
LPC824 RFM9x
jdesbonnet/RFMxx_LPC812_PCB
PCB board to experiment with HopeRF RFM69 and RFM98 radio modules. Uses ARM Cortex-M0+ LPC812 as controller.

Breakout board PCB for LPC824 in TSSOP20 package (LPC824M201JDH20, LPC822M101JDH20)
PCB LPC824M201JDH20 is an open-source printed circuit board by jdesbonnet, from the jdesbonnet/PCB_LPC824M201JDH20_breakout repository on GitHub. It is a 2-layer board of 15.2 × 25.4 mm with 10 parts on 21 nets, routed with 114 tracks and 8 vias.
It is built around the LPC824M201JDH20. Its parts include 4 capacitors, 2 connectors, 1 resistor, 1 IC and 1 diode. It belongs with the interfaces and adapters and microcontroller boards boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Breakout board for TSSOP package version of LPC824 ARM Cortex-M0+ MCU.
Features:

Version 0.8.1, 2018-05-12
Changes to silk screen layer to make purpose of passive components clearer. Add link to project git repo.
Version 0.8.0, 2018-04-24
Sent to OSHPark.com for fabrication. PCB arrived 2018-05-11. Works as expected. Only thing I'd change is marking the optional bypass and LED pads more clearly. I haven't tested the crystal.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | C | Capacitors_SMD:C_0603_HandSoldering | C1, C2, C3, C4 |
| 2 | Conn_01x10 | Pin_Headers:Pin_Header_Straight_1x10_Pitch2.54mm | J1, J2 |
| 1 | Crystal | Crystals:Crystal_SMD_0603-2pin_6.0x3.5mm_HandSoldering | Crystal |
| 1 | LED | LEDs:LED_0603_HandSoldering | D1 |
| 1 | LPC824M201JDH20 | TSSOP20_handsolder:TSSOP-20_4.4x6.5mm_Pitch0.65mm | U1 |
| 1 | R | Resistors_SMD:R_0603_HandSoldering | R1 |

jdesbonnet/RFMxx_LPC812_PCB
PCB board to experiment with HopeRF RFM69 and RFM98 radio modules. Uses ARM Cortex-M0+ LPC812 as controller.



Squantor/squantorDevelBoards
Various development boards/test for microcontrollers, check for breakouts here

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

It measures 15.2 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the LPC824M201JDH20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jdesbonnet/PCB_LPC824M201JDH20_breakout repository on GitHub, at the commit this page was made from: the board is PCB_LPC824M201JDH20.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jdesbonnet before reusing the design.