2 layers26.7 × 44.5 mm
Microcontroller boards
1,623 boards- 2 layers134.5 × 176.7 mm
- 2 layers68.6 × 53.3 mm
JLCPCB Platform Arduino Shield SMD
irisg12/magnetic-microbot
Magnetic microrobot manipulation system that adapts a flex PCB platform inspired by the Hackaday “2D Stepper Motor Etched on PCB” project.
19 parts - 4 layers66 × 119.3 mm
Dev board
irudoy/openmfd
That's the case. STM32 LTDC can't output INTERLACED video signal.
150 partsMIT - 2 layers34.7 × 45.2 mm
SD card
isaacmatt/SD_Card_Breakout_Board
A minimal 3.3 V microSD card breakout board designed in KiCad for SPI communication with microcontrollers. Created as a hands-on PCB design project; schematic complete and ERC-clean, with layout, fabrication, and…
9 parts - 4 layers
Smart nrp makerspace
itsebuka/PCB-Design-Core
This repository contains every single PCB that i have ever designed. The major applications used are Kicad and EasyEDA
58 partsMIT - 2 layers39.8 × 56.5 mm
Devboard
ItsStitchy/SunPi2040
This is my custom development board powered by the RP2040 chip.
38 partsGPL-3.0 - 2 layers23.3 × 47.8 mm
HyperPlex
itsThatCoderBoy/Plex-Console-Stage-1
A small devboard that will be used for emulation!
28 partsUnlicense - 2 layers30 × 20.3 mm
- 4 layers50 × 47.9 mm
- 2 layers
- 4 layers21.4 × 50.4 mm
- 2 layers94.9 × 53.3 mm
Pen Plotter Arduino Shield
jaredschiltz/Pen-Plotter-Arduino-Shield
Uno R3 Pen Plotter Arduino Shield
37 partsCC0-1.0 - 2 layers21 × 51 mm
- 2 layers69 × 53.8 mm
- 4 layers70 × 20.3 mm
- 4 layers80 × 80 mm
ESP32-Custom Development Board PCB Design
jayatharshan12-design/ESP32-Custom-Development-Board-PCB-Design
63 parts - 4 layers27.9 × 63.5 mm
- 8 layers65 × 30 mm
- 2 layers50.8 × 22.9 mm
Bts 32u4 feather
jd-boyd/bts_32u4_feather
MCU board, mostly with pinout of an Adafruit Feater, shows up as Leonardo, has USB-C connector.
6 partsCERN-OHL-P-2.0 - 2 layers15.2 × 25.4 mm
PCB LPC824M201JDH20
jdesbonnet/PCB_LPC824M201JDH20_breakout
Breakout board PCB for LPC824 in TSSOP20 package (LPC824M201JDH20, LPC822M101JDH20)
10 parts - 2 layers20.6 × 54.8 mm
- 2 layers45.7 × 54.6 mm
Nemesis Mod
jeff-winn/stryfe-mod
Just a little project to mod a Nerf blaster with Arduino compatible hardware and Bluetooth support.
6 partsMIT - 2 layers21 × 51 mm
