppt_footprints:screw_terminalJ3
1IN-mppt_footprints:screw_terminalJ6
1LM393Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1Micro_SD_CardConnector_Card:microSD_HC_Wuerth_693072010801J4
1OUT+mppt_footprints:screw_terminalJ7
1OUT-mppt_footprints:screw_terminalJ8
1Q_NMOS_GDSPackage_TO_SOT_SMD:SOT-23Q1
1Q_PMOS_GSDPackage_TO_SOT_SMD:SOT-23Q2
1Q_PNP_BCEPackage_TO_SOT_SMD:SOT-23Q7
1Thermistor_NTCResistor_SMD:R_0805_2012MetricTH1
1UARTmppt_footprints:uartJ2
1YELLOWLED_SMD:LED_0805_2012MetricD26
1bootmppt_footprints:SW_SPST_PTS810SW3
1menumppt_footprints:SW_SPST_PTS810SW2
1pagemppt_footprints:SW_SPST_PTS810SW1

Similar boards

  • 4 layers60 × 60 mm数控buck, the printed circuit board in 3D

    数控buck

    JasonClock/CNC_Buck

    78 parts1
  • 4 layers100 × 100 mmMotorControllerPowerBoard, the printed circuit board in 3D

    MotorControllerPowerBoard

    HEEV/motor-controller-2018

    Sam Ellicott's and Isaac Jones's motor controller senior design project. Fall 2018-Spring 2019

    134 parts4
  • 2 layers100 × 100 mmDC line module+Meter probe, the printed circuit board in 3D

    DC line module+Meter probe

    kwiecinski/BMS-and-offgrid-photovoltaic-management-system

    Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.

    100 parts3MIT
  • 2 layers30 × 54 mmUsb to rs485 over rj45, the printed circuit board in 3D

    Usb to rs485 over rj45

    aruna-rov/usb_to_rs485_over_rj45

    usb to rs485 over rj45

    24 parts4GPL-3.0
  • 2 layers99.1 × 99.1 mmCnc, the printed circuit board in 3D

    Cnc

    romanchom/cnc-pcb

    PCB designed for use with GRBL ESP32 as a CNC controller.

    54 parts1
  • 2 layers290 × 221 mmHub module, the printed circuit board in 3D

    Hub module

    tmolteno/TART-3

    The TART radio telescope, Version 3.

    280 parts1GPL-3.0
  • 2 layers63.5 × 76.2 mmDmxdude mini, the printed circuit board in 3D

    Dmxdude mini

    cyfinfaza/dmxdude-mini

    Hardware design for dmxdude DMX512/WS2812/Wi-Fi module

    89 parts
  • 2 layers105 × 70 mmTrackAmplifier, the printed circuit board in 3D

    TrackAmplifier

    jeremysiebers/Siebwalde

    Siebwalde project

    122 parts

Questions

How big is the Mppt PCB?

It measures 136.1 × 70.6 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Mppt use?

152 parts, built around the ST485EBDR, ESP32-WROOM-32D, LM5109MA and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mppt KiCad files?

From the seandepagnier/mppt repository on GitHub, at the commit this page was made from: the board is schematics/mppt.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mppt design in my own project?

Its repository states no licence, so its author keeps all rights: ask seandepagnier before reusing the design.